GAF Construction in Ben Lomond, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

GAF Construction in Ben Lomond, CA | Brookside Contractors

We install and repair GAF roofing systems across Ben Lomond year-round, and the biggest difference here comes down to one word: WUI. Cal Fire’s Wildland-Urban Interface building standards apply to much of Ben Lomond, which means a GAF roof replacement isn’t just about shingles – it’s about the entire fire-rated assembly, from ember-resistant vents to the right underlayment. Brookside Contractors is an independent GAF service provider, not a manufacturer affiliate, so we match the material to your specific lot, slope, and exposure. Call (833) 725-3508 for a free estimate.

Contractors carrying drywall sheet into a room for home renovation in Ben Lomond, CA

Call (833) 725-3508

Why Ben Lomond Residents Choose Us for GAF Service

Nate Burrell grew up watching cheap construction fail – his dad’s garage addition fell apart three years after a low-bid crew walked off. That’s why we read GAF’s installation specs closely and build every roof to the assembly that Ben Lomond’s climate and code actually demand, not just the shingle that’s on sale. Our crews know how GAF Timberline HDZ and UHDZ hold up under atmospheric river rainfall, and we know where the failures typically start on older mountain cabins: rake edges, eave lines, and under-vented attics. We also bring GAF in Lompico experience to similar mountain conditions here. We use GAF’s own accessory components – starter strips, ridge caps, and underlayments – because mixing brands can void the shingle warranty and compromise the assembly’s fire rating. When a roof is repairable, we replace only the damaged shingles and flashing. When decking or underlayment has failed across multiple planes, we tell you straight that a full replacement is the better investment. One contractor, every phase – from tear-off to final inspection.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common GAF Construction Problems We Solve in Ben Lomond

  • Wind-driven rain at rake and eave edges. Atmospheric river events push water under field shingles where GAF starter strip or rake edge metal was installed without adequate sealant or overlap. We see this constantly on Ben Lomond homes with exposed ridgelines and north-facing roof planes. The result is fascia rot and interior leaks that owners don’t notice until paint blisters or drywall stains show up.
  • Premature granule loss and curling on under-vented cabins. Older wood-sided cabins in Ben Lomond often have minimal attic ventilation. GAF Timberline shingles trap heat and moisture in those spaces, leading to granule loss, curling, and deck delamination that only reveals itself after a wet winter. We check ventilation before we quote any replacement.
  • Ember intrusion through outdated vents. Pre-2000 Ben Lomond homes frequently have open soffit or ridge vents. Even when the shingles are Class A rated, embers can ignite the roof deck from below through those vents. Fire-hardening a GAF roof here means upgrading the venting, not just the shingle.
  • Algae streaking and moss on shaded north planes. Redwood-shaded lots keep north-facing roof planes damp through winter. GAF shingles without the manufacturer’s algae-resistant granules develop streaking and moss within a few seasons. We match the shingle spec to the shade load on your specific lot.
  • Rusted drip edge and rotted fascia along rakes. Years of storm runoff concentrates at the lower edges of steep roofs. Original builder-grade drip edge rusts through, and the fascia behind it rots. We replace both before the new GAF system goes on – it’s the only way the edge detail holds.

GAF Service in Ben Lomond: What Local Conditions Mean for Your Equipment

Here’s the thing most flatland roofing contractors don’t grasp about Ben Lomond: Cal Fire’s WUI building standards apply to nearly every lot in the 95005 ZIP, and that changes what a GAF roof replacement actually involves. Many older homes in the Brookside Avenue and Alba Road areas were built decades ago under codes that didn’t require fire-rated venting. Our Brookdale GAF service covers similar WUI retrofit work nearby. Today, when you pull a permit for a new GAF roof, the county often asks for documentation that the venting and edge metal match a Class A fire-rated assembly. That means ember-resistant vents, not the open box vents that have been up there since the 1980s. It means you can’t just swap shingles and call it done – the entire assembly gets reviewed. For GAF owners, this is actually good news: the shingle warranty stays intact, the fire rating is real, and your insurance carrier will see the difference. We handle the documentation package so the inspection doesn’t stall.

GAF Models & Products We Service in Ben Lomond

We install and repair the full GAF shingle lineup: Timberline HDZ, Timberline UHDZ, Grand Sequoia, and Duration. For Ben Lomond’s steep, shaded, and wildfire-exposed lots, we stock GAF Seal-A-Ridge caps, StormGuard and Deck-Armor underlayments, and ember-resistant vent systems locally so we’re not waiting on a supply house in San Jose to start your roof. OEM parts matter here. Aftermarket ridge caps or generic starter strips can break the shingle warranty and lower the assembly’s fire rating. We use GAF components end to end because the manufacturer engineered them to work as a system. Need GAF sales & service expertise applied to your specific roof? That’s the work we do every week in the Santa Cruz Mountains.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

GAF Service Pricing in Ben Lomond

What drives the cost of GAF work in Ben Lomond is what’s under the shingles – and what the county requires on top of them. Steep access, tear-off disposal, WUI documentation, and ember-resistant vent upgrades all factor in. Here’s what you can expect:

Service Typical Range
Roof Replacement (GAF) $8,000 – $20,000
Roof Repair $400 – $1,800
Metal Roof Installation $15,000 – $40,000
Emergency & Storm Damage Repair $400 – $1,800

Every estimate is free and written line by line, with the GAF components called out by name. You’ll know what the shingles cost, what the underlayment costs, and what the venting upgrade adds. Fixed pricing means no change orders unless you change the scope. Call (833) 725-3508 to schedule yours.

Serving Ben Lomond, CA — Our Local Coverage Area

We’re based in the Ben Lomond area and know this community well, with GAF service in Felton and surrounding mountain towns. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – GAF Construction in Ben Lomond

Service Areas Near Ben Lomond

We work throughout the Santa Cruz Mountains and South Santa Clara County. If you’re in Ben Lomond service area proper or in Morgan Hill, San Martin, Gilroy, Corralitos, or Day Valley, we can typically reach you within a day for storm damage and within the week for planned replacements. We also serve GAF service in Prunedale and GAF service in Cupertino for homeowners just outside the mountain corridor.

Book Your GAF Service in Ben Lomond Today

Storm damage can’t wait, so we keep emergency response slots open during atmospheric river season. Call Nate and the team at (833) 725-3508 for a free estimate on your GAF roof repair or replacement in Ben Lomond. Do it once, do it right – everything else is just a future repair bill.

Written by Nate Burrell, Owner & General Contractor, Brookside Contractors, serving Ben Lomond, Mount Hermon GAF service, and the Santa Cruz Mountains.

Need Construction help in Ben Lomond? Licensed & insured · Free on-site estimates response · free estimates
Call (833) 725-3508
Areas We Serve

Request a Free Estimate in Ben Lomond

Tell us what you need — Brookside Contractors responds fast. No obligation.

By providing your information above, you acknowledge our Privacy Policy and authorize us to contact you by phone, email, or text about your service request, including from the local pros who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch