Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Lexington Hills, CA | Brookside Contractors
If you’re in Lexington Hills and need work done on CGI cabinets, countertops, or a full kitchen, here’s the short answer: we’re an independent contractor that services, installs, and repairs CGI product lines throughout the 95031 ZIP, and what separates our work here from our CGI repair in Scotts Valley or work done in San Jose is simple. Nearly every Lexington Hills kitchen job runs through Santa Cruz County’s high-fire-hazard permitting process. That changes what gets specified, what gets installed, and what actually passes inspection. Our team, led by Nate Burrell, handles CGI work from a mountain-cabin perspective, not a showroom perspective. Call (833) 725-3508 for a free estimate.
Why Lexington Hills Residents Choose Us for CGI Service
Nate Burrell grew up around Morgan Hill and trained in construction technology at Gavilan College in Gilroy. He’s spent the better part of two decades on job sites throughout South Santa Clara County, including plenty of Lexington Hills work where the access is tight and the permit review is tighter. That’s why our approach to CGI service starts with how the product actually lives in a Lexington Hills house, not how it looks on a sample board.
We work as an independent contractor, not a factory rep. That distinction matters. We source OEM CGI hinges, slides, and touch-up finishes when they’re still in production, and we’ll pair them with quality aftermarket soft-close hardware when the box is sound but the fittings are shot. We’ll also level with you: if a CGI cabinet run is worth re-facing and re-hanging, we’ll say so. If the carcass is swollen particleboard, we’ll tell you replacement is the honest fix. Most Lexington Hills homes we walk into were built between the 1960s and 1980s, which means out-of-level floors, uninsulated kitchens, and wood stoves pushing heat into cabinet faces. That’s the reality we plan around.
Styles & brands we work with
Common CGI Construction Problems We Solve in Lexington Hills
- Racked and loosened RTA cabinet boxes. CGI ready-to-assemble cabinets use cam-lock and dowel joints. Mountain temperature swings, especially the hot-dry-summer to cold-wet-winter cycle Lexington Hills gets every year, work those joints loose over time. We routinely find racked boxes and sagging shelves in 1970s and 80s cabins where a CGI run went in on a floor that was never leveled to begin with.
- Thermofoil and laminate door face delamination. Near wood stoves and in uninsulated summer kitchens, the heat cycling causes CGI thermofoil and laminate door faces to peel at the edges. This is common in Lexington Hills cabins where the kitchen shares a wall with the stove and the cabin never had proper insulation. We see it, we know why it happens, and we’ll tell you whether refacing or replacement is the smarter money.
- Swollen particleboard backs and bases. A cabin’s older plumbing or a winter storm leak sends moisture behind a cabinet run, and particleboard-core or thin-panel backs swell and crumble. Lexington Hills gets heavy rain, and a slow leak in a 1980s cabin kitchen can destroy a composite cabinet base before you see the water. Plywood-box CGI lines survive this; composite doesn’t.
- Gaps at seams and scribes from out-of-plumb walls. Cabinet runs installed against walls that aren’t plumb open up at the seams and at countertop scribes. Crown gaps and caulk lines fail sooner. We correct the install, not just the cosmetic gap.
- Countertops that never sit flat. A CGI quartz or granite top fabricated for a spec-built floor plan rarely matches a Lexington Hills cabin’s actual floor. Slopes, settled foundations, and uneven subfloors mean the template and fabrication have to account for real conditions, not showroom assumptions.
CGI Service in Lexington Hills: What Local Conditions Mean for Your Equipment
Because nearly every Lexington Hills kitchen project pulls a Santa Cruz County permit in a high-fire-hazard zone, cabinet and countertop choices here get reviewed against Chapter 7A-style ignition-resistant construction standards. This is a detail that rarely comes up in Scotts Valley or San Jose, and it directly shapes which CGI finishes and substrates we specify. For instance, a laminate or thermofoil door face that might pass a visual review in a San Jose kitchen can get flagged here if the planning reviewer determines the material undermines the structure’s ignition-resistance profile. The wildland-urban interface code isn’t only about roofs and siding. The county has increasingly scrutinized kitchen materials in rebuilt and remodeled mountain homes, particularly when a project triggers a major remodel threshold. That means we’re not just picking finishes that look right. We’re picking finishes that clear review and hold up against ember exposure, heat, and moisture cycles. On a cabin off Old Santa Cruz Highway, our tech had to stage an entire CGI cabinet order at the bottom of the drive and shuttle it up in a smaller truck because the concrete delivery lane was too narrow for anything larger. Once inside, we found the old CGI boxes racked and the floors out of level by nearly two inches, so we re-leveled the run, replaced swollen bases with plywood-box units, and set a new quartz top that finally scribed clean to the walls. That’s what Lexington Hills CGI work actually looks like.
CGI Models & Products We Service in Lexington Hills
We work on the full CGI product range: ready-to-assemble all-plywood kitchen cabinets, pre-assembled drawer-base and sink-base cabinet lines, frameless and full-overlay door styles with thermofoil and painted finishes, and CGI quartz and granite countertop programs that are fabricated through local stone shops. When parts are needed, we source OEM CGI hinges, slides, and touch-up finishes where they’re still in production, and we stock common hardware locally so a Lexington Hills repair isn’t waiting on a warehouse across the country. You’ll find our approach to CGI sales & service is built around matching what’s on your walls to what actually works in a mountain house.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Lexington Hills
What we charge depends on what the job actually involves: a cabinet re-level and hinge replacement is a different scope than a full kitchen remodel with countertop replacement. Here’s the range for Lexington Hills:
| Service | Typical Range in Lexington Hills |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
A free estimate from us includes an on-site look at what you have, what needs to be corrected, and a written line-item quote. No change orders, no surprises. Call (833) 725-3508 to set one up.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well, and we also offer Los Gatos CGI service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Lexington Hills
Yes. We routinely stage cabinet and countertop deliveries at the bottom of a drive and shuttle materials up with smaller trucks when the final approach is too tight for a standard delivery vehicle. Roads off Old Santa Cruz Highway are narrow, and we plan for that before the order is even placed, just as we do for CGI service in Monte Sereno. Call (833) 725-3508 and we’ll talk through your specific access.
It depends on the finishes and substrates you choose. The county reviews kitchen material selections under Chapter 7A-style ignition-resistant construction standards when a major remodel or rebuild is triggered. Thermofoil and laminate faces can be a problem. Painted or plywood-box CGI lines with the right hardware and hardware placement generally clear review without issue. We’ll help you pick what passes before you spend money.
If the boxes are plywood and square, refacing is usually the right move. If the boxes are particleboard and have taken moisture, replacement is the honest fix. We’ll inspect the carcasses and tell you straight. Call (833) 725-3508 for an on-site assessment.
Slope and winter storms affect what we can get up the drive and when we can schedule deliveries and heavy equipment. Red-flag warnings halt hot work, and heavy rain creates mudslide and erosion concerns on steep lots. We sequence the job so interior phases continue through weather windows, with erosion control in place during the rainy months, similar to how we handle CGI repair in Cambrian Park. We’ll walk you through the timeline at your free estimate.
Yes. We handle the template, fabrication, and installation for CGI quartz and granite countertops through local stone shops we’ve worked with for years. We measure against the actual floor and wall conditions in your Lexington Hills home, not a spec sheet. Call (833) 725-3508 to schedule a measurement.
Service Areas Near Lexington Hills
Our CGI service covers Lexington Hills and nearby areas including Morgan Hill, San Martin, Gilroy, Corralitos, and Day Valley. We also work in Lexington Hills service area throughout the 95031 ZIP. For coastal neighbors, see CGI service in La Selva Beach and CGI service in Seacliff.
Book Your CGI Service in Lexington Hills Today
Do it once, do it right – everything else is just a future repair bill. That’s how Nate runs a job, and it’s how we run a CGI kitchen in Lexington Hills. Call (833) 725-3508 and tell us what you’re working with.
Written by Nate Burrell, Owner at Brookside Contractors, serving Lexington Hills and greater Santa Clara County.