Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Los Altos, CA | Brookside Contractors
We’re an independent crew that installs and fits CGI cabinetry, countertops, and vanity lines across Los Altos’s 1940s – 1970s ranch and Eichler-era homes. We’re not affiliated with or authorized by CGI. What makes our CGI work different here is the entitlement friction: tree-protection root-zone setbacks, hillside design review, and mature-lot rebuilds mean most cabinet and countertop layouts get reshaped before a permit is even issued. Call (833) 725-3508 for a free estimate on your Los Altos project.
We’ve spent years setting CGI boxes into homes where the original subfloor hasn’t been level since the Nixon administration. That matters more than any spec sheet. If you’re planning a kitchen remodel, cabinet reface, or quartz countertop replacement in the 94022, 94023, or 94024 ZIPs, we’ll tell you honestly whether your existing run is worth saving or whether the carcass has to go.
Why Los Altos Residents Choose Us for CGI Service
CGI makes a solid cabinet line. But in Los Altos, the cabinet is only half the story. The other half is what’s behind it: out-of-level original slab, galvanized supply lines weeping into the toe kick, and walls that haven’t been square since the house was framed sixty years ago. We know how CGI boxes and finishes behave once a mature-lot rebuild or second-story addition starts moving walls.
Nate Burrell, our owner and general contractor, grew up watching cheap crews walk off jobs in South Santa Clara County and leave homeowners holding the repair bill. He trained in construction technology at Gavilan College and spent two decades on job sites before leading our team. His rule on every Los Altos project: “Do it once, do it right – everything else is just a future repair bill.” That’s why we level and block before we set a single cabinet, and why we’ll reface a sound carcass instead of selling you a full tear-out you don’t need.
We’re local to the area and we know which Los Altos homes have the tight kitchens, the low-slope roofs, the knob-and-tube surprises behind the drywall. When you call us for CGI work, you’re talking to people who’ve already worked on your street or one like it.
Styles & brands we work with
Common CGI Construction Problems We Solve in Los Altos
- Racked doors and gapped drawer fronts on out-of-level floors. Older Los Altos ranch homes settle. Original subfloor runs out of square by an inch or more across a kitchen. When CGI boxes go straight onto that floor, the doors rack within a season. We level and block the entire run before the first cabinet comes out of the box.
- Swollen cabinets from cast-iron and galvanized plumbing leaks. Los Altos homes built in the 1940s – 1970s still carry original supply and drain lines. A slow seep behind the base cabinet is invisible until the particleboard or MDF carcass starts to swell and the finish fails. When we pull old cabinets during a remodel, we check the plumbing before anything new goes in.
- Delaminated thermofoil over the cooktop. Eichler-era and low-slope kitchens in Los Altos trap heat and moisture near the range. CGI thermofoil and laminate faces on upper doors over the cooktop can peel at the edges after a few years of that. We see it most in original kitchens that never got a proper range hood.
- Humidity swings near exterior walls and slab edges. In tree-canopied Old Los Altos and North Los Altos yards, damp shade under mature oaks and redwoods pushes interior humidity up and down. CGI cabinet life shortens near exterior walls and slab edges in exactly those spots. We account for that when we spec finishes and clearances.
- Layouts that die at permit review. A rear-yard heritage oak or redwood can legally postpone or reshape a foundation plan under Los Altos’s tree-protection ordinance. If your cabinet layout depends on a wall that the arborist’s root-zone report just moved, we rework it before you’ve spent a dollar on materials.
CGI Service in Los Altos: What Local Conditions Mean for Your Cabinets
Los Altos is not a volume construction market. It’s a rebuild-or-expand market. Most of the work in Old Los Altos, North Los Altos, and Loyola CGI service areas involves tear-downs or second-story additions on mature lots, and every one of those projects has to clear hillside design review, single-story-neighborhood rules, and tree-preservation ordinances before the city issues a permit. Architects, arborists, and neighbors all sit between a contractor and a groundbreaking.
For CGI owners, that changes the sequence of decisions. A heritage oak in the rear yard can push a foundation line in by eight feet. That moves the kitchen wall. That changes the cabinet run. We’ve had projects where the arborist’s root-zone setback forced us to shift a frameless CGI run from a rear addition to an interior wall, and the entire island layout had to shrink to match. In Los Altos, you don’t buy cabinets first and hope the permit works out. You get the tree report, then the permit, then the cabinets. We plan in that order.
CGI Models & Products We Service in Los Altos
We work with CGI Ready-to-Assemble (RTA) Shaker cabinets, CGI semi-custom framed and frameless lines, CGI quartz and granite countertop programs, and CGI bath vanity and linen cabinet lines. We stock CGI’s own hinges, drawer hardware, and touch-up kits for fast Los Altos turnaround, and we use quality aftermarket soft-close slides and levelers where they outlast the OEM part at similar cost. When a carcass is still sound, we reface or replace doors and hardware instead of tearing out the whole run. When water damage has compromised the box, replacement is the honest call. Need a closer look at what we service? See our full CGI sales & service page.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Los Altos
What drives CGI cost in Los Altos is rarely the cabinet itself. It’s the prep work: leveling a 60-year-old subfloor, replacing galvanized plumbing behind the run, or reworking a layout after the arborist’s report comes back. Here’s what we’re seeing for projects across Los Altos:
| CGI Project | Typical Los Altos Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation (full run) | $4,000 – $13,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
Our free estimate includes a look at the floor, the plumbing, and the permit picture. If you’re inside the Los Altos service area, we’ll come out and give you real numbers, not a range pulled from a national calculator. Call (833) 725-3508 to schedule.
Serving Los Altos, CA — Our Local Coverage Area
We’re based in the Los Altos area and know this community well, including CGI service in Mountain View nearby. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Los Altos
Yes. We’re a our General Contractor in Los Altos, not a cabinet-only shop. When we pull old cabinets in a Los Altos home and find galvanized supply lines seeping into the base cabinets, or a panel that’s undersized for modern appliances, we handle that work directly. One crew, one point of accountability, no “call your plumber and we’ll come back in three weeks.” Call (833) 725-3508 and we’ll walk you through what your specific remodel is likely to uncover.
No. We’re an independent general contractor. We’re not affiliated with, authorized by, or endorsed by CGI. We choose their lines where the fit makes sense for the home that’s actually there, and we pair them with other brands across our full roster when a different product suits the project better.
A straightforward cabinet replacement in a level kitchen runs three to five days from demo to set. A full remodel with plumbing, electrical, countertops, and backsplash runs four to eight weeks. If tree-protection review or hillside design review is involved, the permit clock runs on the city’s schedule, not ours. We’ll give you a realistic timeline at the estimate, and we’ll hold to it.
CGI Ready-to-Assemble (RTA) Shaker cabinets, semi-custom framed and frameless lines, quartz and granite countertop programs, and bath vanity and linen cabinet lines. If you have a CGI product that’s not on that list, call us. If it’s a line we know well, we’ll tell you. If it’s not, we’ll tell you that too.
Cabinet installation runs $4,000 – $13,000 for a full run. Countertop installation runs $2,000 – $6,500. If your subfloor needs leveling, your plumbing needs replacing, or your layout has to shift for tree-protection reasons, those costs are line items we flag at the estimate, not surprises we spring mid-job. We write fixed-price quotes with no change orders unless you change the scope. Call (833) 725-3508 for an exact quote – estimates are free.
Service Areas Near Los Altos
We work throughout the South Bay and Santa Clara County. If you’re in Los Altos Hills dealing with WUI fire-hardening requirements or hillside review, we know that permit path. In Palo Alto, we see the same Eichler-era and ranch-era stock with its own set of entitlement rules. We also serve Morgan Hill, San Martin, and Gilroy for CGI work.
Book Your CGI Service in Los Altos Today
If you’re planning a Los Altos kitchen remodel, cabinet reface, or countertop replacement with CGI products, call us at (833) 725-3508. We’ll come out, look at the floor and the plumbing and the trees, and give you a straight answer on what it’ll cost. Estimates are free.
Written by Nate Burrell, Owner at Brookside Contractors, serving Los Altos and the surrounding South Bay.