Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Half Moon Bay, CA | Brookside Contractors
We’re an independent Half Moon Bay contractor that installs and services CGI cabinetry, countertops, and finish materials across the 94019 ZIP. We are not authorized by or affiliated with CGI as a manufacturer, and we don’t pretend to be. The thing that sets our CGI work apart here is that every cabinet box, hinge, glide, and countertop seam gets specified for salt fog, coastal humidity, and the review stack that comes with building in the California Coastal Zone. Call (833) 725-3508 for a straight answer on your project.
If you’re planning a kitchen remodel, cabinet reface, or countertop replacement in Half Moon Bay, the material decisions you make in week one decide whether you’re calling us back in three years or fifteen. That’s not marketing talk. That’s what marine air does to stock hardware and untreated edges. We’ve been through enough Half Moon Bay kitchens to know exactly where the failures show up first, and we plan around them from day one. The same coastal conditions affect our Moss Beach CGI service calls. Our crew handles full kitchen remodels, cabinet installation and refacing, quartz and granite countertops, backsplashes, and island builds under one roof and one point of accountability.
Why Half Moon Bay Residents Choose Us for CGI Service
Half Moon Bay homeowners don’t need another contractor who treats this town like any other Bay Area suburb. The coastal fog belt doesn’t care about your schedule. The salt air gets into everything. Nate Burrell, our owner, learned early that materials fail predictably when you ignore the environment they live in, and he trains our crews to think in those terms on every job. That’s why we can look at a CGI cabinet run and tell you before the install whether the stock hinges will seize, whether the toe kicks will swell, and whether the countertop slab needs blocking before it gets set. It’s the same assessment we run on CGI in Montara.
We also carry the full scope to do the job correctly the first time. When a kitchen remodel exposes a rotted sill plate behind a sink base, we don’t call in another contractor and wait. We fix the framing, re-flash the wall, and set the new boxes on hardware that belongs in a coastal house. One contractor, every phase.
For CGI products specifically, we keep OEM hardware and touch-up materials on hand for the repairs where they’re appropriate, and we stock corrosion-rated hinges, glides, and stainless fasteners for the coastal installs where stock CGI components won’t last. You pick the cabinet line. We match the material to the project and the project to the conditions.
Styles & brands we work with
Common CGI Construction Problems We Solve in Half Moon Bay
We see the same failure patterns over and over in Half Moon Bay kitchens. They’re not CGI defects. They’re what happens when stock coastal-spec decisions get made for inland conditions.
- Salt-corroded drawer glides and hinges. Standard steel hardware in a CGI box starts grinding and seizing within a few seasons of fog-belt humidity, especially in unheated kitchens and garages near the harbor side of town. We swap in corrosion-resistant or stainless components and re-align the drawer faces so the boxes run smooth again.
- Swollen MDF and particleboard cores along toe kicks and sink bases. Half Moon Bay’s morning fog keeps exterior walls damp for hours each day. When a CGI cabinet sits against an unflashed or poorly flashed exterior wall, the bottom edges wick moisture and swell until the panels delaminate. We replace the swelled boxes, correct the moisture source behind them, and re-set with marine-grade flashing.
- Loose RTA assembly joints that rack out of square. CGI ready-to-assemble lines rely on cams and dowels that hold fine in a dry shop. On a Half Moon Bay wall with chronic condensation, those connections work loose and the whole run starts to twist. We re-square, re-glue, and where needed, rebuild the box from new plywood components.
- Seam stress and edge chipping on quartz and granite tops. Older single-family homes in Half Moon Bay settle. Floors slope, cabinets drift, and a slab set over an out-of-level run without blocking develops seam stress and chips within years. We level, shim, and block before the stone goes down.
- Coastal review delays misdiagnosed as supply chain problems. When a Half Moon Bay kitchen remodel touches an exterior wall, venting, or elevation and the lot sits inside the Coastal Zone or FEMA floodplain, the permitting review is longer than an inland job. We sequence the work around that stack from the start instead of promising an install date that can’t happen.
CGI Service in Half Moon Bay: What Local Conditions Mean for Your Equipment
Half Moon Bay’s buildable lots sit inside both the California Coastal Zone and FEMA-mapped floodplain in low-lying areas near the harbor and creeks, which means even a kitchen or cabinet change that touches exterior walls, venting, or floor elevation can pull coastal development review and floodplain documentation on top of the standard building permit. Inland Bay Area kitchens never see that review stacked on a cabinet swap. Here, it’s routine. That review sequencing, not cabinet lead time, is usually what sets our install dates, and it’s the first thing we check before we quote a date. Off Poplar Avenue near downtown, we pulled a CGI cabinet run during a kitchen remodel on a mid-century ranch and found the sink base and toe kick swollen solid from years of fog-belt humidity wicking in through an unflashed exterior wall. We’ve seen the same pattern on CGI in El Granada coastal homes. Because the lot sat in the coastal review stack, we documented the moisture source, replaced the rotted subfloor and sill plate with treated lumber and marine-grade flashing, then reset the run on corrosion-rated glides with new CGI plywood boxes instead of trying to salvage the swelled cores. That job taught us something we already knew but keep re-learning: in Half Moon Bay, the cabinet problem is almost never just the cabinet.
CGI Models & Products We Service in Half Moon Bay
We work with the full CGI product range that shows up in Half Moon Bay kitchens and baths. That includes the CGI Ready-to-Assemble all-plywood cabinet lines, the plywood-box shaker and slab door cabinet collections, the quartz and granite countertop programs, and the bath vanity and linen cabinet lines.
On repair work, we use OEM CGI hardware and touch-up materials where they’re available and appropriate. On coastal installs, we spec corrosion-rated hinges, glides, and stainless fasteners in place of the stock hardware. Our stance on repair versus replace is simple: CGI boxes that are sound and square get re-faced or re-hardwared rather than replaced. Water-swollen MDF cores, delaminated panels, and salt-frozen hardware mean replacement, because repairing a swollen core only delays the next failure. This is the honest distinction we walk every client through before a single box gets ordered. For broader CGI sales & service questions, we can talk through what’s worth salvaging and what isn’t.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Half Moon Bay
Pricing for CGI work in Half Moon Bay tracks the same ranges as the broader Bay Area market, with one local variable: the condition of what’s behind the cabinets. We quote line items, not round numbers pulled from a national chart. Here’s what to expect:
| Scope | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What moves the number is what the walls reveal. A kitchen with dry framing and clean subfloors falls at the low end. A kitchen with swelled sheathing, rotted sills, or coastal review requirements lands higher, because we fix the source before we set the cabinets. Every estimate is free and written as a line-item quote. Call (833) 725-3508 and we’ll come out, open the walls where needed, and tell you what you’re actually dealing with.
Serving Half Moon Bay, CA — Our Local Coverage Area
We’re based in the Half Moon Bay area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Half Moon Bay
Stock CGI hinges, glides, and leg levelers are not built for a marine environment, and in Half Moon Bay they typically start grinding or seizing within three to five years. We specify corrosion-rated or stainless replacements on coastal installs, which costs a bit more up front and eliminates the callback later. Call (833) 725-3508 if you’re wondering what’s currently on your boxes.
Moisture is wicking in from an exterior wall that was never flashed correctly, and the MDF or particleboard core is absorbing it through the toe kick. You can replace the box, but until the moisture source behind the cabinet is fixed, the next one swells too. We locate the path, correct the flashing, and then set a new plywood box on corrosion-rated hardware. Call (833) 725-3508 for an exact diagnosis.
Yes, if the lot sits in the California Coastal Zone or a FEMA-mapped floodplain and the work touches exterior walls, venting, or floor elevation. That stacked review happens routinely here, and it can add weeks to the permit timeline. We check the property’s coastal and floodplain status before quoting an install date, so you’re not waiting on a date that was never real. Call (833) 725-3508 and we’ll pull your parcel’s status first.
If the boxes are square, the plywood is sound, and the hardware isn’t salt-seized, refacing works. We re-face with new doors and panels, swap in corrosion-rated hardware, and you keep the underlying structure. If the cores are swollen or the joints are racked, replacement is the honest answer, because refacing a failing box just moves the failure date. Call (833) 725-3508 and we’ll tell you which path your kitchen is on.
Quartz itself is not porous and won’t absorb the fog-belt moisture the way a wood or MDF surface would. But the slab will fail early if it’s set over out-of-level cabinets without blocking, because coastal homes settle and the seams take the stress. We level, shim, and block before the slab goes down, then seal the seams properly. That’s the difference between a seam that holds fifteen years and one that chips in three. Call (833) 725-3508 for a quote on your kitchen.
Service Areas Near Half Moon Bay
We serve Half Moon Bay and the surrounding coastal and valley communities from our base in Morgan Hill, including San Martin, Gilroy, Corralitos, Interlaken, and Day Valley. If you’re a bit further up the Peninsula, see our CGI service in Burlingame or CGI service in Hillsborough pages. And for the full picture of where we work, see our Half Moon Bay service area page.
Book Your CGI Service in Half Moon Bay Today
If you’re ready to get a real answer on your Half Moon Bay kitchen, call (833) 725-3508 for a free estimate. We’ll come out, look at what’s behind the walls, check your coastal and floodplain status, and give you a written line-item quote. Do it once, do it right – everything else is just a future repair bill.
Written by Nate Burrell, Owner at Brookside Contractors, serving Half Moon Bay and the surrounding coastal communities.