Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Brisbane, CA | Brookside Contractors
We’re Brookside Contractors, and we install and service CGI kitchen and bath cabinetry throughout Brisbane. We’re an independent contractor, not an authorized CGI dealer, which means we match the brand’s cabinet lines to the city’s unusually steep, geologically active lots without trying to sell you a manufacturer’s default spec. If you’re planning a kitchen remodel, cabinet refacing, or vanity install in 94005, call (833) 725-3508 for a free estimate.
Why Brisbane Residents Choose Us for CGI Service
CGI sells a wide range of kitchen and bath cabinetry through dealers, and most of the time the person who installed it knew flatland construction. Brisbane is not flatland. The hillsides off Crocker and along the Visitacion Valley-facing slope shift, settle, and hold moisture in ways that reveal exactly where a cabinet brand cuts corners on box construction or hardware. We service CGI shaker-profile painted and stained door styles, Euro-style full-overlay frameless lines, and both plywood-box and particleboard-box construction, so we know what’s fixable and what’s not worth saving.
Nate Burrell, our owner and general contractor, trained in construction technology at Gavilan College and spent the better part of two decades on job sites where slope movement and moisture intrusion were daily realities. His rule is simple: do it once, do it right. Everything else is just a future repair bill. That’s the lens through which we look at every CGI cabinet run in Brisbane.
Styles & brands we work with
Common CGI Construction Problems We Solve in Brisbane
- Racked and sagging frameless boxes on settled hillside floors. When a mid-century Brisbane house settles or a slab on old fill shifts, a CGI frameless base run goes out of level, doors drag, and reveal lines wander. We diagnose whether the problem is the cabinet, the floor, or both before anyone starts yanking boxes.
- Swollen particleboard boxes and toe kicks from fog-belt moisture. Cabinet boxes sitting against cold exterior walls absorb condensation and wind-driven rain that wicks through the gap at the San Bruno Mountain and bay opening. Particleboard swells, laminate pops, and toe kicks crumble. We replace what can’t be saved with moisture-resistant stock.
- Soft-close hinges and drawer slides failing prematurely. CGI hardware is fine in a square room, but in Brisbane homes with out-of-plumb walls, the carcass twists and the hardware fights the misalignment until the damper and clip give out. We replace with OEM-compatible or quality aftermarket hardware rated for the load.
- Edge banding lifting and door faces delaminating on exposed walls. Painted and thermofoil CGI door faces on southwest exposures take fog condensation overnight, then direct sun by afternoon. The thermal cycle breaks down edge banding and delaminates thermofoil corners, especially on hillside kitchens with full western exposure.
- Cabinet runs installed without accounting for seismic and slope movement. Brisbane’s hillside additions and infill lots need cabinets anchored and shimmed differently than flatland jobs. We see CGI runs where the installer leveled once and walked away, so the first wet season shifted the whole assembly out of square.
CGI Service in Brisbane: What Local Conditions Mean for Your Equipment
Most of Brisbane’s building stock sits on or near landforms that keep geotechnical engineers busy, and that shapes how we handle any CGI cabinet scope here. The city’s planning counter scrutinizes hillside grading and geotech reports before a hillside addition or kitchen bump-out can be approved, so any cabinet project that moves a wall on a sloped lot gets sequenced around a soils engineer’s report. That’s a step a flatland kitchen in neighboring South San Francisco never triggers. In the flats south of Sierra Point, we see older industrial and mid-century stock where unpermitted work from decades past means floor plates aren’t where the tax record says they are. On Crocker hill, we see kitchens that have moved downhill with the slope. The practical upshot: in Brisbane, we don’t hang cabinets first and check level after. That’s backwards for this city.
CGI Models & Products We Service in Brisbane
We work on CGI’s Euro-style frameless full-overlay lines, shaker-profile painted and stained door styles, plywood-box and particleboard-box cabinet runs, and the CGI quartz and granite countertop programs sold through dealers. When a hinge or slide fails, we use CGI-compatible OEM hardware where the part is still available and quality aftermarket components where the OEM part is discontinued or was underspecified for the job. We keep common replacement hinges, slides, and touch-up finishes stocked for fast turnaround across Brisbane’s single ZIP, 94005, because waiting three weeks for a discontinued CGI clip is not how anyone wants to live with a kitchen that won’t close.
On a Crocker hill home off Sierra Point, an uphill kitchen had slid with the slope, and the CGI frameless base run was racked badly enough that doors rubbed and two soft-close hinges had snapped. We pulled the boxes, sistered and shimmed the floor to level, re-hung the sound CGI boxes on new aftermarket hinges and slides, and replaced the swollen particleboard toe kick with moisture-resistant stock before the quartz went back down. That’s the difference between treating the symptom and treating the site.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Brisbane
| Service | Typical Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation & Refacing | $4,000 – $13,000 |
| Quartz & Granite Countertops | $2,000 – $6,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Every estimate is free and written line-item by line-item, so you see the slab and grading work separately from the cabinet scope. If a hillside kitchen needs floor leveling before CGI boxes go back, that’s in the quote, not a change order after demo. Call (833) 725-3508 and we’ll walk the site first.
Serving Brisbane, CA — Our Local Coverage Area
We’re based in the Brisbane area and work with a trusted Brisbane General Contractor who knows this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Brisbane
Why do my CGI cabinet doors drag within a couple of years in a Brisbane hillside home?
Because the floor moved, not the cabinet. Brisbane’s expansive hillside soils and settled mid-century foundations let base runs go out of level, and a frameless CGI box has no face frame to hide the racking. Doors drag and reveal lines wander. We level and re-hang before replacing boxes that are still sound. Call (833) 725-3508 and we’ll tell you which one your kitchen needs.
Does a CGI kitchen remodel in 94005 need a geotech report?
If the project moves a wall or changes structural loading on a sloped lot, yes. Brisbane’s planning department reviews hillside grading and geotech reports closely, and we sequence cabinet and countertop scope around that approval so you don’t have finished work sitting behind a permitting delay. Flatland cabinet refacing usually doesn’t trigger it.
Can you reface rather than replace CGI cabinets that swelled from fog-belt moisture?
It depends on the box material and where the swelling is. Particleboard boxes against exterior walls that have wicked moisture are usually done, but plywood-box CGI lines with surface laminate damage often reface fine. We’ll tell you honestly which one you have before you spend on refacing that won’t hold.
Are CGI vanity boxes a bad choice for a Brisbane bathroom on an exterior wall?
Particleboard vanity boxes on a cold, damp exterior wall will eventually swell here. That’s not a CGI-specific flaw, it’s what particleboard does in a fog-belt house. We recommend plywood-box vanities or moisture-resistant backer details on those walls, and we quote both options.
Is Brookside Contractors authorized by CGI?
No. We are an independent contractor and CGI service provider. We are not authorized, sponsored, or endorsed by CGI, and we don’t imply otherwise. What we offer is installation and repair experience with the brand’s real failure modes plus honest repair-or-replace advice. Call (833) 725-3508 for a free estimate.
Service Areas Near Brisbane
We serve the full 94005 corridor and nearby communities, including South San Francisco, Daly City, Pacifica, and Visitacion Valley in San Francisco. Check our CGI service in Pacifica page for coastal fog-belt work on the other side of the mountain, or CGI service in Visitacion Valley for hill-facing homes just over the city line. For the broader picture, see our Brisbane service area coverage and the full CGI sales & service lineup.
Book Your CGI Service in Brisbane Today
If your CGI cabinets are racked, swollen, or failing in a Brisbane hillside or flatland kitchen, call (833) 725-3508. We’ll assess the site conditions, the cabinet construction, and the hardware, then give you a straight answer on repair versus replace. Estimates are free.
Written by Nate Burrell, Owner & General Contractor at Brookside Contractors, serving Brisbane and the 94005 corridor.