Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Mission District, CA | Brookside Contractors
We’re an independent contractor providing CGI sales & service across the Mission District, from full kitchen remodels to single-vanity installs. The difference here comes down to access: most Mission rowhouses have no side setback, so CGI cabinetry and quartz tops almost always go in by hand down a shared alley, not through a front door on a dolly. That geometry changes how we template, protect, and sequence every CGI job. Call (833) 725-3508 for a free estimate.
Why Mission District Residents Choose Us for CGI Service
We’ve spent years fitting CGI ready-to-assemble shaker boxes, Euro-style slab doors, and quartz tops into 25-foot-wide Edwardian and Italianate rowhouses, so we know the brand’s box dimensions, filler options, and finish tolerances against walls that haven’t been square since 1912. We’re not authorized, sponsored, or endorsed by CGI. We buy through normal dealer channels and install through our own licensed crew, which means we answer to you, not to a manufacturer’s service territory. Nate Burrell, our owner and general contractor, trained in construction technology at Gavilan College and spent two decades on job sites before Brookside ever handled our Home Remodeling in Mission District. He runs every CGI install the same way: level the floor first, anchor into real blocking, and never hand-carry a quartz slab without edge protection and a plan for the stairwell turn.
Styles & brands we work with
Common CGI Construction Problems We Solve in Mission District
- Racked frameless boxes on sloped rowhouse floors. A 1920s Edwardian floor can drop half an inch over eight feet toward the rear wall. Set a CGI frameless carcass directly on that slope without a level sub-run and the doors rub, reveals wander, and the whole run looks off by spring. We build a level plywood base before the first box gets anchored.
- Moisture-swollen sink bases and toekicks. Older Mission supply lines and flat-roof leaks leave chronic dampness under kitchen and bath cabinets. Particleboard and MDF-core CGI carcasses swell and delaminate at the base over time. We’ll repair and re-anchor a box that’s only swollen at the toekick; if the core is compromised through the sides, we replace the unit rather than patch it.
- Hinge and glide hardware pulling out of lath and plaster. Pre-1930 Mission rowhouses often have no stud where you expect one. CGI hinge screws bite into old plaster and loosen within months. We cut in new blocking behind the wall and re-anchor so door action stays tight.
- Quartz edge chips from tight-lot hand-carry. Hand-carrying CGI quartz down a shared alley and through a narrow stairwell turn without protection chips edges fast. We template for the actual access path, wrap every slab, and set counters with edge guards until final placement.
- Out-of-square walls defeating stock fillers. Mission row house walls bow and wander. Stock CGI fillers won’t close a 3/4-inch gap at the wall. We scribe quality aftermarket fillers to the actual wall profile so the run ends clean instead of with a caulk line an inch wide.
CGI Service in Mission District: What Local Conditions Mean for Your Equipment
The Mission’s rowhouse stock mostly predates modern codes: dense Italianate and Edwardian wood-frame buildings on raised foundations, 1900 to 1930s, many of them sitting on lots with no side setback. That last detail is the one every Chinatown CGI service client and local owner needs to understand. A CGI cabinet or countertop delivery usually can’t reach the kitchen by truck or dolly. Crews hand-carry boxes down shared alleys and through 25-foot-wide lots, which means templating, box protection, and door-swing clearance have to be planned before the truck ever arrives. On a 1908 Edwardian rowhouse off Valencia Street, our crew tore out a leaking sink base and found the CGI frameless boxes racked a half-inch out of square on a floor that sloped toward the rear wall. We built a level plywood sub-run, re-anchored the carcasses into new blocking where the old lath wouldn’t hold, and reset the quartz top with fresh templating after hand-carrying it down the shared alley. Doors and drawers now line up and the seam sits tight. That’s the job every time here, not the exception.
CGI Models & Products We Service in Mission District
We work on CGI Ready-to-Assemble all-plywood shaker cabinets, Euro-style flat-panel and slab door lines, framed and frameless box systems sold through dealer channels, and CGI quartz and granite countertop programs. For hardware, we spec CGI OEM hinges, glides, and touch-up kits so door alignment and drawer action hold. For fillers, scribes, and leveling systems, we use quality aftermarket parts where the Mission’s out-of-square openings demand it. We keep common OEM hardware and touch-up kits stocked for fast Mission District turnaround, and anything unusual is a short dealer order away.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Mission District
What you’ll pay depends on the line you pick, the size of the run, and what the existing walls and floors need before anything gets anchored. A level sub-run, new blocking, and scribed fillers add labor but they’re what keeps a CGI install straight in an old Mission rowhouse. Here’s what typical jobs run:
| Project | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Every estimate is free and line-itemed, and we walk the actual access path before we quote. Call (833) 725-3508 to schedule yours.
Serving Mission District, CA — Our Local Coverage Area
We’re based in the Mission District area and know this community well as your Mission District General Contractor. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Mission District
Usually yes, but not by truck. Most Mission rowhouses have no side setback, so CGI boxes and quartz slabs get hand-carried down shared alleys and through narrow stairwells. We plan templating, door-swing clearance, and edge protection around that access path before the truck arrives. Call (833) 725-3508 and we’ll walk your alley with you.
They will if the floor gets leveled first. A frameless CGI box racked onto a sloped Edwardian floor will rub doors and wander reveals within a season. We build a level plywood sub-run before the first carcass is anchored. That’s standard practice on every Mission install we do, not an upcharge.
Yes, most Mission District kitchen remodels need a permit, especially when plumbing or electrical moves. We handle permit sequencing so CGI cabinets arrive after rough-in passes, not before. The lead time on the boxes themselves is usually the least of it; the city’s review clock in the Mission is the variable.
Chronic moisture from old supply lines and flat-roof leaks. The Mission’s rowhouses are full of both. When a CGI particleboard or MDF carcass sits in that dampness, the toekick and sink base swell and delaminate. We repair and re-anchor when only the base is compromised; if the core is swollen through the sides, we replace the unit.
We template for the actual hand-carry path, wrap every slab, and use edge guards until final set. The Mission’s narrow alleys and tight stairwell turns are where quartz gets chipped, not in the truck. Call (833) 725-3508 for an exact quote on your CGI top; estimates are free.
Service Areas Near Mission District
Brookside Contractors installs CGI cabinetry and countertops throughout the Mission District and into Mission District service area neighbors, including CGI service in Noe Valley, Bernal Heights, Potrero Hill, and the Castro. We also bring the same hand-carry planning to jobs across CGI service in San Francisco, from the Richmond to the Bayview, wherever tight lots and old framing make stock installs fail.
Book Your CGI Service in Mission District Today
If you’re planning a CGI kitchen, vanity, or countertop in CGI in Visitacion Valley or the Mission District, the first step is a free site walk. We’ll check the access path, the floor, the walls, and the permit situation before you spend a dollar. Call (833) 725-3508 to schedule your free estimate. Do it once, do it right – everything else is just a future repair bill.
Written by Nate Burrell, Owner & General Contractor at Brookside Contractors, serving Mission District and greater San Francisco.