Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Portola Valley, CA | Brookside Contractors
We’re an independent our General Contractor in Portola Valley handling cabinet installation, refacing, and full kitchen and bath remodels across Portola Valley (94028). The detail that shapes CWS work here more than anything: wildfire-defensibility overlay rules mean any cabinet run against an exterior wall often has to be re-flashed and sealed before new boxes go in. If your CWS cabinets are binding, sagging, or showing finish failure, call (833) 725-3508 for a free estimate.
Why Portola Valley Residents Choose Us for CWS Service
CWS cabinetry shows up in a lot of Portola Valley homes – the Bridgeport shaker line, York and Charleston-style painted vanities, the classic raised-panel oak boxes that were standard in mid-century ranchers. We know how these products were built, how they fail here, and what’s worth fixing versus replacing. Nate Burrell, our owner and general contractor, trained in construction technology at Gavilan College and has spent nearly two decades on job sites throughout South Santa Clara County, including Stanford CWS service work. That background matters when a cabinet issue is actually a wall-envelope issue, which is more common in Portola Valley than most people expect.
We’re not authorized by CWS. We’re a local contractor who installs and services these products to the same standards the brand’s installation manuals require. The difference is we’re on your lane, in your kitchen, looking at how the whole assembly is performing – not just the drawer slide.
Styles & brands we work with
Common CWS Construction Problems We Solve in Portola Valley
- Drawer glides and hinges seizing or sagging after years of temperature swings. Portola Valley’s hot, dry summers followed by fog-cycle moisture push wood and metal hardware through a lot of expansion and contraction. We re-hang, adjust, or replace slides rather than tearing out boxes that are still sound.
- Painted CWS doors checking and peeling on south-facing walls. Dry summer heat and morning fog put a film finish through cycles that eventually fail. We see it constantly in mid-century ranchers with original finishes on sun-exposed cabinet runs.
- Cabinet boxes swollen and binding against exterior walls. Older Portola Valley homes weren’t built with today’s ignition-resistant envelope standards. Moisture works into the wall, the box takes it on, and doors start to rack. We correct the envelope and reinstall – shims alone won’t fix the root cause.
- Wood bath vanities delaminating at the toe kick. A vanity sitting low on a slab with poor drainage wicks moisture through the face frame. We reset the cabinet on a moisture barrier or replace it with a raised, sealed base.
- Finish hardware failure from years of daily use. Soft-close slides wear out, hinges lose tension, and drawer boxes rack. Where the CWS line is still supported, we source genuine replacement doors, drawer boxes, and hardware. Where it’s discontinued, we match dimensions with quality aftermarket slides and hinges.
CWS Service in Portola Valley: What Local Conditions Mean for Your Equipment
Portola Valley’s wildfire-defensibility overlay requirements don’t stop at siding and ember-resistant vents. When a kitchen or bath remodel exposes old CWS cabinet runs against exterior walls, those assemblies often have to be re-flashed and sealed to the home’s ignition-resistant standard before new boxes go in. That’s a code-driven step that doesn’t come up in most neighboring towns, and it changes the scope of what looks like a simple cabinet swap. On top of that, many Portola Valley lanes are narrow private roads with heritage-oak protection plans. A standard delivery truck usually can’t reach the site without a shuttle or pre-arranged access, so we schedule cabinet deliveries and material shuttles around tree-protection review. If you’ve ever wondered why a simple kitchen job in Portola Valley seems to take more coordination than the same job in CWS in Los Altos Hills, that’s why.
CWS Models & Products We Service in Portola Valley
We install and service the CWS Bridgeport shaker-style kitchen line, York and Charleston-style painted bath vanities, the raised-panel oak cabinet line, and semi-custom drawer and door fronts with soft-close hardware. When a line is still supported, we source genuine CWS replacement doors, drawer boxes, and hardware. When the original part is discontinued, we use aftermarket soft-close slides and hinges matched to the box dimensions so the cabinet stays usable. We tell owners honestly when refacing or a few new doors will outlast a full tear-out, and when a warped, water-damaged box is genuinely past saving. You can explore our broader CWS sales & service capabilities across the peninsula.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Portola Valley
Project costs in Portola Valley usually land in these ranges:
| Service | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
What drives the final number is the condition of the wall behind the cabinets, whether a heritage-oak plan restricts access and scheduling, and whether you’re refacing or installing new boxes. A free estimate gives you a written line-item quote with no change orders. Call (833) 725-3508 to schedule one.
Serving Portola Valley, CA — Our Local Coverage Area
We’re based in the Portola Valley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Portola Valley
Yes – and we handle the overlay requirements as part of the job. When cabinets sit against exterior walls, we re-flash and seal the assembly to meet the home’s ignition-resistant envelope before new boxes go in. That step is built into our scope, not added after the fact.
If the boxes are sound, repair and refacing usually cost less than half of a full replacement. We re-hang or replace slides, re-finish or replace doors, and only tear out boxes when water damage has genuinely compromised the structure. Call (833) 725-3508 for an exact quote – estimates are free.
Deliveries have to be scheduled around tree-protection review, and a full-size truck often can’t reach the site. We shuttle materials up the lane in smaller loads and coordinate access with your property’s oak plan. It adds a little coordination, but it keeps the job moving without damaging protected trees.
When the original line is still supported, we source genuine Ladera CWS service replacement doors and drawer boxes. When it’s discontinued, we match dimensions and finish with quality aftermarket pieces. Sometimes a close match on a few doors beats refacing the whole kitchen – we’ll tell you which route makes sense. Call (833) 725-3508 and we’ll take a look.
Yes. We coordinate cabinet installation and countertop templating and install so you’re not left with a half-finished kitchen for weeks. Our single-contractor approach means one schedule, one point of contact, and no finger-pointing between trades.
Service Areas Near Portola Valley
We serve Portola Valley and the surrounding communities, including Portola Valley service area neighbors like Woodside and West Menlo Park. Our crews also work in Morgan Hill, San Martin, Gilroy, and the rural pockets around Corralitos and Day Valley. If you’re just over the ridge, see our CWS service in West Menlo Park page or the CWS service in Woodside page for details on those areas.
Book Your CWS Service in Portola Valley Today
If your CWS cabinets are binding, sagging, or peeling, don’t wait for the problem to spread to the wall behind them. Call (833) 725-3508 to schedule your free estimate. We’ll assess the cabinets, the envelope, and the access plan – and give you an honest answer on repair versus replacement.
Written by Nate Burrell, Owner at Brookside Contractors, serving Portola Valley. Do it once, do it right – everything else is just a future repair bill.