Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Belmont, CA | Brookside Contractors
We provide independent CWS cabinetry installation, refacing, and full kitchen remodeling throughout Belmont. The difference here is that we sequence seismic retrofit work into the first phase before any CWS cabinet or countertop goes in, because so many Belmont hillside homes need foundation work before plan check will pass anything. That sequencing isn’t standard practice for most cabinet contractors, and it’s the reason our Belmont projects come out level and stay level. Call (833) 725-3508 to talk through your project.
Why Belmont Residents Choose Us for CWS Service
We’ve worked with CWS cabinetry lines for years, across Belmont ranch kitchens, split-level remodels, and hillside additions, much like our San Carlos CWS service territory. That means we know how CWS Concord wood doors wear over decades of daily use, how Wakefield raised-panel frames behave when a house shifts, and whether a Brookhaven painted MDF box is worth refacing or needs to come out entirely. Nate Burrell, our owner, grew up around framing crews in South Santa Clara County and trained in construction technology before spending twenty years on job sites, so when we tell a Belmont homeowner their CWS boxes are structurally sound and only need new hardware, it’s not a guess. It’s what we’ve seen in a hundred kitchens just like theirs.
We’re also an CWS sales & service provider who stocks fast-turnaround replacement hinges, glides, and drawer boxes locally, so we’re not waiting on a warehouse across the country when your soft-close mechanism gives out before Thanksgiving. Belmont homeowners get the same accountability on cabinet work that we bring to roofing, siding, and ADU construction. One contractor, one point of contact, one plan from framing to finished surfaces.
Styles & brands we work with
Common CWS Construction Problems We Solve in Belmont
- Hinge and drawer-glide fatigue on original CWS wood-door cabinets. Belmont’s mid-century ranches from the 1950s and 60s are full of original CWS boxes that have opened and shut forty thousand times. The soft-close mechanisms wear out long before the face frames do. We replace the hardware, not the cabinet, and you save real money.
- Door sag and frame racking from winter humidity swings. Houses off Ralston Avenue and through the hills catch heavy moisture from the rainy season. CWS painted MDF doors absorb that moisture at the edges and blister near the sink or range when ventilation is weak. We fix the door, then we fix the airflow problem that caused it.
- Water damage at toe kicks and sink bases in narrow galley kitchens. Belmont’s split-level floor plans often have tight U-shaped kitchens where slow leaks behind full-height CWS runs go unnoticed for years. By the time a homeowner sees the swell, the sink base carcass is usually compromised. We catch this early in nearly every Belmont remodel we open up.
- Out-of-square wall gaps when stock CWS cabinets go into settled split-levels. The original framing in many Belmont hillside homes has moved over sixty-plus years. Sloppy scribe work shows up as uneven reveals and doors that stick after six months. We shim, scribe, and level before we ever set a cabinet.
- Original post-and-pier foundation problems that telegraph straight into the cabinets. When the floor isn’t level, no cabinet installation will be either. In Belmont, the foundation issue has to get solved first, or you’re paying twice. This is the one we see most often on hillside streets off Ralston Avenue.
CWS Service in Belmont: What Local Conditions Mean for Your Equipment
Belmont sits directly in the path of the San Andreas Fault and up against the Belmont Hills, so nearly every construction project here touches seismic retrofitting, hillside foundation engineering, or both. That’s not true in our San Mateo CWS service area or in Redwood City, and it changes how we approach every CWS kitchen installation in this zip code. On hillside streets off Ralston Avenue, original 1950s post-and-pier foundations routinely need bolting and cripple-wall bracing before plan check will clear so much as a cabinet tear-out, let alone a wall removal. We sequence that retrofit into phase one, before any CWS cabinet or countertop work begins. That means when your Brookhaven painted cabinets go in, they’re sitting on a floor that’s been squared and tied to the foundation, not floating over a sixty-year-old pier block that’s been drifting since Eisenhower was president. The cabinets are only as level as the foundation they sit on, and in Belmont, the foundation is the first question we answer.
On a recent hillside remodel off Ralston Avenue, our crew opened up a 1960s split-level kitchen and found the original pier-and-post foundation needed bolting and cripple-wall bracing before plan check would clear the addition. So we scoped the retrofit first, then installed CWS Brookhaven painted cabinetry with new soft-close glides and a quartz top once the framing was squared. The homeowners got a kitchen that finally sits level on a slope that’s been shifting under it for sixty years.
CWS Models & Products We Service in Belmont
We install, reface, and repair the full CWS range we see in Belmont kitchens: the Concord wood-door line, the Wakefield raised-panel series, Brookhaven painted MDF cabinetry, and the Value Series ready-to-assemble boxes that went into a lot of 1980s Belmont additions. For structural matches on doors and drawer boxes, we source genuine CWS replacements. For hardware, we often specify quality aftermarket soft-close hinges and glides that outperform the originals at a lower cost. If the boxes are solid, refacing and re-hinging saves thousands. If water or racking has compromised the carcasses, we’ll tell you replacement is the smarter spend. No one benefits when we pretty up a cabinet that’s already failed.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Belmont
What you’ll pay depends on what we find when we open the walls and check the foundation, but these are the ranges we quote for CWS work in Belmont right now:
| Service | Belmont Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Small Kitchen Remodel | $9,000 – $20,000 |
Seismic retrofit scope, cabinet refacing versus full replacement, and countertop material all move the number. Our free estimates include a written line-item breakdown, and we walk you through exactly which CWS pieces are worth keeping and which ones are costing you more than a replacement would. Call (833) 725-3508 and we’ll set up a time to look at your kitchen in person.
Serving Belmont, CA — Our Local Coverage Area
We’re our General Contractor in Belmont and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Belmont
Often, yes. If your home is on an original post-and-pier foundation in the hills – and many 1950s and 60s Belmont homes are – plan check will commonly require bolting and cripple-wall bracing before any structural work or addition can proceed. We scope that retrofit into phase one so your CWS cabinets go onto a level, code-compliant floor. Call (833) 725-3508 and we’ll tell you what your specific house likely needs before we quote anything.
If the boxes are square and dry, refacing is the smart money. We source genuine CWS replacement doors and drawer fronts for structural matches, then rebuild the run with new soft-close hardware. You keep the original footprint and spend a fraction of what a full tear-out costs. If the carcasses have water damage or racking, we’ll tell you straight that refacing is throwing good money after bad.
Belmont’s rainy season saturates hillside air and the moisture finds its way into painted MDF cabinet edges. Doors swell at the boundary, especially near sinks and ranges where humidity spikes. If your kitchen lacks proper ventilation, the problem compounds every winter. We fix the door and then address the ventilation so it doesn’t come back season after season.
Most Belmont CWS kitchen remodels fall between $14,000 and $45,000 depending on cabinet line, countertop material, and whether seismic retrofit work is required first. A smaller kitchen with refacing and new countertops can land lower, around $9,000 to $20,000. For an exact number on your kitchen, call (833) 725-3508 – estimates are free and we’ll give you the real breakdown before you commit to anything.
You can, but only if the installer is willing to shim, scribe, and level every run before the boxes go up. Belmont’s split-levels from the 60s have almost always moved at least a little. We square the walls and floor first, then set the cabinets. If the framing’s moved enough to affect the floor plane, we’ll tell you why a retrofit before cabinet installation is the only way to keep your doors from sticking in six months.
Service Areas Near Belmont
We work throughout the mid-Peninsula and South Bay, including Belmont service area coverage, CWS service in Foster City, and CWS service in Highlands-Baywood Park. We also take on projects in San Mateo, Redwood City, and San Carlos. If you’re just outside Belmont, call us – we’ll let you know straight if we can get a crew to your street.
Book Your CWS Service in Belmont Today
If you’re in Belmont and your CWS cabinets need refacing, re-hinging, or a full remodel, call (833) 725-3508 for a free estimate. We’ll walk your kitchen, check the foundation if it’s a hillside home, and tell you exactly what this job needs. Do it once, do it right, everything else is just a future repair bill.
Written by Nate Burrell, Owner at Brookside Contractors, serving Belmont and the wider South Bay for years.