Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Mountain View, CA | Brookside Contractors
We provide independent Home Remodeling in Mountain View with Mr-Glass installation, repair, and replacement across the city, from the Eichler tracts near Monta Loma to the ranch subdivisions off Grant Road. What makes our Mr-Glass work different here is simple: we’ve spent years fitting frameless shower enclosures and sliding patio doors into mid-century walls that were never square to begin with, and we know how radiant slab heating changes every bath remodel in this city. Call (833) 725-3508 for a free estimate.
Brookside Contractors is an independent contractor, not affiliated with or authorized by Mr-Glass. We buy the same product lines any homeowner can, then bring the field experience to make them fit walls that have moved, settled, and drifted over six decades of Mountain View winters. Whether you’re converting a 1950s tub alcove in a Blossom Valley rancher or refreshing a frameless shower door in a Waverly Park remodel, we handle the whole job under one roof. See our Mr-Glass sales & service page for the full scope of what we cover.
Why Mountain View Residents Choose Us for Mr-Glass Service
Nate Burrell, our owner and General Contractor in Mountain View, grew up in the Paradise Valley area of Morgan Hill, where he watched half the neighborhoods get framed up as a kid. He trained in construction technology at Gavilan College in Gilroy, then spent the better part of two decades on job sites throughout South Santa Clara County before bringing that experience to Mountain View. That background matters when you’re hanging a semi-frameless Mr-Glass enclosure on an Eichler bath wall that hasn’t been plumb since the radiant slab was poured.
We keep genuine Mr-Glass replacement parts in stock for the failures we see most in Mountain View: worn rollers, seized hinges, shrunk seals, and corroded track hardware. When OEM stock has dried up, we match to quality aftermarket equivalents and tell you which one you’re getting. No guesswork. No surprises on the invoice. Just glass and hardware that fits the opening you actually have, not the opening the manufacturer assumed. For a broader look at how we work across the city, visit our Mountain View service area page.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Mountain View
- Roller and track wear on frameless sliding shower doors. Mountain View’s mild-damp winters leave condensation sitting in the bottom track for months. Mineral spotting accelerates once the factory finish breaks down, and the rollers grind against pitted aluminum until the door sticks or jumps the track. We replace rollers, realign the track, and restore smooth travel without replacing the glass.
- Hinge and pivot failures on semi-frameless enclosures. Eichler bath walls from the 1950s were never plumb, and they’ve shifted further since the radiant slab was poured. A hinge that’s carrying door weight against an out-of-square wall binds, then fails at the pivot. We laser-check the opening, reset the hinge pack, and often switch to adjustable hinges so the door swings clean instead of fighting the wall.
- Seal and gasket shrinkage on sliding patio doors. Winter atmospheric-river storms drive rain against the track with real force. By the time a seal shrinks, water gets past the gasket and shows up as sill rot, not glass failure. We pull the door, replace the weatherstripping and track gaskets, and reseal the sill before the rot spreads into the framing.
- Tempered panel edge chipping from rough handling during remodels. A cosmetic chip on a tempered Mr-Glass panel isn’t repairable. Tempered glass can’t be cut down, so a chipped edge means a full panel replacement. We see this constantly on Mountain View remodels where a demo crew bumped a panel during tub-to-shower work. We handle the glass carefully from day one and tell you honestly when replacement is the only correct call.
- Water intrusion behind the curb on tub-to-shower conversions. When an original Mr-Glass enclosure gets pulled from a Mountain View ranch home, the waterproofing behind the old curb is often failing. We rebuild the curb with proper slope, set a new vinyl liner or surface membrane, and hang the new enclosure on walls that drain the way they should. Do it once, do it right – everything else is just a future repair bill.
Mr-Glass Service in Mountain View: What Local Conditions Mean for Your Equipment
Mountain View’s Eichler subdivisions, especially the original Joe Eichler tracts from the 1950s, were built with radiant slab heating pipes embedded in the concrete floor. Those pipes crack and leak with age, and they sit right under the area where most Mr-Glass shower enclosures and tub-to-shower conversions happen. Before demolition on any bath remodel that involves floor work, we pressure-test those embedded loops. Crack a heating line under a new shower curb during demo, and you’re not re-tiling – you’re repouring slab. That’s a five-figure surprise no homeowner wants, and it’s the single biggest reason Mountain View Mr-Glass work needs a contractor who actually knows this city’s housing stock, not just glass installation. On an Eichler near the Monta Loma tract, our crew opened up a cramped 1950s tub alcove for a walk-in shower and found the original Mr-Glass repair in Loyola style semi-frameless enclosure hinged to a wall that had drifted almost half an inch out of plumb. We pressure-tested the radiant slab lines before demo, then laser-checked the opening and set a custom-cut frameless Mr-Glass unit with adjustable hinges so the door swings clean instead of binding on the curb. That’s the difference between glass work and construction work.
Mr-Glass Models & Products We Service in Mountain View
We install and service the full Mr-Glass in Sunnyvale and Mountain View product line that’s relevant to local homes: frameless sliding shower door systems in both barn-style and single-panel configurations, semi-frameless hinged shower enclosures, custom-cut tempered glass panels and fixed sidelights, and aluminum-framed sliding and swinging patio doors. We stock genuine Mr-Glass replacement rollers, hinges, seals, and handles for fast turnaround on repairs. When a specific OEM part is no longer manufactured, we match to a quality aftermarket equivalent and tell you up front which one you’re getting. You get an honest repair-or-replace recommendation based on the actual condition of the glass and frame, not on what’s easiest to bill. On new installations, we recommend the Mr-Glass enclosure that fits the wall you actually have – frameless for square openings, semi-frameless with adjustable hinges for anything mid-century that’s drifted.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Mountain View
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
What drives cost on Mountain View Mr-Glass work is the condition of the opening and the substrate behind it. A square opening in a newer townhome off North Bayshore is straightforward glass work. A drifted Eichler bath wall with radiant slab questions and failing waterproofing is a construction project with glass at the end of it. Your free estimate includes an on-site inspection, laser-checked opening measurements, a written line-item quote, and a straight recommendation on repair versus replacement. Call (833) 725-3508 to schedule yours.
Serving Mountain View, CA — Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Mountain View
Yes, we can replace just the glass panel if the frame, hinges, and track are still sound. If the frame is corroded or the rollers are shot, a hardware and seal refresh often costs less than a full enclosure. Once the panel is chipped or the frame is corroded through, replacement is the honest call. Call (833) 725-3508 and we’ll inspect yours and tell you straight.
Yes, it matters more than anything else in the project. Those embedded heating pipes run right under your tub area, and cracking one during demolition means repouring concrete, not just re-tiling. We pressure-test the lines before any floor work starts. Call (833) 725-3508 to schedule a tub-to-shower conversion that accounts for your slab first.
They do, and it’s not the glass that fails first. Atmospheric-river storms drive rain against the track with enough force to slip past shrunk seals, and the water shows up as sill rot. We replace gaskets and reseal sills before the framing gets damaged. Call (833) 725-3508 if you’ve noticed water at the base of a sliding door after a storm.
We laser-check every opening before ordering or cutting any glass. For walls that have drifted half an inch or more from plumb, we use semi-frameless enclosures with adjustable hinges, or we fur out and shim the wall to bring it back to square before installation. The fix depends on how far it’s moved and what’s behind the surface. Call (833) 725-3508 and we’ll measure yours properly.
No, we’re an independent contractor, not affiliated with or authorized by Mr-Glass. We buy the same product lines any homeowner can and bring the field experience to make them fit Mountain View walls that have moved. Your Mr-Glass product warranty stays with the manufacturer. Our workmanship carries its own warranty from Brookside Contractors. Call (833) 725-3508 and we’ll explain exactly what’s covered.
Service Areas Near Mountain View
Beyond Mountain View’s 94039, 94040, 94041, and 94042 ZIP codes, we take Mr-Glass calls across South Santa Clara County and into the foothills. You’ll find us working in Mr-Glass service in Los Altos, where mid-century ranches have their own share of settled openings. We also serve Mr-Glass service in Los Altos Hills, where larger custom homes demand careful glass handling and precise enclosure work. If you’re in Morgan Hill, San Martin, or Gilroy, the same crew shows up with the same parts stock and the same approach: measure first, then fit.
Book Your Mr-Glass Service in Mountain View Today
If your Mr-Glass shower door is dragging, your patio door is leaking, or you’re planning a remodel that involves glass, call us. We’ll inspect the opening, check the slab if it’s an Eichler, and give you a written quote that covers the actual job. Reach Nate Burrell and the Brookside Contractors team at (833) 725-3508 for your free estimate.
Written by Nate Burrell, Owner at Brookside Contractors, serving Mountain View and South Santa Clara County.