Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Los Altos Hills, CA | Brookside Contractors
We’re Brookside Contractors, and we handle independent Mr-Glass service across Los Altos Hills – frameless shower enclosures, sliding glass door systems, fixed glass panels, and custom-cut glass for architect-designed homes. The thing that separates our Mr-Glass work here from anywhere else: nearly every job lands inside a custom hillside home where the foundation has shifted, the openings are rarely square, and the glass has to be re-templated off the actual structure, not the original drawings. Call (833) 725-3508 for a free estimate. We’ll tell you straight whether the glass needs repair or replacement.
Why Los Altos Hills Residents Choose Us for Mr-Glass Service
We’ve been retrofitting Mr-Glass into Los Altos Hills homes long enough to know what these houses do to glass. The town’s one-acre minimum lots and 5,000 square foot footprint cap mean almost every structure is a custom build from the 1960s through the 1980s, often with expansive glass walls and multi-level foundations that follow steep terrain. Those foundations move. Floor plates settle. Tile curbs drop a degree or two over decades of wet winters. Standard glass hardware doesn’t forgive that. We do.
Nate Burrell, our owner and general contractor, grew up around job sites in South Santa Clara County and trained in construction technology at Gavilan College in Gilroy. He’s spent the better part of two decades on structural work and finish remodels, and he’ll tell you the same thing on the phone he tells clients at the walkthrough: Mr-Glass repair in Los Altos starts with the opening, because glass is only as good as the opening it sits in. That’s why we laser-check every Mr-Glass opening in Los Altos Hills before we order a single panel. Do it once, do it right – everything else is just a future repair bill.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Los Altos Hills
Mr-Glass systems are well-built, but Los Altos Hills conditions punish them in specific, predictable ways. Here’s what we see most often:
- Frameless shower panels cracking at hinge and fastener points. Older hillside homes settle. The tile curb or wall framing shifts, and the rigid 3/8-inch tempered panel absorbs stress it was never designed to take. The crack starts at the hinge, not the glass edge. We see this on 1980s master baths throughout the 94022 hills.
- Sliding Mr-Glass doors dropping out of track alignment. Top-rail and guide-wheel wear is normal after years of use, but on a home where the floor has settled unevenly, the door doesn’t just scrape – it binds. That scrape on the curb or tile is the door telling you the track is no longer level.
- Seal and gasket failure on fixed glass partitions and window units. Los Altos Hills sits in the rain shadow of the Santa Cruz Mountains, but winter storms still dump intense rainfall on exposed west-facing walls. When gaskets fail, water migrates behind the glass and lifts the surrounding finish. By the time you see the stain, the seal’s been gone for a while.
- Tempered panels templated to a rough opening that later shifted during a remodel. This is the one we see after another contractor does the framing. Glass gets ordered off the original dimensions, the foundation moves or the rough opening gets rebuilt, and the panel binds, gaps unevenly, or stress-fractures along the edge months after install.
- Custom-cut Mr-Glass for arched and angled openings. Los Altos Hills homes love architectural glass – arched windows, angled door transoms, fixed panels that follow a roofline. Getting those templates right requires measuring the actual opening three times: once at bid, once after framing settles, once before the glass is cut.
Mr-Glass Service in Los Altos Hills: What Local Conditions Mean for Your Equipment
Here’s what most glass pages won’t tell you about Los Altos Hills: the town mandates one-acre minimum lots and enforces a strict 5,000 square foot maximum footprint, which means glass here is almost never pulled off a stock size. Every Mr-Glass job lands inside a custom hillside home where the glass was specified off architectural drawings and then re-templated after the framing and foundation were actually built. Add the Heritage Tree Ordinance to the sequence – any native oak or redwood within 50 feet of a construction footprint requires arborist reports and protective canopies, which routinely adds months to project timelines – and you get a reality where Mr-Glass work has to be sequenced carefully. Glass ordered too early doesn’t fit. Glass ordered too late holds up the final inspection. We’ve learned to re-measure after the structural work settles and the tree reviews clear, not before. That’s the difference between a panel that drops in clean and one that gets forced into an opening that was never square to begin with.
On a hillside remodel off a tree-canopied lane in the 94022 hills, our crew found the master bath’s original 1980s Mr-Glass frameless enclosure had cracked at both hinge fasteners because the pier-and-post floor had settled over decades of wet winters. We laser-checked the opening, found the curb two degrees out of level, rebuilt the curb and re-templated the panels, then set new 3/8-inch tempered Mr-Glass hinged panels with adjustable hinges to take up the residual wall movement. The enclosure has been stable through two storm seasons since.
Mr-Glass Models & Products We Service in Los Altos Hills
We work on the full Mr-Glass line, sourcing glass and hardware from the same suppliers and matching OEM profiles by hand rather than relying on any manufacturer relationship. That means frameless hinged shower enclosures in 3/8-inch and 1/2-inch tempered glass, sliding shower door systems with top-rail guides, fixed glass wall panels and clear or obscure tempered partitions, and custom-cut glass for arched and angled openings. Our Mr-Glass sales & service experience covers all of it.
On parts, we specify OEM or OEM-equivalent hinges, guide wheels, and gaskets where the original profile is still available. When an OEM part is discontinued or has a known failure history, we switch to quality aftermarket hardware – and we always tell you which we’re using and why. No silent substitutions. Our repair-versus-replace stance is simple: if the glass is intact and only hardware or seals have failed, we repair. If a panel is chipped at the edge, cracked at a hinge, or the opening itself is out of square, replacement is the honest answer.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Los Altos Hills
Mr-Glass work in Los Altos Hills prices differently than flatland glass jobs. Hillside access, out-of-square openings, heritage-tree-driven schedule shifts, and the fact that most glass here is custom-templated all factor into the number. Here’s what we quote, based on the actual scope we see on 94022 homes:
| Mr-Glass Service | Typical Range in Los Altos Hills |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
A free estimate means we come out, measure the actual opening, check the level, and give you a written line-item quote before any glass gets ordered. Call (833) 725-3508 and we’ll schedule it.
Serving Los Altos Hills, CA — Our Local Coverage Area
We’re based in the Los Altos Hills area and also provide Mountain View Mr-Glass service, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Los Altos Hills
Yes, shower enclosure work within an existing bathroom footprint typically falls under plumbing fixture replacement scope, which Los Altos Hills processes without triggering the one-acre or 5,000 square foot review layers. If you’re expanding the bathroom footprint or moving walls, that’s a different permit path and the geological and drainage reviews kick in. We’ll tell you which applies to your project before any work starts. Call (833) 725-3508 to talk through your specific scope.
They can, if your project touches any native oak or redwood within 50 feet of the construction footprint. The Heritage Tree Ordinance requires arborist reports and protective canopies before permits are issued, and that review adds weeks to months. For Mr-Glass repair in Loyola or a window replacement on an existing opening, the tree rules usually don’t trigger anything. For an addition or remodel where glass is part of the broader scope, they absolutely affect sequencing. Glass gets ordered after the tree review clears and the framing settles, never before.
If the tempered panel is cracked at the hinge fastener points, replacement is the honest answer. Cracks at the hinge mean the glass has been absorbing structural movement for years, and repairing it isn’t safe – tempered glass with a stress crack can fail suddenly. We’ll pull the panel, laser-check the curb and wall framing, correct what caused the crack, and re-templated new Mr-Glass glass to the actual opening. For an exact quote on your enclosure, call (833) 725-3508 – estimates are free.
Because foundations on steep terrain move. Post-and-pier floors settle at different rates depending on soil moisture, and clay-rich hillsides expand and contract through wet and dry seasons. The opening that measured square on the architect’s drawing in 1978 isn’t square today. We don’t order Mr-Glass panels off drawings – we re-templated off the actual opening using laser measurements, then specify adjustable hinges and gaskets that absorb residual movement. Standard fixed hardware in an out-of-square opening is how panels crack at the hinge months after install.
Yes, and it’s one of the biggest factors in how long exterior installations last. Los Altos Hills gets intense winter rainfall onto steep, clay-rich hillsides, so drainage has to be handled before glass goes in. We check the slope, the gutter paths, and the existing drainage before we set exterior Mr-Glass windows or doors. If water’s been pooling at the sill, new glass won’t fix the real problem. Call (833) 725-3508 for a site visit – we’ll look at the drainage as part of the free estimate.
Service Areas Near Los Altos Hills
We run Mr-Glass service from our Los Altos Hills service area out to the surrounding communities. Our crews regularly work in Morgan Hill, San Martin, and Gilroy, and we take Mr-Glass calls in Corralitos, Interlaken, and Day Valley when the job warrants the drive. If you’re in a neighboring town and need Mr-Glass service in Palo Alto or Mr-Glass service in Stanford, we cover those routes too. One call gets you a straight answer on whether we can help and what it’ll take.
Book Your Mr-Glass Service in Los Altos Hills Today
We’re taking Mr-Glass calls in Los Altos Hills this week. If you’ve got a cracked panel, a slider that’s dropped out of track, or an opening that’s never measured square, call (833) 725-3508 for a free estimate. Nate and the crew will come out, measure what’s actually there, and give you a written line-item quote before any glass gets ordered.
Written by Nate Burrell, Owner at Brookside Contractors, serving Los Altos Hills and the South Bay.