T

Therma-Tru Construction in San Bruno, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Therma-Tru Construction in San Bruno, CA | Brookside Contractors

We provide independent Therma-Tru door installation, repair, and replacement across San Bruno, CA, with service built around how these doors actually hold up in Peninsula fog and wind-driven rain. The one thing that sets our Therma-Tru work apart here: we know the failure points that show up on The Flats and hillside lots, and we fix them with the right parts the first time. Call (833) 725-3508 for a free estimate on any Therma-Tru entry, patio, or sidelite project in San Bruno.

Contractor marking a wooden beam with a speed square and pencil in San Bruno, CA

Call (833) 725-3508

Why San Bruno Residents Choose Us for Therma-Tru Service

We work on Therma-Tru doors every week in San Bruno, from Fiber-Classic entry slabs on The Flats to Smooth-Star patio units on hillside decks, so we know how their fiberglass skins, rot-resistant frames, and hinge hardware hold up in Peninsula damp. As a San Bruno General Contractor, we sell, fit, and service Therma-Tru product on its merits. We are not authorized, sponsored, or backed by Therma-Tru, and we tell you that plainly because it matters: our recommendations come from what works on San Bruno homes, not from a manufacturer’s sales incentive.

Our Therma-Tru familiarity runs deep enough that Nate Burrell, our owner and general contractor, can usually diagnose a door’s problem from a photo and a description of which way it faces. He trained in construction technology at Gavilan College and spent the better part of two decades on job sites in South Santa Clara County before bringing that experience to Therma-Tru sales & service on the Peninsula. Do it once, do it right, everything else is just a future repair bill. That’s how we approach every door we touch in San Bruno.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common Therma-Tru Construction Problems We Solve in San Bruno

  • Bottom rail swelling and delamination on west-facing doors. Fiber-Classic entry doors on the fog-cooled west side of San Bruno take Pacific moisture head-on. When top and side weatherstripping or the sill pan fails, water gets behind the fiberglass skin and the bottom rail starts to swell and peel. We replace the sill, reseal the opening, and reset the door so it drains properly.
  • Corroded aluminum sills on older ranch homes. The post-war 1940s and 1950s houses near San Mateo Avenue and across The Flats often still have their original aluminum or vinyl door sills. Years of damp marine air pit the metal, and the door starts dragging or leaking at the threshold even when the slab itself is sound. A new OEM Therma-Tru sill fixes the seal and the sweep.
  • Sagging hinges and loose multi-point hardware on hillside doors. Homes on the slopes up toward Sweeney Ridge sit on soil that moves with winter rain. Deck settlement and slope creep rack the door frame, and the original Therma-Tru hinges and locking hardware loosen over time. Tightening only masks the problem; we square the frame and reset the hardware so the door seals properly again.
  • Clouded insulated glass on Coastal-facing doors and sidelites. Door glass seals and sidelite putty on aged Therma-Tru units fail, letting fog-season moisture wick into the insulated glass. Doors facing the coast side of town show this sooner than others. We replace the glass with Therma-Tru-compatible units and reseal the opening.
  • Rotting patio door frames in splash zones. Smooth-Star patio doors on tight San Bruno lots often sit a few feet from a neighbor’s wall or fence. Rain splash and shade trap moisture around the threshold, and the rough opening can rot even though the fiberglass slab itself is fine. We repair the framing, install proper sill flashing, and reset the door.

Therma-Tru Service in San Bruno: What Local Conditions Mean for Your Equipment

San Bruno’s built-out infill lots on The Flats leave doors facing tight side yards and neighboring walls a few feet away, so Therma-Tru entry and patio doors here often sit in shade and splash zones where weatherstripping and sill draining matter more than sun exposure would. That’s a San Bruno-specific condition you won’t hear about from a company offering Therma-Tru service in Millbrae. A door on a wide Peninsula lot might never see standing water at the threshold; a door wedged between two ranch homes in the 94066 zip code deals with rain splash off the neighbor’s wall, a narrow side path that funnels water toward the foundation, and fog that keeps the bottom rail damp for months. The fix isn’t a different door. It’s a sill pan with proper back-slope, OEM weatherstripping sized for the actual gap, and an installer who checks the drainage path before setting the slab. We see this pattern constantly on the flat grid west of El Camino Real, and we build for it.

On a ranch home in the Crestmoor neighborhood, our crew found a west-facing Fiber-Classic entry door whose bottom rail had swelled and delaminated from years of fog-season splash and a corroded OEM sill. We pulled the door, repaired the rough opening, installed a new sill pan with proper back-slope, set a fresh Therma-Tru slab with OEM weatherstripping and hinges, and resealed the sidelite. That door has stayed dry through the winter storms since.

Therma-Tru Models & Products We Service in San Bruno

We install and service the full Therma-Tru residential lineup that makes sense for San Bruno homes, unlike Therma-Tru repair in Pacifica that faces different coastal conditions. Fiber-Classic and Fiber-Classic Oak entry doors are the most common on ranch and hillside houses here; Smooth-Star exterior and patio doors show up on decks and walkout conditions. We also handle Therma-Tru door glass, sidelites, and the framed opening work that comes with professionally installed entry systems. Our parts approach is simple: we use OEM Therma-Tru sills, hinges, weatherstripping, and glass where they still match the door, and quality aftermarket hardware only where the OEM part is discontinued or cost-prohibitive. If a fiberglass door’s skin and frame are sound, we repair and reseal. If the slab is delaminated or a patio door frame is rotting into the rough opening, we tell you straight that replacement is the honest call.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Therma-Tru Service Pricing in San Bruno

Service Typical Cost Range
Window Replacement $4,500 – $15,000
Impact Window Installation $8,000 – $25,000
Home Addition $45,000 – $130,000
Roof Repair $400 – $1,800

Door-specific work varies by scope: a sill replacement, weatherstripping refresh, and hardware adjustment run far less than a full entry system swap with sidelites. What drives the cost is whether the rough opening needs structural repair, which Therma-Tru model you’re installing, and whether glass or sidelites are part of the job. A free estimate from us includes the exact line-item scope, written, before any work starts. Call (833) 725-3508 and we’ll come out and price your Therma-Tru situation precisely.

Contractor marking a wooden beam with a speed square and pencil in San Bruno, CA

Serving San Bruno, CA — Our Local Coverage Area

We’re based in the San Bruno area and know this community well, and we also provide Therma-Tru service in Brisbane. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Therma-Tru Construction in San Bruno

My Therma-Tru entry door bottom is soft and the paint is bubbling – does the whole door need replacing?
Not always. A soft bottom rail usually means water has been getting behind the fiberglass skin through failed weatherstripping or a corroded sill. If the delamination is limited to the bottom few inches and the frame is sound, we repair the rough opening, install a new sill pan and OEM weatherstripping, and reseal the door. If the delamination extends up the slab or the frame is rotting, replacement is the honest call. Call (833) 725-3508 and we’ll tell you which one applies to your door.

Does the marine fog in San Bruno shorten the life of a Therma-Tru Smooth-Star patio door?
Fog itself doesn’t shorten the door’s life. What shortens it is fog combined with shade and splash, which keeps the threshold and bottom rail damp for months and accelerates corrosion on the sill and hardware. On San Bruno lots where the patio door faces a tight side yard or a neighbor’s wall, proper sill flashing and drainage matter more than anything. We size the weatherstripping and flashing for those conditions specifically.

Can you fit a new Therma-Tru door into a tight side yard on a narrow San Bruno lot?
We do it regularly. Door swings, landing space, and drainage all have to work within the setback, and we’ve set plenty of Therma-Tru slabs in 42-inch side yards on The Flats and up against hillside property lines. The key is planning the rough opening so the door drains away from the foundation and doesn’t trap water at the threshold. Free estimates include that planning.

We’re adding a second story or an ADU – when should we bring in Therma-Tru doors?
Early, ideally at rough framing. Door sizes, swing direction, and sidelite choices affect the framing, and bringing us in at plan stage means the rough opening is right before drywall goes up. For ADUs in San Bruno, where the city’s tight infill lots force small footprints, an outswing Therma-Tru entry door can buy back usable interior square footage. Call (833) 725-3508 while you’re still in design.

What should I do about my Therma-Tru door after a winter storm?
Check the bottom rail for swelling, run your hand along the sill for pitting or corrosion, and look for daylight under the weatherstripping. If the door drags or you see water staining inside, don’t wait until the next storm. A call now to (833) 725-3508 gets a repair scheduled before the next rain cycle.

Service Areas Near San Bruno

Beyond San Bruno, we provide Therma-Tru construction service to neighbors in Therma-Tru service in South San Francisco to the north, Therma-Tru service in Moss Beach over the hill on the coast side, plus nearby communities down the Peninsula including Millbrae, Burlingame, and Pacifica. Whenever your Therma-Tru doors need work, our coverage follows the 101 corridor and Highway 1. For the full picture, see our San Bruno service area page.

Book Your Therma-Tru Service in San Bruno Today

If your Therma-Tru door is swelling, sagging, leaking, or just not sealing like it used to, we’ll send a crew out to look at it. Call (833) 725-3508 to schedule a free estimate. We’ll tell you exactly what’s wrong and what it costs to fix it right.

Written by Nate Burrell, Owner at Brookside Contractors, serving San Bruno and the Peninsula.

Need Construction help in San Bruno? Licensed & insured · Free on-site estimates response · free estimates
Call (833) 725-3508
Areas We Serve

Request a Free Estimate in San Bruno

Tell us what you need — Brookside Contractors responds fast. No obligation.

By providing your information above, you acknowledge our Privacy Policy and authorize us to contact you by phone, email, or text about your service request, including from the local pros who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch