Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Construction in Lexington Hills, CA | Brookside Contractors
We provide independent Master Halco fence and gate installation, repair, and custom work across Lexington Hills (95031). We’re not manufacturer-affiliated or authorized. What that means in the Santa Cruz Mountains: we know how Master Halco aluminum, vinyl, and steel products hold up under red-flag wind events, ember fall, and steep-slope storm runoff, because we install and service them here every season. Call (833) 725-3508 for a free estimate.
Why Lexington Hills Residents Choose Us for Master Halco Service
Plenty of contractors say they install fencing. Few know Master Halco’s line the way we do: which aluminum gauge handles a 30% slope without twisting, which vinyl profile survives years of south-slope UV, which gate hinge spec holds true on a driveway that drops six inches over ten feet. Nate Burrell grew up in the Paradise Valley area of Morgan Hill, trained in construction technology at Gavilan College in Gilroy, and spent the better part of two decades on job sites throughout South Santa Clara County. When he sends our crew up Old Santa Cruz Highway to a Lexington Hills job, we’re not figuring out the product on your dime. We already know how it performs in this terrain. Master Halco sales & service pages tell you what the manufacturer makes. We tell you what actually works here.
Styles & brands we work with
Common Master Halco Construction Problems We Solve in Lexington Hills
- Vinyl panels cracking or warping from fire-season sun. South-facing slopes above the fog line get relentless UV from June through October. We regularly see Master Halco vinyl fence panels that buckled or split because they were installed without enough expansion tolerance. We correct the panel spacing, replace damaged sections, and set the rails so they don’t bind in the first hot stretch.
- Aluminum posts loosening in rocky, steep soil after winter rains. Lexington Hills soil alternates between powder-dry clay in summer and saturated mud in winter. A post set shallow in that cycle will lean within two years. We pull and reset posts in properly drained, deeper footings, then re-square the entire run.
- Steel fence rusting after ember-laden wind events. Ash and embers from nearby controlled burns and the occasional wildfire carry minerals that eat through powder coat faster than ordinary rain. We inspect for early corrosion at rail end caps and welded seams, treat the spots, and match the coating so the repair doesn’t look like a patch.
- Gate sagging or misalignment on sloped driveways. In Lexington Hills, a level driveway is rare. Gates on a grade fight gravity every day, and most sag failures come from under-specified hinges or frames installed without slope compensation. We rebuild the gate frame, re-hang with proper hinges, and set the latch so it catches clean.
- Post-heave damage from winter frost and runoff. Steep lots channel water downhill, and when that water freezes against a post, the ground can move. We install drainage where the grade demands it and use concrete footings sized for the specific slope, not the generic spec.
Master Halco Service in Lexington Hills: What Local Conditions Mean for Your Equipment
Here’s the thing nobody tells you until a job goes sideways: most Lexington Hills properties sit on private roads off Old Santa Cruz Highway where delivery trucks simply cannot turn around. A flatbed with 200 feet of aluminum fence panels will make it up the first switchback if the driver’s lucky, then block the road for an hour trying to back out. So we pre-assemble Master Halco fence panels at our staging area, load them onto smaller trailers, and shuttle them up in sections. It adds a day to some jobs, sure. But it prevents damaged panels, pissed-off neighbors, and a truck stuck nose-down in a ditch. That’s the local knowledge that separates a fence that goes up in three days from one that takes three weeks of rescheduling. Lexington Hills service area work is different. We plan for it before we ever leave the yard.
Master Halco Models & Products We Service in Lexington Hills
We work on the full Master Halco residential range. That’s the Master Halco Aluminum Fence (Residential series), the Master Halco Vinyl Fence in both Privacy and Picket styles, the Master Halco Steel Fence (Ornamental), and both Driveway and Walk gate systems. For critical connections and hardware, we use OEM Master Halco parts: brackets, hinges, gate latches, and rail ends. Structural integrity isn’t the place to save $6 on a knockoff. For non-critical accessories, we use high-quality aftermarket components where they meet or exceed OEM spec. We stock common Master Halco hardware and panel colors locally, so most Lexington Hills repairs don’t wait on a distributor.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Service Pricing in Lexington Hills
Here’s what to expect for the fence and driveway work we do most often in Lexington Hills:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
What drives the cost here: slope, soil conditions, fence length, whether your private road allows standard equipment, and whether we’re removing an old fence first. Your free estimate includes a walk of the property line, a written line-item quote, and an honest repair-or-replace assessment. Call (833) 725-3508 for your exact number.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well, and we also provide Los Gatos Master Halco service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Master Halco Construction in Lexington Hills
A vinyl fence will not catch fire the way an old wood fence will, but it will soften, warp, and melt under sustained heat or direct flame exposure. For wildfire defensibility, we typically recommend Master Halco aluminum fencing for the zones closest to the structure. Vinyl works well for privacy runs farther from the home and for garden enclosures. Call (833) 725-3508 and we’ll walk your property to assess what belongs where.
We pre-assemble fence panels at our staging area, then shuttle them up in smaller trailers. We also set posts in concrete footings sized for the specific slope, not the generic spec. Last spring, we handled Master Halco service in Monte Sereno and installed a Master Halco aluminum fence along a steep, wooded property line off Old Santa Cruz Highway. The homeowner wanted a fire-resistant barrier that wouldn’t block emergency access, so we used the Master Halco Aluminum Fence with a custom gate and set posts in concrete footings designed for the slope. Despite having to stage materials at the bottom of the hill and shuttle them up, we completed the job in three days and the fence has already withstood a red-flag wind event without damage.
Twenty to thirty years is realistic when the fence is installed with proper slope footings and drainage. The main threats here are post lean from saturated soil, gate sag on grades, and coating degradation from ember exposure. Regular inspection of hinges and post bases extends the life significantly. Call (833) 725-3508 for an evaluation.
Yes, most fences over three feet require a Santa Cruz County permit, and Lexington Hills sits in a WUI zone with additional fire-safety requirements. We also offer Master Halco repair in Cambrian Park, and Master Halco’s aluminum and steel fence lines meet the ignition-resistant standards where fencing is part of the defensible space plan. We pull the permits, schedule the inspections, and stand behind the pass. Call (833) 725-3508 so we can check your specific parcel.
In most cases, yes. We replace damaged hinges, latches, and gate frames with OEM Master Halco hardware and keep your existing panels. If the gate is significantly rusted, sagged beyond re-squaring, or the frame is compromised, we’ll tell you straight whether repair or replacement makes more financial sense. Estimates are free at (833) 725-3508.
Service Areas Near Lexington Hills
From our base in South Santa Clara County, we cover Lexington Hills and the surrounding mountain and valley communities: Morgan Hill, San Martin, Gilroy, Corralitos, Interlaken, and Day Valley. We also serve Master Halco service in La Selva Beach and Master Halco service in Seacliff. If you’re within reach of Highway 17 or the Old Santa Cruz Highway corridor, call us.
Book Your Master Halco Service in Lexington Hills Today
Whether you need a new fire-resistant aluminum fence, a vinyl privacy run, a driveway replacement, or Master Halco repair in Scotts Valley, we’ll send someone who knows Lexington Hills slopes and Master Halco specs. Call (833) 725-3508 to schedule your free estimate. Do it once, do it right – everything else is just a future repair bill.
Written by Nate Burrell, Owner & General Contractor at Brookside Contractors, serving Lexington Hills and the Santa Cruz Mountains.