Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Wrightwood, CA | Brookside Contractors
We install and repair Jerith vinyl and aluminum fencing across Wrightwood as a General Contractor – Wrightwood independent, not a factory rep. What makes our Jerith work different here is simple: we build for 6,000 feet of elevation, snow load, and fire code, not for a flatland subdivision. Call (833) 725-3508 for a free estimate on Jerith fence work in Wrightwood, CA.
Why Wrightwood Residents Choose Us for Jerith Service
Jerith fences fail in Wrightwood for reasons that have nothing to do with manufacturing defects. They fail because posts get set to flatland depth in soil that freezes four feet down. Because vinyl that survives a decade in Rancho Cucamonga turns brittle after five years of high-altitude UV on a south-facing slope. Because a gate hinge spec’d for a level backyard in Ontario can’t hold a panel on a 20-degree grade off Lone Pine Canyon Road the way Jerith in Phelan terrain demands.
We know Jerith’s product line, and we know Wrightwood’s conditions. Nate Burrell, our owner and general contractor, trained in construction technology and spent years on job sites before bringing that experience to mountain fencing. His signature line on every Jerith job we take: “Do it once, do it right – everything else is just a future repair bill.” That’s not a slogan with us. It’s how we quote, how we set posts, and how we choose hardware. We use genuine Jerith replacement panels, posts, caps, and brackets when the profile is still current, and we match quality aftermarket hardware only where OEM parts are discontinued or back-ordered. No shortcuts on snow-load reinforcement, no flatland frost-depth assumptions.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Wrightwood
- Cracked or shattered vinyl panels from snow load and ice jacking. When posts are set to the same depth a crew would use in the valley below, winter freeze-thaw cycles heave the footings. Panels take the stress and split. We see this most on north-facing runs where snow sits and melts repeatedly through March.
- Post and rail separation at joints from frost heave. Wrightwood’s frost line runs deeper than most flatland contractors assume. A footing that’s 24 inches deep will move here. We set below the frost line with gravel-drained footings, and we check the existing depth before we ever quote a repair.
- UV chalking and embrittlement on south and west-facing vinyl. The sun at 6,000 feet is relentless. After five to seven years, vinyl panels that look fine from the road can crack like eggshell under wind load. We’ll tell you honestly when a section is too far gone to save, and we won’t sell you a repair that fails next winter.
- Aluminum fence sections loosening or bending at brackets on steep grades. Wrightwood lots aren’t flat. Racking an aluminum fence properly on a slope takes a different bracket spec and more care than a flatland install. Most of the sagging gates we fix off Highway 2 are hinge failures, not fence failures.
- Gate sag where hinges weren’t spec’d for the grade. This one shows up within a year or two. The gate looks fine on day one, then starts dragging in January after the first real freeze. We shim for the grade and use hardware that holds through snowmelt and spring thaw.
Jerith Service in Wrightwood: What Local Conditions Mean for Your Equipment
Wrightwood sits inside a state-designated Very High Fire Hazard Severity Zone, and that changes what a fence means here. A fence run isn’t just a property line. Material choice and placement interact with defensible-space requirements and Chapter 7A ignition-resistant construction expectations in ways a flatland fence job never has to reconcile. An aluminum Jerith fence along a wildland edge behaves differently under fire conditions than vinyl, and where you place a vinyl privacy run relative to the home’s defensible-space perimeter matters for code compliance. We don’t just dig holes and set posts. We look at the lot, the slope, the prevailing wind, the fire zone map, and we build the fence that holds up to Wrightwood’s actual conditions, winter and fire season alike.
On a sloped, tree-dense lot off Lone Pine Canyon Road, our crew replaced a frost-heaved Jerith Grandview vinyl privacy run—similar to Silver Lakes Jerith service conditions—where the original footings had been set to flatland depth and the panels had cracked under snow load and ice jacking. We reset posts below the frost line with deeper, gravel-drained footings, swapped the failed panels with genuine Jerith replacements, and shimmed the gate for the grade. That run has held through two winters of snow and melt since. That’s the difference between fencing knowledge and Wrightwood fencing knowledge.
Jerith Models & Products We Service in Wrightwood
We work on the full Jerith residential line: Ornamental Aluminum Fence in rackable styles for sloped lots, Grandview Series vinyl privacy fence, Manchester Series vinyl fence, and the picket and semi-privacy vinyl styles. Our parts approach depends on what we’re fixing. Where the profile is still current, we use genuine Jerith replacement panels, posts, caps, and brackets. Where OEM parts are discontinued or back-ordered, we match quality aftermarket hardware that holds up to mountain conditions. We don’t stock shelves of flatland inventory. We order for your specific run and your specific elevation. For more on the full Jerith range, see our Jerith sales & service page.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Wrightwood
Fencing costs in Wrightwood run slightly higher than flatland markets because posts go deeper, footings need gravel drainage, and steep lots take more labor. Here’s what you can expect:
| Service | Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
The range depends on linear footage, slope, access, and what we find when we dig. A repair on one failed section costs far less than a full replacement, and we’ll always give you the repair-first option when the fence is mostly sound. A free estimate gets you written line-item pricing, not a ballpark. Call (833) 725-3508 to schedule yours.
Serving Wrightwood, CA — Our Local Coverage Area
We’re based in the Wrightwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Wrightwood
No. We are an independent contractor. We are not authorized, sponsored, or endorsed by Jerith. We install and repair their products because we know the product line well and we know how it behaves in high-elevation mountain conditions. What we bring is real-world experience with Jerith fences in Wrightwood, not a manufacturer partnership. For a free estimate on your Jerith fence work, call (833) 725-3508.
Yes, whenever the profile is still current. We use genuine Jerith replacement panels, posts, caps, and brackets on most repairs. Where OEM parts are discontinued or back-ordered, we match quality aftermarket hardware that holds up to snow load, UV, and freeze-thaw. We’ll tell you which parts you’re getting before we start.
A straight panel replacement or gate repair on a level section is usually a one-day job. A full install on a steep, sloped Wrightwood lot takes longer because of footing depth, drainage work, and grade adjustments. We give you a written timeline with your estimate, and we stick to it. Call (833) 725-3508 to get your project scheduled.
We service the full residential Jerith line: Ornamental Aluminum Fence, Grandview Series vinyl privacy fence, Manchester Series vinyl fence, and the picket and semi-privacy vinyl styles, including Piñon Hills Jerith service areas. If you have a Jerith fence that’s failing on a slope, under snow load, or from UV brittleness, we can assess it and give you repair and replacement options.
A section repair or gate fix on a mostly sound fence typically falls in the low hundreds to low thousands, depending on linear footage, access, and whether we’re replacing panels or resetting frost-heaved posts. Full vinyl fence installation runs $3,500 to $9,000, and aluminum runs $4,000 to $10,000 in this market. The best way to know your number is to call (833) 725-3508 for a free, written, line-item estimate.
Service Areas Near Wrightwood
We work throughout Wrightwood and the surrounding mountain and foothill communities of the San Gabriel Mountains. If you’re outside the immediate 92397 ZIP but close enough for our crews to reach, we can likely help. For Jerith service in the high desert, see Jerith service in Adelanto. For our work in the South Bay, see Jerith service in Morgan Hill. We also cover the broader region through our Wrightwood service area page.
Book Your Jerith Service in Wrightwood Today
If your Jerith fence is cracking, sagging, or pulling loose at the posts, don’t wait for the next freeze-thaw cycle to finish the job. Call Brookside Contractors at (833) 725-3508 for a free estimate on Jerith fence repair or replacement in Wrightwood, CA. We’ll assess the run, quote it honestly, and build it for the mountain.
Written by Nate Burrell, Owner & General Contractor at Brookside Contractors.