Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Lompico, CA | Brookside Contractors
We’re Brookside Contractors, and we handle Belgard paver, wall, and hardscape installations across Lompico up Lompico Road from Felton. We’re an independent Belgard service provider, which means we’ll tell you straight what a product will and won’t do on a steep, wooded canyon lot rather than reading from a manufacturer brochure. If you’re planning a paver driveway, patio, or retaining wall in the 95005 zip code, call (833) 725-3508 for a free estimate and we’ll walk the site with you.
Why Lompico Residents Choose Us for Belgard Service
We’ve been on enough Lompico jobs to know the difference between a Belgard install that holds and one that doesn’t. That comes from years of correcting and completing installations that were never built for Santa Cruz Mountains conditions in the first place. Our owner, Nate Burrell, grew up watching half of Paradise Valley get framed up when he was a kid, and he trained in construction technology at Gavilan College before spending two decades on job sites across South Santa Clara County. When he says a base needs another six inches of compacted aggregate, it’s because he’s pulled apart the walls that skipped it.
We use Belgard OEM wall caps, edge restraints, and joint sand as standard. Aftermarket substitutes often fail under Lompico’s wet-dry cycling within two or three winters. That’s not a theoretical concern. We’ve seen it repeatedly on driveways and retaining walls throughout this canyon. When you call us, you get a crew that knows the product line well enough to tell you which Belgard series fits your slope, your drainage pattern, and your fire-hardening requirements, not just which one is on the shelf.
Styles & brands we work with
Common Belgard Construction Problems We Solve in Lompico
Here’s what we typically find when we get called out to a Lompico property:
- Paver joint sand washout and edge restraint failure on steep driveways. Lompico’s winter runoff moves downslope with serious force, and without a properly anchored edge restraint, that sand goes with it. Pavers then shift, crack, and spread. We rebuild edges with Belgard OEM restraints and re-sweep joint sand engineered for wet conditions.
- Retaining wall block settlement and overturning from inadequate base compaction. Lompico’s clay-heavy slopes expand and contract through the wet season. If the base wasn’t compacted in lifts and the drainage aggregate was skipped, the wall starts leaning by spring. We don’t patch the face. We rebuild the base.
- Surface spalling and color loss on Belgard pavers exposed to heavy rain and freeze-thaw cycles. The canyon gets cold enough at night in winter to cycle moisture through the paver surface. Cheap sealers and non-OEM replacement pavers fade or flake fast. We match existing Belgard color and texture.
- Improper connection to fire-resistant detailing. Lompico sits in a wildland-urban-interface zone, and Chapter 7A-style exterior assemblies matter. Non-rated wall caps or combustible edge restraints compromise the whole assembly. We install Belgard components that meet the fire-resistance requirements for the area.
- Driveway aprons that send runoff into the wall face. It’s not enough to build a good wall. The hardscape around it has to direct water away. We frequently add a Belgard paver apron after repairing a wall, because the original install let sheet flow hit the base every storm.
Belgard Service in Lompico: What Local Conditions Mean for Your Equipment
Lompico is an unincorporated, heavily wooded canyon community in the Santa Cruz Mountains, and nearly every build here is a wildland-urban-interface and slope project. You’ve got steep lots, mature redwood and tanoak canopy, septic-and-well infrastructure, and narrow private roads that dictate how materials and equipment even reach the site. Construction here isn’t subdivision tract work. It’s fire-hardened, geotechnical, and access-constrained custom building that would be a very different job down the hill in Felton or Ben Lomond.
Here’s what that means for Belgard work specifically. Lompico’s narrow private roads off Lompico Road often can’t accommodate a standard flatbed delivery of Belgard pallets. A truck that handles a Felton cul-de-sac without blinking will bottom out or simply not fit around the hairpins up here. So we stage materials at the road and shuttle them up steep driveways with compact equipment. That changes how every hardscape job is sequenced, from how many pallets we order at once to which machine we bring for base excavation. A contractor who’s never worked this canyon will quote you like it’s a flat lot. Then the delivery truck shows up, can’t turn around, and suddenly your schedule and budget are both blown. We plan for that before we ever give you a number.
Belgard Models & Products We Service in Lompico
We install and service the Belgard product lines that actually make sense for mountain lots. The Belgard Symmetry Series is a clean, modular paver system that handles driveway and patio loads when the base is done right. The Belgard Dimensions Series offers larger-format pavers that cut down on joint lines, which means fewer places for water to get in. For retaining walls, we work most often with the Belgard Weston Wall block system and the Belgard Anchor Highland Stone line. Both are solid choices for Lompico’s slopes when paired with proper geogrid and drainage. We keep commonly needed OEM caps, edge restraints, and joint sand in our local inventory so turnaround on repairs doesn’t stall while parts ship from a distributor. When a wall is settling due to base or drainage issues, we rebuild the base rather than patch the face. Replacement is usually cheaper than repeated repairs, and it’s the only way to stop the same call from coming back next spring.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Lompico
Here’s what Belgard paver and related hardscape work typically runs in this market:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
Your specific number depends on slope, access, drainage work, and how much base prep the site requires. A flat patio with easy access lands at the low end. A steep driveway that needs material shuttling, geogrid, and retaining elements lands at the high end. Every free estimate we give includes a written line-item quote so you can see exactly what’s driving the cost. Call (833) 725-3508 to schedule one.
Serving Lompico, CA — Our Local Coverage Area
We’re based in the Lompico area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Lompico
Yes, but only with proper base compaction, edge restraint anchoring, and drainage planning. Steep driveways in Lompico need deeper aggregate bases and often geogrid reinforcement to resist downslope creep. We’ve rebuilt driveways where the original install skipped these steps and the pavers began migrating within one wet season. Call (833) 725-3508 for a site evaluation and exact quote, free of charge.
They handle it well when the base and drainage are engineered for it. Lompico’s clay-heavy slopes expand when wet and contract when dry, which is exactly what causes poorly built walls to lean or overturn. We install Belgard Weston Wall and Anchor Highland Stone systems with OEM geogrid and drainage aggregate behind the wall, then route surface water away from the face. Without that, any wall will eventually move here.
Belgard concrete pavers are non-combustible, which is a good start for wildland-urban-interface compliance. The weakness is usually the edge restraints, wall caps, and any adjacent deck or siding materials. We install Belgard components that hold up the fire-resistant assembly rather than compromising it. If you’re doing a hardscape project near the home, we’ll check the whole connection detail, not just the paver itself.
We stage at the road and shuttle. Lompico’s private roads off Lompico Road often can’t take a standard flatbed, so we plan smaller loads, use compact equipment for the shuttle up the driveway, and sequence the job so we’re not stacking pallets where the delivery truck can’t turn around. We rebuilt a failing Belgard Weston Wall retaining wall on a steep driveway off Lompico Road where the original base had been set on uncompacted soil and the wall was overturning after winter rains. Our crew removed the block, re-excavated to proper depth, installed Belgard OEM geogrid and drainage aggregate, and reset the wall with new caps, then added a Belgard paver apron to direct runoff away from the wall face. That project would not have happened smoothly without staging the materials at the road first.
Most Lompico paver patio projects land between $3,500 and $11,000, depending on slope, access, and drainage corrections. Call (833) 725-3508 for a free line-item estimate on your specific site.
Service Areas Near Lompico
We also handle Belgard work in Morgan Hill, San Martin, Gilroy, Corralitos, Interlaken, and Day Valley. If your project is near Belgard service in Twin Lakes or you need Belgard service in Pasatiempo, we can cover that too. For anything Belgard-related, see our Belgard sales & service page, and for the full picture of where we work, check the Lompico service area page.
Book Your Belgard Service in Lompico Today
If you’ve got a paver driveway, patio, or retaining wall in Lompico, or one that’s failing, call (833) 725-3508. We’ll schedule a free site walk, give you a written quote, and tell you exactly what’s needed. Do it once, do it right, everything else is just a future repair bill.
Written by Nate Burrell, Owner at Brookside Contractors, serving Lompico and the Santa Cruz Mountains.