Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Redwood Shores, CA | Brookside Contractors
We install and repair Belgard paver patios, driveways, and retaining walls throughout Redwood Shores’s 94065 ZIP code. The short answer: Redwood Shores sits on engineered fill over former bay marsh, so every Belgard job here lives or dies by what’s under the pavers. Nate Burrell and our crew handle the base, drainage, and geotech details most contractors skip. Call (833) 725-3508 for a free estimate on Belgard work in Redwood Shores.

Why Redwood Shores Residents Choose Us for Belgard Service
We know Belgard’s product lines the way a mechanic knows an engine, because we’ve torn apart enough failed patios to see what works. Urbana Stone, Weston Stone, Catalina granite, Dimensions slabs. Each one behaves differently under Redwood Shores conditions. Some hold joint sand through months of fog; others need a specific base depth to survive the fill ground. That field knowledge is what you’re hiring. Not a vendor badge.
Nate Burrell grew up in Morgan Hill’s Paradise Valley, trained in construction technology at Gavilan College, and has spent two decades on job sites across South Santa Clara County. He got into this trade after watching his dad’s garage addition crumble under a cheap crew. His approach hasn’t changed since: do it once, do it right, everything else is just a future repair bill.
We’re an independent Belgard service provider. We’re not manufacturer-affiliated or authorized, and we’re upfront about that. What we offer is Belgard sales & service expertise built from installing and repairing these systems across the Bay Area, plus honest guidance on when a patio needs a full base rebuild versus a top-dress fix.
When you call us about Belgard work in Redwood Shores, you’re talking to a licensed general contractor who can also handle the full property scope: kitchens, bathrooms, roofing, fencing, ADUs, and hardscaping under one roof. One point of contact. No baton-passing between trades.
Styles & brands we work with







Common Belgard Construction Problems We Solve in Redwood Shores
- Polymeric joint sand washing out and efflorescence blooming. The bayfront fog here keeps Belgard pavers damp for weeks at a stretch. If the base doesn’t slope away from the field, the cheapest joint sand turns to mush and white mineral deposits show up within the first wet season. We re-slope, re-set, and re-sand with quality polymeric product rated for wet conditions.
- Paver settlement and lippage over the fill. Redwood Shores ground isn’t native soil. It’s engineered fill over old marsh, and when a base wasn’t over-excavated and recompacted, pavers sink unevenly. You see it as trip-hazard edges and low spots that pond after rain. We dig it out to stable ground and rebuild.
- Retaining wall blocks bowing outward. The water table here sits just below grade. A Belgard wall without drainage aggregate and weep points holds hydrostatic pressure behind it, and the face starts to bulge within a couple of seasons. We rebuild with proper drainage so the wall drains instead of bending.
- Granite and slab pavers spalling on shaded north-facing patios. Belgard Catalina and Dimensions pavers on the shaded side of a Redwood Shores home can stay damp between fog cycles. That constant moisture and salt air eventually flakes the surface. We often switch those spots to a paver line better suited to shaded, marine exposure.
- Edge restraints failing where HOA landscaping meets the hardscape. Redwood Shores has mature, HOA-managed planting beds right up against many patios and walkways. Roots push out plastic edge restraints and the perimeter pavers drift. We install steel or concrete edge systems that actually hold the line.
Belgard Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Here’s what most Belgard installers miss about Redwood Shores, and it’s the reason so many patios here fail early: this entire community was built on engineered fill over former marshland beside the San Francisco Bay. That means even a modest paver patio or driveway can trigger geotechnical review through BCDC or city shoreline requirements, and it means you hit bay mud or perched groundwater within a few feet of digging. Almost never happens a few miles inland.
On a Belgard paver patio behind a two-story stucco home in the Redwood Shores planned developments, our crew found perched groundwater just below the old concrete. The prior base had settled into the fill. We over-excavated, brought in free-draining base rock, set a positive slope away from the house, and re-laid Urbana Stone with fresh polymeric joint sand. The chronically pooling patio now sheds water through the wet season instead of puddling at the slider.
What this means for you: the base depth, drainage plan, and permit sequencing define whether your Belgard investment lasts five years or twenty-five. That’s the work we do. For any Belgard in San Carlos or Redwood Shores project, we factor in the fill, the water table, and the shoreline review from the first site visit, not as an afterthought.
Belgard Models & Products We Service in Redwood Shores
We work with the Belgard lines that hold up best in Redwood Shores’s marine-influenced, wet-ground conditions. Urbana Stone pavers are a frequent choice for patios because they handle moisture well when the base is right. Weston Stone retaining wall block works for low garden walls, but only with proper drainage behind it on the high water table. Catalina granite pavers and Dimensions slab/plank pavers give a modern look, though we flag shaded exposure concerns before you commit to those on a north-facing patio.
On parts, we use Belgard’s own retaining-wall units, caps, and compatible edge restraints rather than aftermarket pieces that don’t seat correctly. And we specify quality polymeric joint sand, not the cheapest bag on the shelf. For existing Belgard patios in Redwood Shores, our repair-or-replace call comes down to one question: is the base sound? If the pavers are intact but the base has failed over fill or wet ground, we rebuild the base and re-lay the units. Top-dressing a failed base just means you’ll pay us again in two years.
Beyond hardscaping, Redwood Shores service area projects often pair Belgard patios with other exterior and interior work. We handle the full property: paver driveways, bathroom remodels, kitchen overhauls, roofing, fencing. One contractor, every phase.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Redwood Shores
Here are the line-item ranges we quote for Belgard work in Redwood Shores:
| Service | Price Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Bathroom Remodel | $9,000 – $28,000 |
What drives the cost most in Redwood Shores is what we find underground. A patio over shallow fill with no groundwater is a straightforward base-and-lay. A patio that needs deep over-excavation, imported base rock, and a drainage system costs more because it takes more material and more machine time. Our free estimate includes a site visit, a look at the existing grade and drainage, and a written line-item quote. No change orders layered on mid-job. Call (833) 725-3508 to schedule yours.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well, and we also serve Belgard in San Mateo. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Redwood Shores
Yes, in most cases. The engineered fill and high water table here mean we over-excavate deeper than inland sites, bring in free-draining base rock, and often install a geotextile separator so the base doesn’t mix with the underlying fill and lose strength. Skipping this is the fastest way to a sunken patio. Call (833) 725-3508 and we’ll tell you what your specific yard needs.
Yes, if it’s built with drainage behind the wall. We use clean drainage aggregate, a perforated pipe at the base, and weep points through the wall face so hydrostatic pressure never builds against the blocks. Without that, the wall will bow. We also size the base and geogrid for the soft fill conditions rather than copying an inland wall detail.
Because Redwood Shores fog and damp marine air keep pavers wet for long stretches, and the high water table keeps moisture coming up from below. Cheap joint sand breaks down and washes out, and efflorescence blooms from the constant moisture movement. We use quality polymeric sand and correct the base drainage so water moves away from the field, not through it.
Quite possibly. Redwood Shores is under BCDC and city shoreline review jurisdiction, and a new paver driveway or patio often requires geotechnical review because of the engineered fill. We handle the permit sequencing as part of the job, pull permits where required, and get inspections passed. That’s part of our fixed-price scope, not an add-on surprise.
Settlement. Pavers over fill that wasn’t properly over-excavated and recompacted sink unevenly, creating low spots and lippage. It’s especially common on patios built by crews who priced the job as if it were inland native soil. The fix is a full base rebuild, which we do properly the first time. Call (833) 725-3508 for an honest assessment of your existing patio.
Service Areas Near Redwood Shores
We serve Redwood Shores and the surrounding Bay Area communities, including Belgard service in Belmont, Belgard service in Foster City, San Mateo, San Carlos, and the broader Peninsula corridor. If you’re nearby and weighing a Belgard patio, driveway, or wall, we’ll come out and take a look.
Book Your Belgard Service in Redwood Shores Today
If your Belgard patio is settling, your wall is bowing, or you’re planning new hardscape in Redwood Shores, call us. We’ll send a crew out, assess the ground and the drainage, and give you a straight answer with a written quote. Estimates are free. Call (833) 725-3508 to schedule yours.
Written by Nate Burrell, Owner at Brookside Contractors, serving Redwood Shores and the wider Bay Area since the start of his contracting career.