Unilock Construction in Boulder Creek, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Unilock Construction in Boulder Creek, CA | Brookside Contractors

We install, repair, and replace Unilock paver driveways, patios, and retaining walls throughout Boulder Creek (95006). What makes our Unilock work here different is simple: we understand that a paver driveway on a steep, redwood-covered lot behaves nothing like one on a flat valley lot. If you’re planning Unilock construction in Boulder Creek or your existing pavers are failing, call (833) 725-3508 for a free estimate.

Contractor marking a wooden beam with a speed square and pencil in Boulder Creek, CA

Call (833) 725-3508

Brookside Contractors is an independent Unilock service provider. We’re not manufacturer-affiliated or authorized, which means we match the product to the project rather than pushing a corporate spec. Nate Burrell, our owner and general contractor, has spent two decades on job sites throughout South Santa Clara County and the Santa Cruz Mountains, and he’s the first to tell you that hardscape work in Boulder Creek demands more than a catalog and a compactor.

Why Boulder Creek Residents Choose Us for Unilock Service

Most hardscape crews know pavers. Few know what happens to pavers when redwood duff never dries, winter runoff channels through a sloped base, and the only access to your lot is a one-lane mountain road. We’ve been doing Unilock work in Boulder Creek long enough to know that the failure usually starts underneath the paver, not on top of it. That’s why our first step on any repair or install is a look at drainage, base compaction, and root presence before we touch a single paver.

Nate Burrell grew up in Morgan Hill’s Paradise Valley, where half the neighborhoods were still being framed when he was a kid. That’s probably what put a hammer in his hand before he could drive. He trained in construction technology at Gavilan College, then spent the better part of two decades on job sites throughout South Santa Clara County. His philosophy transfers directly to Unilock work in Boulder Creek: do it once, do it right, everything else is just a future repair bill. We apply that standard to every paver we set, every base we compact, and every edge restraint we anchor.

We also maintain a relationship with Unilock supply channels, which means we can get genuine Unilock pavers for repairs without waiting weeks. For full installations, we help Boulder Creek homeowners choose the right Unilock line for their slope, shade, and drainage conditions. Our broader work includes Unilock sales & service across the Santa Cruz Mountains, and as a full general contractor we handle everything from the driveway to the house itself.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common Unilock Construction Problems We Solve in Boulder Creek

  • Efflorescence and moisture staining on Brussels Block and Cambridge Cobble. Boulder Creek’s fog and redwood canopy keep north-facing hardscapes damp for months at a time. The result is white mineral staining and dark moisture blooms that don’t show up in drier climates. We remove the staining, address the drainage issue feeding it, and reseal with a breathable sealer rated for high-moisture environments.
  • Settling and shifting pavers on sloped driveways. Steep lots put relentless downhill pressure on paver bases. When the original install skimped on base compaction or didn’t account for runoff, you get sunken sections, popped edges, and a driveway that drains toward your garage instead of away from it. We rebuild the base properly, often adding geogrid reinforcement on grades over 8 percent.
  • Root heave from redwood roots. Redwood roots are persistent. They push up pavers, crack retaining walls, and undo years of good work in a single wet season. We remove offending roots (with care for the tree where possible), install root barriers, and rebuild the affected section so it stays flat.
  • Edge restraint failure on narrow mountain roads. When equipment can’t reach the site and materials come in by hand, the temptation is to cut corners on edge restraints. That’s how pavers migrate outward and the driveway starts to unravel at the shoulders. We spec aluminum or concrete edging that actually holds, even on tight lots off narrow Boulder Creek roads.
  • Drainage failures under and around pavers. Winter rain in the Santa Cruz Mountains is heavy and sustained. Any hardscape that doesn’t account for sheet flow, downspout discharge, or slope will fail. We integrate drainage solutions like French drains, channel drains, and proper base grading as part of the paver work, not as an afterthought.

Unilock Service in Boulder Creek: What Local Conditions Mean for Your Equipment

Here is what generic hardscape sites won’t tell you about Boulder Creek: many driveways and patios sit on steep, tree-covered slopes where pavers must be installed on terraced or reinforced bases to prevent sliding. Flat-grade installation guides assume a level lot. They don’t account for a 15 percent grade with redwood roots running through it and winter rain saturating the subgrade. We recently rebuilt a failing Unilock Brussels Block driveway on a steep lot off Bear Creek Road, where redwood roots had heaved the pavers and winter runoff had eroded the base. We removed the old pavers, cut out the offending roots, installed a new compacted aggregate base with a geogrid, and reset the pavers with fresh edge restraints. The homeowner now has a stable, drained driveway that handles the slope and seasonal rain. And narrow one-lane roads throughout Boulder Creek often mean materials can’t simply pull up to the site. Concrete trucks and paver pallets get offloaded at the street and carried in by hand or small equipment. That changes labor costs, equipment choices, and scheduling. We plan for it from the first site visit. Anyone in Boulder Creek looking for hardscape work should be thinking about access before they think about color. We cover the whole 95006 zip code and the surrounding area, which is part of our broader Boulder Creek service area.

Unilock Models & Products We Service in Boulder Creek

We work with the Unilock lines that actually hold up in Boulder Creek conditions. Brussels Block is a common choice for driveways, but in shaded, damp lots, we tend to steer homeowners toward Beacon Hill or Cambridge Cobble for their surface texture and slip resistance. Pisa2 works well for retaining walls and steps, which many Boulder Creek lots need just to make the grade usable. For repairs, we source genuine Unilock pavers to match the existing color and texture. We also use high-quality aftermarket polymeric sands and edge restraints when they outperform OEM on steep or wet sites. That’s not a compromise, it’s a judgment call. Our Unilock sales & service experience means we know which aftermarket products hold up in the Santa Cruz Mountains and which don’t.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Unilock Service Pricing in Boulder Creek

Pricing for Unilock construction in Boulder Creek depends on four factors: grade, access, drainage, and roots. Steep lots cost more in base work. Tight access costs more in labor. Drainage and root mitigation add line items that flat lots never see. Here are market-calibrated ranges for the work we do:

Contractor marking a wooden beam with a speed square and pencil in Boulder Creek, CA
Service Price Range
Paver Driveway Installation $7,000 – $18,000
Paver Patio Installation $3,500 – $11,000
Driveway Replacement $5,000 – $14,000
Driveway Sealing $250 – $700

Every free estimate includes a written line-item quote, a drainage assessment, and an access plan. No change orders hiding in the fine print. Call (833) 725-3508 to schedule yours.

Serving Boulder Creek, CA — Our Local Coverage Area

We’re based in the Boulder Creek area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Unilock Construction in Boulder Creek

Service Areas Near Boulder Creek

We provide Unilock construction throughout the Santa Cruz Mountains and South Santa Clara County. That includes Boulder Creek, plus Morgan Hill, San Martin, Gilroy, Corralitos, Interlaken, and Day Valley. For Unilock work in the neighboring communities, we also offer Unilock service in Castroville and Unilock service in Sunnyvale.

Book Your Unilock Service in Boulder Creek Today

If your Unilock pavers are heaving, staining, or settling on a Boulder Creek slope, don’t wait for the next storm to make it worse. Call (833) 725-3508 to schedule a free estimate with Brookside Contractors.

Written by Nate Burrell, Owner at Brookside Contractors, serving Boulder Creek and the greater Santa Cruz Mountains.

Need Construction help in Boulder Creek? Licensed & insured · Free on-site estimates response · free estimates
Call (833) 725-3508
Areas We Serve

Request a Free Estimate in Boulder Creek

Tell us what you need — Brookside Contractors responds fast. No obligation.

By providing your information above, you acknowledge our Privacy Policy and authorize us to contact you by phone, email, or text about your service request, including from the local pros who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch