Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Abodu Construction in Colma, CA | Brookside Contractors
We’re an independent Colma General Contractor that assembles, sets, and finishes Abodu backyard homes across Colma. But the reason our Abodu work here looks different from anywhere else on the Peninsula is simple: every lot is jammed against a cemetery boundary or a retail-parking easement, and the fog never lets up. That changes how we stage, how we seal, and how we connect utilities. Call (833) 725-3508 for a free estimate, or keep reading to see what that actually means for your project.

Why Colma Residents Choose Us for Abodu Service
We’ve built and finished multiple Abodu units in San Mateo County, including Abodu in Pacifica, so the factory panel system isn’t a learning curve for us. We know the panel joints, the rough-in tolerances, and the places where moisture finds its way in when the fog sits on a unit for weeks at a stretch. We’re not authorized by Abodu, and we don’t pretend to be. We work for you, the owner, and that changes the advice we give.
Nate Burrell runs our operation. He trained in construction technology at Gavilan College, learned structural work and plan reading before he could legally buy a beer, and spent two decades on job sites before hanging his own shingle. When he talks about a pier foundation or a sealant line, he’s not reading from a brochure. He’s seen what happens in Colma when standard galvanized hardware meets damp marine air, and he specs accordingly.
We do it once, do it right. Everything else is just a future repair bill.
We’re independent, which matters here more than anywhere. When we spot a factory rough-in that won’t line up with an aging Colma cottage’s utility service, we fix it in the field and tell you exactly why. No finger-pointing at the manufacturer. No change-order games. One contractor, every phase.
Styles & brands we work with







Common Abodu Construction Problems We Solve in Colma
- Fog-driven moisture intrusion at panel seams. Colma’s marine layer hangs around for months, and any small gap in the factory sealant line turns into damp drywall and bubbling paint on the interior. We re-flash panel junctions and re-seal with marine-grade products that actually hold up in this climate.
- Pier-and-cribbing settling on infill lots. Much of Colma’s buildable ground sits on fill that was never compacted properly, whether it’s cemetery-adjacent or graded decades ago for commercial use. Units start level and then drift, producing out-of-level floors and doors that stick within a season. We re-shim and stabilize the pier system before it gets worse.
- Condensation and corrosion on exterior hardware. The fog belt eats standard galvanized fasteners, door hardware, and roof flashings faster here than anywhere inland. We swap in stainless or hot-dip galvanized replacements that are actually spec’d for a damp marine environment.
- Utility stub-out mismatches with old wood-frame cottages. Colma’s residential stock is mostly early-20th-century and post-war homes with undersized or unpermitted electrical and plumbing services. The Abodu unit’s rough-in locations often don’t line up, which forces field rework at the connection point. We handle that rework directly.
- Staging and access constraints on tight lots. When your backyard runs up against a cemetery property line or a Serramonte lot line, you can’t just drop a crane anywhere. We plan the staging path, the panel lay-down area, and the sequence so the build doesn’t stall at the first survey flag.
Abodu Service in Colma: What Local Conditions Mean for Your Equipment
Here’s the thing people don’t tell you about Colma Home Remodeling with an Abodu: this isn’t a normal Peninsula ADU market, and treating it like one is how you end up with a unit that leaks, shifts, or gets red-tagged at final inspection. The residential footprint here is a handful of old wood-frame cottages squeezed between cemetery boundaries and retail-parking easements. Nearly every placement needs a survey and staging plan that threads the gap between a grave-site property line and a Caltrans right-of-way or Serramonte lot line. That constraint forces decisions: where the pier footings can sit, how close the panel delivery truck can get, whether the utility trench has to jog around an easement. No neighboring city in San Mateo County works this way. When we plan an Abodu placement near the El Camino Real town core, every move is choreographed around a boundary line. We’re used to it. Most GCs from elsewhere aren’t.
Near the El Camino Real town core, we set an Abodu service in South San Francisco and this Abodu One on a pier foundation behind an early-20th-century cottage. Within the first wet season, the panel seams along the north wall were wicking fog moisture into the interior trim. Our crew re-flashed the panel junctions, swapped standard fasteners for corrosion-resistant ones, and re-sealed with marine-grade sealant. The unit has stayed dry through two more fog seasons. That’s the difference between knowing the factory system and knowing what Colma does to it.
Abodu Models & Products We Service in Colma
We work across the full Abodu lineup: the Abodu One one-bedroom, the Abodu Two two-bedroom, the Abodu Studio and Jr. units, and the panelized site-built-on-pier foundation package as delivered for Peninsula lots. Our parts approach is straightforward. Where Abodu-specified OEM panels, trims, and sealants exist, we use them so the envelope stays as designed. Where OEM isn’t practical or available for the condition at hand, we match to quality equivalents: stainless or hot-dip galvanized fasteners, marine-grade sealants, trim that can actually hold up to Colma’s fog. We stock the common failure-point materials locally so a sealant or flashing repair doesn’t wait on a factory shipment from across the Bay. For more on our Abodu work and what we cover across the county, see our Abodu sales & service page.
See the difference
Before
After
Before
After
Before
AfterAbodu Service Pricing in Colma
What you’ll pay depends on scope: a full ADU build, a home addition, or a smaller kitchen package inside the Abodu unit. Below are the ranges we work within. Note that Colma’s tight lots and boundary-line constraints can add survey and staging costs that a roomy suburban lot wouldn’t carry, but we’ll walk you through every line item before work starts so you know exactly what’s driving the number.

| Service | Price Range |
|---|---|
| ADU Construction | $90,000 – $220,000 |
| Home Addition | $45,000 – $130,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
Every estimate is free and written line by line. We don’t hand you a single number and hope you won’t ask what’s inside it. Call (833) 725-3508 for an exact quote on your Abodu project in Colma.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Abodu Construction in Colma
Yes, and we’ve done it. The key is a survey and staging plan that confirms where the cemetery property line actually sits, then sequencing the panel delivery and crane placement so nothing crosses that line. We coordinate with the mortuary district when access touches their land and with Caltrans where I-280 frontage is involved. Call (833) 725-3508 and we’ll tell you whether your specific lot works before you spend a dime.
Almost always, it’s fog moisture getting through a panel seam or trim junction where the factory sealant has failed or was never fully continuous. Colma’s marine layer means the exterior of your unit is damp for months at a time, and any gap becomes a wicking point. We re-flash the junctions and re-seal with marine-grade products, and the problem usually stops. Call (833) 725-3508 and we’ll diagnose it on site.
Yes. This is one of the most common jobs we do here, because Colma’s older homes often have electrical and plumbing services that don’t match the factory rough-in locations on the delivered unit. We handle the rework at the connection point, pull the permits, and make sure the final inspection passes. Estimates are free: (833) 725-3508.
Yes, and this is one of the things we flag on nearly every service call. Standard galvanized fasteners corrode noticeably faster in Colma’s fog belt than they do a few miles inland. We spec stainless or hot-dip galvanized replacements for exterior hardware, roof flashings, and panel fasteners. If your unit was built with standard hardware, it’s worth an inspection. Call (833) 725-3508.
Plan for eight to fourteen weeks depending on the site, the permit queue, and how much boundary coordination your lot requires. Colma’s tight residential footprint and cemetery-adjacent lots sometimes add survey and staging days that a typical Peninsula build wouldn’t need. We’ll give you a realistic timeline after we walk the lot. Call (833) 725-3508 to schedule that walk.
Service Areas Near Colma
We serve Colma and the surrounding Peninsula. Our Abodu work extends to Colma service area neighborhoods, and nearby homeowners in Abodu service in Broadmoor and Abodu service in Daly City call us for the same fog-belt and tight-lot expertise. If you’re on the Peninsula, we’ll come take a look.
Book Your Abodu Service in Colma Today
If you’ve got an Abodu unit that’s showing moisture, settlement, or utility issues, or if you’re planning a new placement on a Colma lot, call (833) 725-3508. We’ll come out, walk the site, and give you a written estimate with real numbers, not hand-waving.
Written by Nate Burrell, Owner & General Contractor at Brookside Contractors, serving Colma and the Peninsula.