Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Morgan Hill Homeowners Choose Unilock Construction
We provide Unilock service in Morgan Hill, CA, for driveways, patios, walkways, and retaining walls built with Cambridge Pavingstones, Brussels Block, Beacon Hill, and the U-Cara Retaining Wall System. What sets our Unilock work apart is simple: we treat the base, drainage, and edge restraint as the foundation of the project, not an afterthought, because those are the layers that actually determine whether your pavers stay flat and locked in through Morgan Hill’s clay-soil winters and 100-degree summers. As an independent Unilock service provider, we are not affiliated with or authorized by Unilock, and we’ll never pretend otherwise; what we do bring is years of hands-on experience with these specific product lines in South Santa Clara County. If you’re dealing with shifted pavers, cracked edges, or efflorescence bloom, call us at (833) 725-3508 for a straight diagnosis and a free estimate.
Why Trust Brookside Contractors for Your Unilock Construction?
Unilock pavers are a premium product, but premium products still fail when the prep underneath is wrong. Show us an Unilock patio with rocking units in Morgan Hill, and in most cases what we find is a base layer that was never compacted correctly, or edge restraint that’s letting the outer row wander, or drainage that’s sending water under the field instead of away from it. None of that is the paver’s fault, and we say so plainly. Nate Burrell, our owner and general contractor, grew up in the Paradise Valley area of Morgan Hill and trained in construction technology at Gavilan College in Unilock repair in Gilroy before spending close to two decades on job sites across South Santa Clara County. He’s spent enough time cutting, setting, and resetting Unilock units on local hillside lots to know that the difference between a 20-year patio and a 4-year patio is almost always in the aggregate, not the paver.
We match that hands-on familiarity with a process that doesn’t cut corners on the boring parts. Our crews compact the base in lifts, set genuine Unilock edge restraints, and finish joints with polymeric sand at the right moisture to lock everything in. We’re a full-scope general contractor, which means when a Unilock project sits next to a failing retaining wall or a drainage problem at the roofline, we can fix all of it under one plan. Do it once, do it right – everything else is just a future repair bill.
Styles & brands we work with
Common Unilock Construction Problems We Fix in Morgan Hill
Unilock systems are engineered well, but Morgan Hill’s conditions put specific stress on them. Here’s what we actually see in the field, and what usually causes it:
- Heaved and uneven Cambridge Pavingstones after wet winters. Morgan Hill sits on expansive clay soils that swell when saturated and shrink when dry. If the base aggregate wasn’t compacted in lifts or the subgrade wasn’t properly prepared, the pavers ride the clay like a raft and come out of winter looking like a rumpled rug. We pull the affected field, re-grade, re-compact, and reset the units so they land flat and stay flat.
- Edge spalling and corner chipping on Brussels Block patios. Brussels Block is a tumbled, timeworn-look paver, but chipping at the perimeter isn’t part of the aesthetic. It almost always traces back to missing or failing edge restraint, which lets the outer course shift under foot traffic and vehicle loads. The fix is proper restraint, not just a fresh pack of pavers.
- White powder bloom on Cambridge and Brussels Block surfaces. Efflorescence – the chalky white deposit – happens when moisture wicks through the paver and carries soluble salts to the surface. It’s common in Morgan Hill when patio bases hold water against the underside of the paver. Cleaning the surface only treats a symptom; fixing the drainage and base ventilation is what actually stops the bloom from returning.
- Polymeric sand washout and weed-choked joints on sloped patios. Foothill lots east and west of the valley floor mean plenty of Morgan Hill patios are built on grade. If the sand in the joints washes out after a couple of storms, the pavers loosen, weeds take root, and the whole field starts to creep downhill. Proper sand installation, joint depth, and slope grading prevent this, and we re-sand and stabilize existing fields when the original installers cut corners.
- U-Cara Retaining Wall System leaning or bulging. U-Cara is a beautiful wall system, but it’s a structural element, not a decorative one. Bulging or leaning walls around Morgan Hill foothill properties usually mean inadequate drainage behind the wall or an insufficient buried course for the wall’s height. We rebuild with proper drainage stone, geogrid where the wall height calls for it, and properly embedded base units.
Unilock Parts & Our Repair-vs-Replace Approach
When we repair Unilock work, we use genuine Unilock edge restraints, polymeric sand, and matching units so the finished surface stays consistent in color, size, and texture. A Cambridge paver from a different batch year can read slightly off against the original field, so we’re careful about sourcing. For the structural layers – base rock, bedding sand, drainage aggregate – we source quality local material from Morgan Hill and Unilock repair in San Martin yards, because that’s where locally matched gradation matters more than branding.
Our repair-versus-replace stance is honest. If the pavers themselves are sound and the failure is in the base, the grading, or the edge restraint, we recommend correcting the base rather than replacing good stone. Tearing out and dumping a field of intact Unilock pavers to “start fresh” is a waste of your money, and we won’t pitch it. If the field is genuinely worn down beyond reclamation, we’ll tell you that too. If you’re unsure whether your Unilock surface is a repair job or a replacement job, call (833) 725-3508 and we’ll look at it with you.
Our Unilock Service Process – Step by Step
We run Unilock work on a disciplined sequence, because the order of operations is what separates a patio that lasts from one that doesn’t:
- 1
Site evaluation and diagnosis. We assess the existing base, drainage patterns, edge conditions, and the condition of the Unilock units themselves. We check for standing water, soft spots, and movement, and we explain what we’re seeing in plain terms.
- 2
Base correction or new base prep. For new installations, we excavate to the right depth for the load class, compact the subgrade, then build the aggregate base in lifts. For repairs, we remove failed sections, correct the subgrade and drainage, and re-compact before any paver goes back down.
- 3
Unit reset or installation. We lay the Unilock pavers – Cambridge, Brussels Block, Beacon Hill, or U-Cara – on the bedding layer with proper joints, making cuts clean and tight. Full-field repairs or new installs get the same standard of care.
- 4
Edge restraint and joint stabilization. Genuine Unilock edge restraint goes in along the entire perimeter and is spiked into compacted base. Joints are filled with polymeric sand, installed at the right moisture and swept to full depth, then activated so they lock the field.
- 5
Compaction, cleanup, and walkthrough. The completed field is plate-compacted, swept, and inspected. We walk the project with you, point out what was done and why, and confirm drainage and edge detail meet the site conditions.
See the difference
Before
After
Before
After
Before
AfterUnilock Products We Service & Install in Morgan Hill
Our crews work with the full range of Unilock systems that make sense for Morgan Hill residential projects: Cambridge Pavingstones in driveways and patios, Brussels Block for its aged texture and varied tones, Beacon Hill for larger-format flagstone and slab looks, and the U-Cara Retaining Wall System for terraced foothill lots and garden walls. We keep common joint widths, edge restraints, and polymeric sand on hand for repairs, and we source matching units directly for expansion and full-field work. If you have an existing Unilock surface with a specific color blend, we’ll match it before we recommend any layout change.
We Also Service These Brands
Unilock is one system we know deeply, but we’re not a single-brand shop. Brookside Contractors works across the full construction scope, and our clients also trust us with KraftMaid cabinetry, Cambria and Silestone countertops, Kohler fixtures, roofing, siding, windows, fencing, and ADUs. When your patio leads to a kitchen or an exterior refresh, the same crew can carry the project through.
FAQs – Unilock Construction Service in Morgan Hill
Yes, we can match your existing Cambridge Pavingstones by sourcing the same product line, size, and color blend, and we account for the fact that older units may have weathered slightly against brand-new stock. Matching is done by pulling from the same series and color designation, then laying in a way that blends old and new fields rather than creating an obvious seam. Call (833) 725-3508 if you’re planning a repair or expansion, and we’ll bring samples and match them on-site.
That white powder is efflorescence, a natural salt deposit that forms when moisture moves through the concrete paver and evaporates at the surface, leaving minerals behind. In Unilock in Seven Trees and Morgan Hill, it’s often a sign that water is lingering under the pavers due to base drainage that isn’t shedding water fast enough. Cleaning it off will clear the surface temporarily, but if we don’t correct the drainage under the field, it will come back in a season or two. Call (833) 725-3508 and we’ll assess whether it’s a cosmetic clean or a base problem.
We prevent shifting by addressing the subgrade and base before any paver goes down. That means excavating into the expansive clay and removing it to the design depth, compacting what remains, and building the aggregate base in lifts so it’s dense and stable before the bedding layer goes in. Edge restraint is then installed around the entire perimeter and spiked into the compacted base, not just staked into loose soil. On sloped foothill lots, we also grade for positive drainage so water never pools under the field. If your pavers are already shifting, call (833) 725-3508 for a base assessment.
Yes. For Unilock repairs and installations, we use genuine Unilock edge restraints and polymeric sand alongside matching Unilock units, so the repaired or new field stays consistent in dimension and color and the joints seal correctly. For the structural layers underneath – base rock, bedding sand, and drainage aggregate – we source quality aggregate locally from Morgan Hill area suppliers, because gradation and compaction matter more than a brand stamp on those materials.
We can, and we do. The process involves demolishing and removing the existing concrete, correcting the subgrade underneath – especially important on Morgan Hill’s clay soils – then compacting a proper aggregate base and laying the Unilock paver system with edge restraint and polymeric sand. Cambridge Pavingstones are a common choice for Morgan Hill driveways because they hold up well under vehicle loads when the base is built right. Typical paver driveway installation in Morgan Hill runs $7,000 to $18,000 depending on size, access, and base conditions. Call (833) 725-3508 for a free estimate and line-item pricing.
Paver driveway installation in Morgan Hill typically runs $7,000 to $18,000, paver patio installation $3,500 to $11,000, and driveway replacement with pavers $5,000 to $14,000. These ranges reflect labor, base prep, edge restraint, sand, and the Unilock units, and final pricing depends on square footage, access, slope, and the condition of the existing base:
| Unilock Service | Morgan Hill Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
For an exact quote on your Unilock project, call (833) 725-3508. Estimates are free, and we price line items so you know exactly what you’re paying for.
Book Your Unilock Service in Morgan Hill, CA
If your Unilock pavers are heaving, chipping, blooming, or sliding, or if you’re planning a new driveway, patio, or retaining wall, call Brookside Contractors at (833) 725-3508. We’ll walk the site with you, diagnose what’s actually going on, and give you a free estimate built on straight answers.
Written by Nate Burrell, Owner at Brookside Contractors, serving Morgan Hill since 1992.