Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Construction in Lompico, CA | Brookside Contractors
We install and service Cambria quartz countertops throughout Lompico, and the short answer is this: we’re an independent contractor, not a Cambria-authorized dealer, and the thing that makes our work here different is that we plan every slab delivery, seam, and template day around Lompico’s steep lots and narrow private roads. If you’re pricing a Cambria kitchen or island in the canyon, call (833) 725-3508 for a free estimate and a straight read on what your site will actually require.
Our crew has installed Cambria in Ben Lomond, Brookdale, and dozens of other Santa Cruz Mountains homes, from 1970s canyon cabins to custom builds, and we know how its non-porous surface and resin binders behave under Lompico’s heavy winter rain and summer wildfire heat. We’ve seen which edges, seams, and finishes hold up in this specific climate, and which don’t. That matters more here than it does in a tract subdivision.
Why Lompico Residents Choose Us for Cambria Service
Most countertop crews can template and install on a flat, accessible lot. Lompico is not that. We’ve spent enough days on Lompico Road and the private turnoffs above it to know that a standard slab truck often can’t make the turn, let alone back up a steep driveway. So we stage at the turnout, schedule a boom or smaller loads, and build the install plan around road access first. Nate Burrell, our owner and general contractor, trained in construction technology at Gavilan College and spent nearly two decades on job sites across South Santa Clara County before bringing that structural eye to kitchen work. When a Lompico cabin floor has deflected from decades of canyon moisture, we catch it before templating, not after the slab cracks.
We’re not a reseller pushing one brand. We install Cambria because it performs, but we match the material to the project. If a honed finish is going to sit in a sun-exposed Lompico kitchen with abrasive wildfire ash in the air, we’ll tell you that before you order.
Styles & brands we work with
Common Cambria Construction Problems We Solve in Lompico
- Thermal shock cracking at seams. Older Lompico cabins with single-pane windows and wood stoves create big temperature swings, cold winter drafts meeting a hot kitchen surface. That stress lands at the seam. We’ve repaired and replaced seams on Cambria Ella and Torquay installs where the original fabricator didn’t account for it.
- Edge chipping from tight deliveries. We see chipped island perimeters most often when a previous crew forced a full slab up a narrow private road instead of staging and booming it in. The 3cm edge is strong, but not against a railing or a tree trunk.
- Dulling and discoloration on honed finishes. Lompico sits in a wildland-urban-interface zone. Wildfire ash is alkaline and abrasive, and many homes are on wells with acidic water. Honed Cambria absorbs more of that wear than polished. We’ve seen the difference up close.
- Seam separation from ground movement. Steep lots and older owner-built homes mean floors move seasonally. If cabinets are anchored to an unlevel subfloor, the seam will open. We fix the floor before we set the slab.
- Scorch marks near wood stove clearances. Cambria is heat-resistant, not heat-proof. In Lompico kitchens where a wood stove is the primary heat source, we set clearances and recommend trivet placement at the perimeter seams.
Cambria Service in Lompico: What Local Conditions Mean for Your Equipment
Here’s the thing most generic Cambria pages won’t tell you. Lompico is an unincorporated canyon community where nearly every build or remodel is a wildland-urban-interface and slope project. Your countertop isn’t just a countertop, it’s a fire-hardened surface in a home on septic and well infrastructure, reachable by a road that a standard concrete or lumber truck often can’t take. Because Lompico’s narrow private roads and steep driveways off Lompico Road can’t take a standard delivery truck, Cambria slab deliveries must be planned as smaller loads with a crane or boom truck staged at Lompico Road. So we schedule template and install days around road closures and turnout availability, not just cabinet readiness. That changes the whole sequence of a remodel, and it’s why a crew that’s only ever worked flat lots will get it wrong here.
Cambria Models & Products We Service in Lompico
We work with the full Cambria line that makes sense for mountain kitchens: Cambria Ella, Torquay, Britannica, and Blackwood are the ones we install and repair most often in Lompico, along with Cambria in Brookdale and nearby communities. For seams, we use Cambria-approved adhesives and sealants, and we source slabs through regional distributors to match existing lots. For a chip or crack, we first assess whether color-matched epoxy can repair it. If the damage sits in a high-stress area, like an island perimeter or a seam over a cabinet joint, we’ll recommend replacing the piece rather than repeating the failure in two seasons. We keep the common color-match epoxies and sealants stocked locally so a Lompico repair doesn’t wait on a truck from San Jose.
See the difference
Before
After
Before
After
Before
AfterCambria Service Pricing in Lompico
The table below shows what to expect. These are the same ranges we quote across the region, and they assume the typical Lompico conditions: a home on a slope, an older subfloor, and some delivery constraint. Your exact number depends on slab size, edge profile, how much floor re-leveling we find, and whether the driveway needs a boom or a smaller staged load.
| Service | Typical Range |
|---|---|
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
| Cabinet Installation | $4,000 – $13,000 |
Every quote is free and written line-item. Call (833) 725-3508 and we’ll walk the site before we talk numbers.
Serving Lompico, CA — Our Local Coverage Area
We’re based in the Lompico area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Cambria Construction in Lompico
Yes, but not without floor work first. We re-level and reinforce the subfloor before templating, because Cambria slabs are heavy and inflexible, and a floor that deflects will transfer stress to the slab. That’s how seams open and corners chip. Call (833) 725-3508 for a free site assessment, we’ll tell you what your floor actually needs.
We stage at the nearest turnout that a truck can safely reach, then bring slabs up with a boom or in smaller loads. We schedule template and install days around road access and turnout availability, not just your cabinet schedule. If your driveway can’t take a full slab truck, we plan around it from day one.
Cambria is non-porous and adds a fire-resistant surface to your kitchen, which fits the Chapter 7A hardening approach a Lompico remodel should include. It’s not a standalone fireproofing solution, your roof, siding, vents, and decks all matter more. But as a countertop surface in a WUI kitchen, it’s a sound choice.
Countertop installation runs $2,000 to $6,500. A full island typically adds $3,000 to $10,000. Your number depends on slab size, edge profile, and how much access and floor prep the site requires. Call (833) 725-3508 for a free written quote, no rough numbers over the phone, we come look first.
Often yes, we repair chips with color-matched epoxy when the damage is cosmetic and low-stress, the same way we handle Cambria repair in Felton and surrounding areas. If the chip sits on an island perimeter or near a seam, we’ll recommend replacing the piece, because a repair in a high-stress area is just a future callback. Nate’s rule is do it once, do it right, everything else is just a future repair bill.
Service Areas Near Lompico
We serve Lompico and the surrounding Santa Cruz Mountains communities. That includes Felton, Ben Lomond, Zayante, and Brookdale, and we’re familiar with the access and slope patterns across all of them. For Cambria work in other areas, see our Cambria service in Twin Lakes and Cambria service in Pasatiempo pages. For a full picture of our reach, visit the Lompico service area page. And if you want to understand our broader Cambria work, start at Cambria sales & service.
Book Your Cambria Service in Lompico Today
If you’re planning Cambria in Mount Hermon, Lompico, or nearby, call (833) 725-3508. We’ll schedule a site walk, talk through what your driveway and subfloor will actually require, and give you a free written estimate. No showroom pressure, just a straight read on the job.
Written by Nate Burrell, Owner & General Contractor at Brookside Contractors, serving Lompico and the Santa Cruz Mountains.