Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Construction in Stanford, CA | Brookside Contractors
We’re an independent Toto service provider handling fixture installation, repair, and bathroom construction across Stanford’s 94305 ZIP. The thing that makes Toto work different here? Almost every project sits on university land in unincorporated Santa Clara County, so a simple toilet swap or tub-to-shower conversion runs through Stanford’s own design review alongside County permits, not a typical city building department. Our crews know that process cold. Call (833) 725-3508 for a free estimate.

Why Stanford Residents Choose Us for Toto Service
We’ve rebuilt and reset Toto fixtures across Stanford’s institutional and faculty-housing stock for years, from older Drake and Ultramax toilets to current Nexus and Washlet installations. That repetition matters. We know how these fixtures actually behave on Peninsula municipal water, in preserved buildings, and under university review requirements. Nate Burrell, our owner and general contractor, trained in construction technology at Gavilan College and has spent two decades on job sites across South Santa Clara County. He’s the one who set the rule we still work by: do it once, do it right – everything else is just a future repair bill. When we show up to a Stanford job, we’re not learning on your bathroom.
We’re also straightforward about what we are. Brookside Contractors is an independent service provider, not affiliated with, authorized by, or endorsed by Toto. We source OEM parts through normal distribution, which means we’re not locked into any dealer arrangement, and we can tell you honestly when a repair beats a replacement and when it doesn’t.
Styles & brands we work with







Common Toto Construction Problems We Solve in Stanford
Peninsula water, older buildings, and Stanford’s academic rhythms create a specific set of Toto failure patterns. Here’s what we see most:
- Fill and flush valve wear from mineral scaling. Peninsula municipal water carries enough mineral content to accelerate wear on Toto fill valves and flush valves. Drake and Ultramax tanks get weak or noisy refills, and the fix is an OEM valve, not a universal aftermarket part that runs louder and shorter. We keep the right valves on hand for quick Stanford turnaround.
- Wax ring and floor-seal failures in older faculty housing. Winter rains push moisture against unimproved subfloors in Main Quad-era and older faculty bathrooms. We’ve pulled more than a few Toto toilets off decayed wax rings with soft subfloor sections underneath. The repair isn’t just a new ring – you’re often looking at flange repair and subfloor replacement before the fixture goes back down.
- Washlet seat and control failures that owners assume mean full replacement. Dead heaters, errant sensors, clogged bidet nozzles – these failures live in the seat unit, not the toilet. A $200 Washlet seat component is almost always worth fixing on a Toto. We diagnose the actual failed part before anyone talks you into a whole new fixture.
- Skirted one-piece models with gasket failures in preserved buildings. Aquia IV and Nexus toilets are one-piece skirted designs. When the inlet or tank-to-bowl gasket fails, you’re pulling the entire fixture, and old rough-ins in Stanford’s preserved buildings rarely match the new setout cleanly. We handle the plumbing adaptation carefully, and we know what Stanford’s review process expects to see.
- Fixture relocations that trigger design review. Moving a Toto toilet or adding a bidet circuit in Stanford isn’t a simple city permit. It runs through Stanford’s own land-use and design review alongside County building permits, and preservation-sensitive buildings may require the fixture setout and venting to be fixed before that review closes. We prepare for that from the first site visit.
Toto Service in Stanford: What Local Conditions Mean for Your Equipment
Most Stanford construction work sits in ZIP 94305 on university land in unincorporated Santa Clara County, not in the City of Stanford. That’s a permitting reality that changes how a Toto bathroom remodel actually plays out. A homeowner looking for Toto in Palo Alto can file with a municipal building department and move on. In Stanford, a bathroom remodel that relocates a Toto toilet or adds a bidet circuit runs through Stanford’s own design review alongside County building permits, and preservation-sensitive buildings may require the fixture setout and venting to be fixed before that review closes. That means the Toto equipment you choose has to fit the existing rough-in cleanly, or the review stalls. We plan for that on day one. On a faculty-housing bathroom off the Main Quad area, our crew opened a wet wall to convert a tub to a shower and found the existing Toto Ultramax II sitting on a decayed wax ring with a soft subfloor section – winter moisture had been working at the seal for years. We replaced the subfloor and flange, re-set the Ultramax II on a new wax ring with OEM tank-to-bowl gasket and fill valve, and tied the new shower drain into the same reviewed rough-in so the preservation review stayed intact. That’s the kind of coordination Stanford work demands.
Toto Models & Products We Service in Stanford
We work across the Toto line Stanford actually installs and maintains: Drake and Drake II two-piece toilets, Ultramax II one-piece models, Nexus and Aquia IV skirted one-piece toilets, and Washlet and Washlet+ electronic bidet seats. Our parts approach is simple. We use OEM Toto fill valves, flush valves, gaskets, and Washlet components wherever they exist, because aftermarket parts run louder and shorter-lived in Toto tanks. Where a part is discontinued, we say so and find the closest OEM-compatible equivalent. For Stanford service, we stock the most common OEM fill valves, flush valves, wax rings, and tank-to-bowl gaskets locally so we’re not waiting on a parts run to get your bathroom back in service. We’re an independent provider, so our parts advice is about what actually works, not what a dealer arrangement pushes.
If you’re comparing fixtures for a remodel, you can also browse our Toto sales & service page for the full picture on what we install and why.
See the difference
Before
After
Before
After
Before
AfterToto Service Pricing in Stanford
Here’s what typical Toto-related bathroom construction runs in the Stanford market:
| Service | Typical Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the cost? The condition of the existing rough-in, whether Stanford’s design review requires fixture setout or venting fixes before approval, and whether we find subfloor or flange damage once the old fixture comes out. Your free estimate from us is a written line-item quote, so you see exactly what’s included. Call (833) 725-3508 to schedule one.
Serving Stanford, CA — Our Local Coverage Area
We’re based in the Stanford area and also handle Toto repair in Los Altos and nearby communities. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Toto Construction in Stanford
Yes, in ZIP 94305, almost every bathroom project runs through Stanford’s own land-use and design review alongside County building permits, and a toilet replacement that changes the fixture location or adds a bidet circuit will need that review. A straight swap on the same rough-in is usually simpler, but we always confirm the review scope before work begins. Call (833) 725-3508 and we’ll check your specific property.
Peninsula municipal water carries mineral content that accelerates wear on Toto fill valves, and Drakes in Stanford see this sooner than fixtures in areas like Los Altos Hills, where Toto service faces similar conditions. The fix is an OEM Toto fill valve, not a universal aftermarket part that runs louder and shorter in Toto tanks. We stock these and usually swap one out the same visit.
A dead heater, errant sensor, or clogged nozzle means the seat unit failed, not the toilet. A $200 Washlet seat component is almost always worth fixing on a Toto. Where we’d talk replacement instead: a cracked bowl or a dead Washlet board on a 15-year-old unit. We’ll give you an honest cost comparison before any work starts. Call (833) 725-3508 for an exact quote.
Yes, but it’s more than a straight swap. Aquia IV is a skirted one-piece design, so a failed inlet or tank-to-bowl gasket means pulling the whole fixture, and old rough-ins in preserved buildings rarely match the new setout cleanly. We adapt the plumbing carefully and prepare for Stanford’s preservation review expectations from the first visit.
Work on or near campus frequently has to be scheduled around move-in, commencement, and football game days, and exterior or wet-wall access can be limited during those windows. We plan remodel schedules around those dates from the start, so your bathroom isn’t torn apart the week of graduation. Estimates are free – call (833) 725-3508 to talk timing.
Service Areas Near Stanford
We serve Stanford and the surrounding South Bay and Peninsula communities. Our Toto service also reaches Toto service in Ladera and Toto service in Portola Valley, along with Morgan Hill, San Martin, and Gilroy. For the full coverage map, see our Stanford service area page.
Book Your Toto Service in Stanford Today
Whether it’s a fill valve, a tub-to-shower conversion, or a full bathroom remodel with a new Toto fixture, we’ll give you a straight answer and a written quote. Call (833) 725-3508 to schedule your free estimate, and we’ll handle the Stanford review process from start to final walkthrough.
Written by Nate Burrell, Owner at Brookside Contractors, serving Stanford since he first set foot on a South County job site.