Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Lexington Hills, CA | Brookside Contractors
Belgard paver driveways, patios, and retaining walls in Lexington Hills typically run $3,500 to $18,000, and the biggest variable is your site: steep slopes, narrow private roads, and Santa Cruz County’s WUI rules all shape the job. We’re Brookside Contractors, an independent Belgard service provider (not manufacturer-affiliated), working across Lexington Hills’ 95031 zip code and providing Belgard repair in Cambrian Park. Call (833) 725-3508 for a free estimate on any Belgard installation, from a paver driveway to a segmental retaining wall.
Why Lexington Hills Residents Choose Us for Belgard Service
Most contractors in this part of the Santa Cruz Mountains know how to lay pavers on a flat suburban lot. Lexington Hills is not that. Our crews have spent years working the steep, wooded parcels off Old Santa Cruz Highway, where a paver driveway has to hold up to storm runoff, delivery-truck loads, and freeze-thaw cycles that punish a weak base. We install Belgard sales & service systems with the slope engineering and drainage work those jobs actually need, not just the pretty top layer.
Nate Burrell, our owner and general contractor, grew up in the Paradise Valley area of Morgan Hill and trained in construction technology at Gavilan College before spending two decades on job sites across South Santa Clara County. His saying sums up how we build here: “Do it once, do it right, everything else is just a future repair bill.” We match the material to the project, and on a Lexington Hills hillside that means geogrid, compacted aggregate, and edge restraint, not just block and sand.
Styles & brands we work with
Common Belgard Construction Problems We Solve in Lexington Hills
We see the same failures repeat across this part of the Santa Cruz Mountains. Here’s what actually goes wrong and what we do about it:
- Bulging and creeping segmental walls on steep slopes. Mega Arbel and Anchor Highland Stone walls installed without geogrid or proper batter start leaning after one heavy winter. On Lexington Hills’ wooded hillsides, saturated soil pushes hard against the back of a wall, and the block moves. We rebuild the base, add geogrid, and re-set the batter so the wall drains and holds.
- Paver driveway edges failing on the final climb. When a driveway ends on a narrow private road off Old Santa Cruz Highway, the edge takes a beating from shuttled material loads and delivery trucks. If the base wasn’t compacted for that weight, the outside courses sink and spread. We over-excavate the edge, compact an aggregate base, and set proper edge restraint so the driveway stays square.
- Lafitt-style textured pavers trapping oak leaf tannin and moss. Shaded, wooded lots mean wet leaves sit on the paver surface for months. Lafitt Rustic Slab and similar textured pavers hold that organic material in their crevices, staining the surface and making joints slick. We clean, re-sand with polymeric joint sand, and adjust pitch so water carries debris off instead of letting it sit.
- Efflorescence and joint sand washout from bad drainage. On a hillside lot, pitching drainage toward the house instead of away from it is a slow disaster. Water runs through the joints, washes out the sand, and leaves white mineral streaks on the paver face. We re-pitch the base layer, reset the pavers, and re-sand the joints so water moves off the surface and away from the structure.
- Retaining wall base failure from bad engineering. Belgard block is durable; bad engineering is not. When a wall bulges because the base was never properly prepared, re-facing it just hides the problem for a season. We take the wall down, rebuild the base with compacted aggregate, and re-lay the courses, wall caps, and corner units so they lock up correctly.
Belgard Service in Lexington Hills: What Local Conditions Mean for Your Equipment
If you live on a private road off Old Santa Cruz Highway, you’ve probably watched a delivery truck give up halfway up the hill. That’s the defining reality of hardscape work in Lexington Hills. A concrete truck weighs roughly 70,000 pounds loaded, and many of these roads have tight switchbacks, low-hanging PG&E lines, and no turnaround at the top. The truck stops at the bottom, and the pour either happens where it can’t reach or not at all. That’s why Belgard paver driveways are often the practical choice here rather than a style preference: pavers arrive on pallets that a compact loader can shuttle up in small batches. We stage materials at the road base and bring them up as needed, which means the driveway gets built exactly where you want it, not where a mixer can reach. Combine that with Lexington Hills’ WUI rules, which push homeowners toward non-combustible hardscape around the structure, and paver driveways and patios start looking like the only sensible option on many lots. Call (833) 725-3508 and we’ll walk your site and tell you what’s actually buildable.
Belgard Models & Products We Service in Lexington Hills
We install and service Belgard’s full hardscape catalog, from Lafitt Rustic Slab pavers for driveways and walkways to Mega Arbel and Anchor Highland Stone retaining wall systems. On the patio side, we regularly work with Catalina and Urbana Stone lines, and we build walls with Bristol Valley and Weston Stone block when the project calls for a split-face or tumbled look. Our parts approach is simple: we use Belgard’s own matching wall caps, corner units, and polymeric joint sand so course lines, colors, and locking profiles stay true. For slope retention on steep Lexington Hills lots, we lean on quality aftermarket geogrid and base aggregate where it outperforms the stock option. When a wall is bulging from a bad base, we rebuild the base rather than re-facing it. Belgard units hold up; no block survives bad engineering.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Lexington Hills
Here’s what Belgard work costs in the Lexington Hills market, with the caveat that your site conditions are the biggest variable:
| Project | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Home Addition (with Belgard hardscape tied in) | $45,000 – $130,000 |
What drives the number? Slope, access, base depth, and whether we’re pulling a permit through Santa Cruz County for walls over three feet or significant grading. A flat patio on a level lot is a different job than a paver driveway on a 15% grade with a private-road shuttle. Your free estimate includes a site walk, measurements, and a written line-item quote, whether you’re in Lexington Hills or need Belgard repair in Scotts Valley. Call (833) 725-3508 and we’ll give you real numbers before you commit to anything.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well, and we also offer Los Gatos Belgard service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Lexington Hills
Yes, and steep lots are exactly where Belgard’s segmental wall systems earn their keep. The difference between a wall that holds and one that creeps is the base and geogrid, not the block itself. We excavate to a compacted aggregate base, install geogrid where the slope demands it, and set the wall with proper batter so water drains through and not against the block. Most Lexington Hills hillside walls over three feet need a Santa Cruz County permit. Call (833) 725-3508 and we’ll tell you what your specific lot requires.
Concrete trucks weigh too much to navigate many private roads off Old Santa Cruz Highway. If the truck can’t reach the pour, you either build a driveway where you don’t want it or you pay for a pump truck and still fight the access. Paver pallets come up in small loads on a compact loader. The driveway gets built exactly where you want it, and the result handles the same loads. Call (833) 725-3508 and we’ll assess your access before you plan around a pour that can’t happen.
Yes. Lexington Hills sits in a high-fire-hazard zone, and Santa Cruz County enforces WUI standards on new builds, additions, and significant remodel work. Hardscape directly against or near the structure is actually a fire-smart choice: non-combustible pavers and walls create a defensible zone where embers can’t ignite. We spec pavers and segmental walls with that in mind, including ember-resistant drainage details where the county wants them. Call (833) 725-3508 and we’ll make sure your Belgard work doesn’t create a code problem.
Shade and leaf litter are the culprits, and Lexington Hills has both in abundance. The fix is a combination of surface choice, pitch, and joint sand. On shaded lots, we’ll steer you toward pavers with less surface texture than Lafitt Rustic Slab if moss is a known problem, and we’ll re-pitch the base so water sheets off instead of pooling. Polymeric joint sand keeps joints from turning into moss beds. Call (833) 725-3508 if your patio or driveway has gone slick under the oaks, we’ll fix the pitch and surface.
Mega Arbel is a large-format segmental retaining wall block built for structural height and slope retention. Bristol Valley is a smaller, split-face wall block designed for garden walls and landscape tiers. The choice depends on your grade: a steep Lexington Hills slope needs Mega Arbel or Anchor Highland with geogrid; a low planter wall works fine with Bristol Valley or Weston Stone. Call (833) 725-3508 for a site walk and we’ll match the wall to the slope, not the catalog photo.
Service Areas Near Lexington Hills
We provide Belgard installation and repair throughout South Santa Clara County and the Santa Cruz Mountains. That includes Lexington Hills, Morgan Hill, San Martin, Gilroy, and the smaller mountain communities like Corralitos and Day Valley. For neighbors closer to the coast, we also handle Belgard service in La Selva Beach and Belgard service in Seacliff. If you’re in the Lexington Hills service area or nearby, call and we’ll confirm coverage.
Book Your Belgard Service in Lexington Hills Today
We build Belgard hardscape systems that hold up on steep, wooded lots where other installations fail. If you’re planning a paver driveway, patio, or retaining wall in Lexington Hills, or need Belgard service in Monte Sereno, call (833) 725-3508 to schedule a free estimate. Nate Burrell and the Brookside Contractors team will walk your site, assess your access, and give you a written quote with real numbers. Do it once, do it right.
Written by Nate Burrell, Owner at Brookside Contractors, serving Lexington Hills and the greater Santa Cruz Mountains.