Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Aptos Hills-Larkin Valley, CA | Brookside Contractors
We provide independent CGI fiber-cement siding, fascia, and trim service across Aptos Hills-Larkin Valley, from full re-siding on custom ranch-era homes to fascia and soffit repair on redwood-shaded ridges. What makes our CGI work different here is that we build for fog drip, redwood duff, and long private drives that flatland crews never have to account for. If your CGI siding is blistering, chalked, or pulling loose, we know exactly why it failed on your specific parcel, and we fix it so it holds. Call (833) 725-3508 for a free estimate on any CGI job.
Why Aptos Hills-Larkin Valley Residents Choose Us for CGI Service
Nate Burrell, our owner and general contractor, grew up in the Paradise Valley area of Morgan Hill, where he got a hammer in his hand before he could drive and later trained in construction technology at Gavilan College in Gilroy. He has spent the better part of two decades running jobs throughout South Santa Clara County, including the unincorporated Santa Cruz County hill country. That local experience matters because CGI service in Aptos Hills-Larkin Valley means understanding how fiber-cement products fail differently on a north-facing, redwood-shaded ridge off a narrow private road than on a sunny flatland lot.
Our CGI sales & service work covers everything from fresh fiber-cement lap siding with a cedar-look profile to prefinished fascia and soffit panels, embossed woodgrain trim boards, and corner and starter trim accessories. Because we’re an independent contractor, not tied to a single manufacturer, we match the material to the project and the site. If your wall assembly calls for genuine CGI board, we use it. If a repair calls for an equivalent quality composite that will hold up better on a damp exposure, we tell you that honestly. Our Aptos Hills-Larkin Valley service area coverage means we understand the county fire-access rules, the rot patterns, and the staging constraints before we ever put a board on your wall.
Styles & brands we work with
Common CGI Construction Problems We Solve in Aptos Hills-Larkin Valley
- Bottom-course siding swelling and chalking. CGI fiber-cement lap siding installed tight to grade or deck ledges wicks moisture from fog drip and winter rain. The bottom courses swell, chalk, and the paint blisters. We see this constantly on damp north-facing redwood ridge walls, and the fix is re-flashing, trimming the board clear of grade, and back-priming before reinstallation.
- Prefinished fascia and trim cracked at the drip edge. CGI fascia and trim nailed without proper clearance behind roof drip edges traps water. Board ends go soft and cracked where winter rain runs off redwood-timbered roof lines. We rebuild the drip edge, add proper flashing, and reset fascia with stainless fasteners.
- Rot behind field board at windows and deck connections. Siding butted to wood-framed windows and redwood decks without a drainage plane or back-priming paints poorly and grows rot behind the field board. This is common on 1970s – 90s builds in Aptos Hills-Larkin Valley with original wood siding and redwood decking.
- Fascia blow-off and cracking on sloped, wind-exposed sites. Wrong fasteners or overdriven nails in fiber-cement on sloped, wind-exposed sites cause cracking and blow-off of fascia panels during dry-wind events. We re-secure with correctly installed fasteners rated for fiber-cement.
- Staging failures during roof and siding rebuilds. Long private driveways and steep wooded lots mean material trucks, cranes, and pump trucks often can’t reach the build. We stage CGI bundles at the road and shuttle them up without blocking the county fire-access turnaround.
CGI Service in Aptos Hills-Larkin Valley: What Local Conditions Mean for Your Equipment
The single biggest thing that separates CGI repair in Rio Del Mar and Aptos Hills-Larkin Valley from CGI work anywhere else is logistics and moisture acting together. Most developed parcels sit off long, narrow private drives that wind through redwood timber, and the county’s Wildland-Urban Interface rules require a fire-access turnaround at the end of the drive. That turnaround is not optional, and it cannot be blocked by a flatbed or a crane. So a fiber-cement re-side up here does not start at the house. It starts at the road, with bundles staged in a spot that keeps the fire turnaround clear, then shuttled up in smaller loads. Flatland contractors routinely underestimate this, park the delivery truck where the turnaround has to stay open, and then get told to move mid-job by a County fire inspector. We plan the staging before the material order goes in. On top of that, the marine-influenced coastal-range climate keeps wood siding, decks, and roofs chronically damp, while summer dry winds and surrounding wildland fuels make fire-resistant construction and defensible-space clearing a year-round expectation. CGI fiber-cement is a natural fit for the fire-hardening side of that equation, but only if it’s installed with drainage, clearance, and the right flashing for the wet side of it.
CGI Models & Products We Service in Aptos Hills-Larkin Valley
We work on the full CGI fiber-cement exterior lineup: cedar-look lap siding, prefinished fascia and soffit panels, embossed woodgrain trim boards, and corner and starter trim accessories. For repairs and small remodels, we stock common CGI profiles and trim for quick turnaround, and we’re comfortable pairing genuine CGI board with equivalent quality fiber-cement or composite components when lead times or exposure conditions call for it. On undamaged CGI siding we repair and re-flash rather than tearing off a whole elevation. When rot has reached the sheathing behind the field board, we tell you straight that replacement is the cheaper long-run path. Your project, your brands, matched to the parcel.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Aptos Hills-Larkin Valley
What drives cost on CGI work in Aptos Hills-Larkin Valley is access, not just square footage. A simple fascia repair on a house with a short, clear drive costs at the low end of the range. A full re-side on a redwood-shaded lot with a three-hundred-foot private drive and road-side staging costs more because of the labor and shuttle time. A free estimate from us includes a walkthrough of the wall assembly, the drive access, and the staging plan.
| Service | Typical Price Range |
|---|---|
| Roof Repair | $400 – $1800 |
| Roof Replacement | $8000 – $20000 |
| Metal Roof Installation | $15000 – $40000 |
| Home Addition | $45000 – $130000 |
Every estimate is written, line-itemed, and confirmed before work starts. Call (833) 725-3508 to schedule yours.
Serving Aptos Hills-Larkin Valley, CA — Our Local Coverage Area
We’re based in the Aptos Hills-Larkin Valley area and know this community well, and we also handle CGI repair in La Selva Beach. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Aptos Hills-Larkin Valley
Yes. We stage material deliveries at the road where the private drive can’t take a full flatbed, keep the county fire-access turnaround clear, and shuttle bundles up to the build in smaller loads. It adds labor, but it’s the difference between a smooth inspection and a stop-work order. Call (833) 725-3508 and we’ll walk your drive before we quote.
Fog drip and redwood shade keep that wall damp for half the year, and CGI fiber-cement installed tight to grade or deck ledges wicks that moisture up into the bottom courses. The board swells, chalks, and the paint blisters. The fix is clearance from grade, proper flashing, and back-priming before reinstallation. If the rot has reached the sheathing, we’ll tell you honestly that replacement beats repair. Call (833) 725-3508 for an evaluation.
Yes. CGI fiber-cement is non-combustible and holds up well under the fire-hardening requirements of Santa Cruz County’s Wildland-Urban Interface rules. The key is installation: proper clearances, drainage, and flashing so the wet side of the climate doesn’t rot the wall assembly behind the fire-resistant board.
Roof replacement on a wooded Aptos Hills-Larkin Valley parcel typically runs $8,000 – $20,000, with metal roof installation at $15,000 – $40,000 depending on access, staging, and the condition of the roof deck. Call (833) 725-3508 for an exact quote.
No. We’re an independent general contractor, not a CGI-authorized dealer or installer. We use genuine CGI fiber-cement board and trim where it’s specified for the wall assembly, but we can also switch to an equivalent quality product for a repair when lead times or exposure conditions call for it. Independence means we match the material to the job, not the job to a supplier.
Service Areas Near Aptos Hills-Larkin Valley
We run CGI jobs throughout the unincorporated hill country and the surrounding South County corridors. Our CGI service in Communications Hill work covers the newer hillside builds, and our CGI service in Watsonville work covers flatland and coastal projects. We also cover Morgan Hill, Corralitos, Day Valley, and Interlaken for CGI siding, fascia, and trim work.
Book Your CGI Service in Aptos Hills-Larkin Valley Today
If your CGI siding, fascia, or trim is failing on a fog-drip wall or a redwood-shaded roof edge, call (833) 725-3508 for a free estimate. We’ll walk the wall, check the drive, and give you a straight answer on repair versus replacement. Do it once, do it right, everything else is just a future repair bill.
Written by Nate Burrell, Owner at Brookside Contractors, serving Aptos Hills-Larkin Valley and the surrounding South County hill country.