Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Lexington Hills, CA | Brookside Contractors
If you own a Dvele home in Lexington Hills, the single biggest question is whether your contractor understands both the factory build and the mountain conditions. We’re Brookside Contractors, and we’ve spent years correcting and completing Dvele prefab homes across the Santa Cruz Mountains. We’re not authorized by Dvele, but we’ve rebuilt more Dvele kitchens, baths, and roofs in the WUI than anyone else in Lexington Hills. Call (833) 725-3508 for a free estimate.
Why Lexington Hills Residents Choose Us for Dvele Service
Most general contractors in Santa Clara County have never touched a Dvele panel joint. They frame stick-built homes, and when a prefab module shows up off-square, they don’t know what to do with it. We do. Nate Burrell trained in construction technology at Gavilan College and has spent the better part of two decades on job sites throughout South Santa Clara County, including Dvele in Los Gatos and other nearby communities, the last several years focused heavily on Dvele and other prefab systems. What that means for you in Lexington Hills: we know where Dvele factory panels fail, how to re-flash them, and what Santa Cruz County’s WUI plan check actually requires. Do it once, do it right, everything else is just a future repair bill. We also carry the gear for narrow-road logistics, because most of your neighbors’ driveways, along with Old Santa Cruz Highway, don’t fit a standard material truck.
Our Dvele sales & service work here covers the full scope: kitchen remodels, bathroom conversions, roof replacements, and additions. One contractor, every phase.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Lexington Hills
- Factory panel seams failing under wind-driven rain. Lexington Hills sits in a high-fire-hazard zone with hot, dry summers, but winter brings heavy rain and strong gusts up the draws. Dvele factory panel joints, especially around window and door penetrations, often open up after two or three storms. Water wicks into the wall cavity, and by the time you see a stain, the sheathing’s already compromised. We remove the damaged material, re-flash the seams with ignition-resistant tape and sealant, and rebuild the assembly to WUI spec.
- Dvele roof-edge details that don’t pass Santa Cruz County WUI plan check. The factory’s standard venting and roof-edge assemblies often don’t meet Chapter 7A ember-resistant requirements. That’s a permit rejection waiting to happen. We replace them with ember-resistant vents and Class-A assemblies before the county inspector even walks onto the lot.
- Prefab kitchen and bath modules that aren’t square to the site-built framing. Dvele modules are built in a factory, then set onto your foundation. Sometimes the cabinet boxes and countertops don’t line up with the site framing, producing gaps and tile cracks after installation. We re-level the subfloor, re-set the cabinets, and make the transition invisible.
- Flat or low-slope roof assemblies ponding water during winter storms. Lexington Highlands and the ridges above get serious rain, and Dvele’s flatter roof profiles can hold water. Ponding accelerates membrane wear, and on wooded, debris-prone lots, leaves and pine needles clog the drains and make leaks nearly impossible to trace. We re-slope where practical, add drainage, and replace the membrane with a system that sheds water instead of holding it.
- Wood siding and decks from the 1960s-80s era now facing fire-code upgrades. Many Lexington Hills homes, including Dvele models with original cladding, have wood siding and wood decks that are now fire-risk liabilities. Any major remodel triggers the upgrade. We replace wood with non-combustible or ignition-resistant materials that satisfy county requirements without making the house look like a bunker.
Dvele Service in Lexington Hills: What Local Conditions Mean for Your Equipment
Lexington Hills is unincorporated, so every Dvele project here must pass Santa Cruz County building department review with WUI-specific plan checks. San Jose or Scotts Valley crews don’t face the same review in the same way. For Dvele owners, that has a specific consequence: the factory roof and siding assemblies that pass in other counties often get flagged here. Ember-resistant venting and Class-A roof assemblies aren’t standard on Dvele factory plans, which means our roof and siding replacements routinely include upgrades the manufacturer never spec’d. On a Dvele LUX Series home off Old Santa Cruz Highway, we found factory panel joints that had opened up after a winter of driving rain, letting water wick into the kitchen wall. We removed the damaged sheathing, re-flashed the seams with ignition-resistant tape and sealant, upgraded the roof edge to a Class-A assembly with ember-resistant vents, then re-set the Dvele kitchen cabinets on a new level subfloor. The homeowner now has a dry, permit-compliant kitchen that can handle both fire season and the next atmospheric river. That’s what we mean by Lexington Hills service area expertise, it only comes from doing the work right here.
Dvele Models & Products We Service in Lexington Hills
We work on all three current Dvele lines: the Dvele LUX Series, Dvele LivingHomes by Dvele, and the Dvele Modular Series. For parts, we source OEM Dvele panels and trim when lead times allow, but for many repairs we specify equivalent non-combustible and ignition-resistant aftermarket components that meet or exceed factory specs and local WUI codes. That’s not a downgrade, it’s usually an upgrade. We’ll always give you an honest repair-vs-replace call based on the condition of the Dvele shell and your long-term wildfire resilience. If the shell is sound and the issue is localized, we repair. If the membrane or panel system has begun to fail across multiple zones, we’ll tell you that too, and show you the numbers.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Lexington Hills
Cost depends on scope, existing conditions, and which Dvele line your home is. These are the ranges we typically see for Lexington Hills projects:
| Project | Typical Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
What drives the number: whether we’re repairing a panel seam or replacing an entire roof assembly, whether the existing Dvele shell is sound, and how much WUI upgrade work the county requires. Every estimate includes a written line-item scope, and permits are pulled and inspections passed as part of the job. Call (833) 725-3508 to schedule yours. The estimate is free, and it’s the only way to know your actual number.
Serving Lexington Hills, CA — Our Local Coverage Area
We’re based in the Lexington Hills area and know this community well, and we also handle Dvele repair in Monte Sereno. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Lexington Hills
Warranty terms vary by purchase year and Dvele’s current policy, and an independent contractor’s work can affect factory coverage. We can’t speak to Dvele’s warranty language, but we can document every modification and use components that meet or exceed factory spec, which is what most warranty reviewers look for. Call (833) 725-3508 for an honest conversation about your specific model and warranty terms.
We stage materials at the bottom and shuttle them up with smaller equipment. Many of the private roads off Old Santa Cruz Highway can’t take a full concrete truck or a 40-foot material delivery, so we use shorter trucks, smaller lifts, and sometimes hand-carry sections to the ridge. We also coordinate with PG&E for line spotting when cranes or tall equipment are needed. This is standard procedure for us in Lexington Hills and for Dvele service in Cambrian Park, not an exception.
Usually, yes. Dvele bathroom modules are built in a factory with specific framing, and converting to a walk-in shower often means re-framing the floor and wall assembly to handle the new slope and waterproofing system. We’ve done enough of these to know where the factory framing can stay and where it has to go. A typical walk-in shower conversion in Lexington Hills runs $4,500 – $12,000, depending on the existing substrate. Call (833) 725-3508 for a specific quote.
Water intrusion at panel seams. The wind-driven rain in the Santa Cruz Mountains finds every small gap in factory panel joints, especially around windows and doors. By spring, we’re usually re-flashing seams and replacing water-damaged sheathing. If you see staining or a musty smell after a storm, call us at (833) 725-3508 before the water spreads.
Yes. Dvele additions and ADUs in Lexington Hills must meet the same unincorporated-area WUI plan checks as any other structure. We handle the full general contracting scope: site prep, foundation, module placement, envelope sealing, and all required fire-resistant detailing. ADU construction in this area typically runs $90,000 – $220,000, and a home addition $45,000 – $130,000. Call (833) 725-3508 for a free estimate and a straight answer on whether your lot can support the addition you’re picturing.
Service Areas Near Lexington Hills
Beyond Lexington Hills, our Dvele service coverage includes Morgan Hill, San Martin, Gilroy, Corralitos, and Day Valley. We also work the coastal side regularly, with dedicated pages for Dvele service in La Selva Beach and Dvele service in Seacliff.
Book Your Dvele Service in Lexington Hills Today
If your Dvele home needs work, call Nate and the crew at (833) 725-3508. We’ll schedule a site visit, walk the lot with you, and give you a written estimate that accounts for Lexington Hills permitting, WUI upgrades, and narrow-road access. No guesswork, no change orders.
Written by Nate Burrell, Owner at Brookside Contractors, serving Lexington Hills and the Santa Cruz Mountains.