Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Construction in Half Moon Bay, CA | Brookside Contractors
We provide independent ES Windows installation, repair, and re-flashing across Half Moon Bay, from older single-family homes off Main Street to newer custom builds and equestrian properties further inland, and we also offer our El Granada ES Windows service to neighboring coastal communities. The defining difference here is the salt fog. Half Moon Bay sits in a coastal marine belt where exterior aluminum corrodes, sealant joints break down early, and window flashing takes a beating that inland Bay Area contractors never have to engineer for. If your ES Windows are fogging, sticking, or leaking, call (833) 725-3508 and we’ll come take a look.

Why Half Moon Bay Residents Choose Us for ES Windows Service
Nate Burrell, our owner and General Contractor in Half Moon Bay, grew up around construction in South Santa Clara County and trained in construction technology at Gavilan College before spending close to two decades on job sites across the region. He’s built a crew that handles structural work, finish carpentry, and window replacement under one roof, which matters when a corroded ES Windows unit has also compromised the rough opening behind it.
We don’t just swap sashes. We open the wall, assess what the salt air did to the framing, and then decide with you whether a repair or a full replacement with proper marine detailing is the honest call. That’s the kind of thing you learn only by doing the work in Half Moon Bay, not by reading a product spec sheet. We’re an independent contractor, not a manufacturer affiliate, so when we tell you a window is worth saving or worth replacing, that recommendation isn’t filtered through a factory rep’s quota.
Our approach to ES Windows sales & service is rooted in what we see on actual Half Moon Bay walls, not what looks good in a catalog.
Styles & brands we work with







Common ES Windows Construction Problems We Solve in Half Moon Bay
- Perimeter seal and flashing failure. Salt-laden fog keeps exterior surfaces damp for hours every morning, and that continuous moisture attacks caulk joints and sill pans long before the glass itself fails. Water finds its way into the rough opening, the frame starts to move, and suddenly a five-year-old window looks fifteen years old. We re-flash and reseal with marine-grade materials that hold up to what the coast actually delivers.
- Corrosion of aluminum frames, fasteners, and hardware. ES Windows aluminum sliders are common in older Half Moon Bay coastal installs, and their slides and locks seize as salt air eats through the hardware. Weep-hole hardware rusts out, tracks bind, and eventually the window doesn’t open at all. We replace corroded components with OEM-equivalent parts or upgrade to stainless marine-grade hardware when the original spec wasn’t built for this climate.
- Fogged or failed insulated glass units. Half Moon Bay’s humidity swings between fog-soaked mornings and warmer afternoons put constant pressure on IGU seals. Once the seal breaches, condensation gets between the panes and the unit is done. We source replacement ES Windows glass units and install them with new glazing and seals rated for marine condensation cycles.
- Frames racking out of square on aging wood-framed homes. Many Half Moon Bay homes were built mid-century or earlier, with redwood siding and framing that’s been moving with moisture for decades. When that framing shifts, sashes bind and slider tracks misalign. We re-check square on the framing itself before setting new ES Windows, because a plumb window in a racked opening doesn’t stay plumb for long.
- Water intrusion at patio door combinations. ES Windows picture window and patio door combinations are beautiful, but the joint between fixed glass and sliding door is a weak point in coastal wind-driven rain. We’ve rebuilt that threshold detail on enough Half Moon Bay homes to know the drainage has to be designed for sideways moisture, not just what falls straight down.
ES Windows Service in Half Moon Bay: What Local Conditions Mean for Your Equipment
Half Moon Bay’s coastal commission and floodplain review layers add permitting scrutiny that simply doesn’t exist in neighboring inland towns, and they exist for a reason. Standard galvanized nails and untreated lumber that pass inspection in Burlingame or Hillsborough fail prematurely on these coastal walls. Salt fog accelerates galvanic corrosion between dissimilar metals, which is exactly what happens when a steel fastener meets an aluminum ES Windows frame. Within a few years, the fastener rusts, the frame pits, and the waterproofing fails from the inside out.
On an older redwood-sided home off Main Street in Half Moon Bay, our crew opened up a failing ES Windows slider and found the aluminum sill and fasteners corroded and the rough opening soft from years of marine-layer moisture. We replaced it with a properly flashed ES unit, marine-grade flashing and stainless fasteners, and new sill pan drainage tied into the wall, then re-checked square on the aged framing before setting the window and sealing the perimeter. That’s what a Half Moon Bay window replacement actually involves. If a contractor quotes you a number without mentioning flashings, fasteners, or the rough opening behind the window, they aren’t quoting what your house needs.
ES Windows Models & Products We Service in Half Moon Bay
We work on the full range of ES Windows lines installed across Half Moon Bay and nearby areas, including ES Windows in Moss Beach: vinyl single-hung and slider replacement units, aluminum-frame horizontal sliders from older coastal installs, casement and awning series, and picture/fixed window and patio door combinations. For parts, we match ES Windows glass units, sashes, and hardware with OEM-equivalent components where they’re available, and we use marine-grade aftermarket hardware and flashing when an OEM piece is discontinued or underbuilt for salt exposure. We keep common replacement hardware and flashing materials on hand for faster turnaround on Half Moon Bay jobs, which means less time with a tarp over your opening.
You can learn more about the broader scope of our work across Half Moon Bay service area.
See the difference
Before
After
Before
After
Before
AfterES Windows Service Pricing in Half Moon Bay
Window pricing is driven by what we find when we open the wall. A straightforward replacement where the rough opening is sound costs less than a job where the framing needs marine-grade remediation before the new unit goes in. Here are the ranges we work within for Half Moon Bay projects:
| Service | Price Range |
|---|---|
| Window Replacement | $4500 – $15000 |
| Impact Window Installation | $8000 – $25000 |
| Roof Repair (often needed alongside coastal window work) | $400 – $1800 |
The free estimate includes opening the suspected window, checking the rough opening condition, and giving you a written line-item quote with no change orders after work starts. Call (833) 725-3508 to schedule yours.
Serving Half Moon Bay, CA — Our Local Coverage Area
We’re based in the Half Moon Bay area and know this community well, and we also provide our Montara ES Windows service just up the coast. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – ES Windows Construction in Half Moon Bay
The daily marine-layer cycle in Half Moon Bay keeps glass surfaces constantly transitioning between cool fog and warmer sun, which stresses IGU seals and causes condensation between panes once a seal breaches. Sticking comes from aluminum track oxidation from salt air. Replacement glass units and hardware upgrades solve both.
Many Half Moon Bay window projects do require coastal commission or floodplain review depending on your specific lot and proximity to the water. We handle the permits and inspections as part of the job. Call (833) 725-3508 and we’ll check your property against current requirements before any work begins.
Sometimes. If corrosion is limited to hardware and surface pitting with the rough opening dry and solid, we repair with marine-grade hardware and re-flash. If the structural frame is compromised or the opening behind it has rot, repair is a stopgap and replacement is the durable fix. We’ll show you what we found and let the evidence guide the decision.
We use stainless steel fasteners and marine-grade flexible flashing on every Half Moon Bay exterior window job. Standard galvanized materials don’t hold up against salt fog, so we don’t use them near the coast. Sill pan drainage gets tied into the wall system so any water that does get in has a path back out.
Patio door tracks and rollers take the brunt of it. Salt deposits build up in the track, rollers corrode, and the door starts dragging or binding. We replace rollers and hardware with marine-grade parts, and we check the threshold flashing because that’s where sideways coastal rain finds its way in. For an exact quote on your door, call (833) 725-3508.
Service Areas Near Half Moon Bay
We also serve homeowners in Morgan Hill, San Martin, Gilroy, Corralitos, Interlaken, and Day Valley through our broader Bay Area coverage. Each area has its own microclimate, but none of them bring what Highway 92 and the Pacific dish out on a foggy morning. We stay familiar with ES Windows service in Burlingame and ES Windows service in Hillsborough as well, so if your project spans multiple properties or you know someone on the Peninsula side, we can coordinate.
Book Your ES Windows Service in Half Moon Bay Today
Do it once, do it right, everything else is just a future repair bill. That’s how Nate Burrell and our crew approach every window job on the Half Moon Bay coast. Call (833) 725-3508 to schedule your free ES Windows estimate and let us show you what’s really going on behind your window trim.
Written by Nate Burrell, Owner and General Contractor at Brookside Contractors, serving Half Moon Bay and the surrounding Bay Area.