Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Day Valley, CA | Brookside Contractors
We provide independent Jerith fence, railing, and gate service across Day Valley, CA, and the one thing that sets our work apart here is that we build for steep, wet, fire-prone hillsides, not flat suburban lots. If you own a Jerith aluminum or vinyl system in Day Valley, you’re dealing with footing movement, WUI code reviews, and County permitting that flatland contractors never see. Call (833) 725-3508 for a free estimate on repair, replacement, or new installation.
We’re an independent contractor. We are not authorized, sponsored, or endorsed by Jerith. What we are is deeply familiar with their product line, their failure points on mountain terrain, and what Santa Cruz County will require before we dig the first post hole.
Why Day Valley Residents Choose Us for Jerith Service
Nate Burrell grew up in the Paradise Valley area of Morgan Hill watching neighborhoods get framed up around him, and he’s spent the better part of two decades on South Santa Clara County job sites. That background matters when your Jerith fence is racking on a hillside off Day Valley Road, because the fix isn’t in a manufacturer’s catalog. It’s in the footing depth, the slope drainage, and the way water moves through decomposed granite after a wet winter.
Day Valley homeowners call us because we stock genuine Jerith replacement posts, caps, brackets, and pickets for current production lines, and we match quality aftermarket components where OEM parts are discontinued. We also know when a repair is throwing good money after bad. A racked run with creeping downhill footings isn’t a hinge adjustment. It’s a footing reset. We’ll tell you that on the first visit, not the third callback.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Day Valley
- Footing shift on steep, rocky hillside soils. Heavy winter rain saturates the decomposed granite and clay common to Day Valley parcels, and post footings creep downhill. That racks aluminum panels, pops pickets out of their sockets, and drags gate latches out of alignment. We reset posts on deeper concrete footings and re-level the run so it stays square.
- Vinyl panel brittleness and yellowing under mountain sun. Day Valley gets strong UV exposure, and west-facing vinyl runs take the worst of it. Over time, panels turn brittle and crack at the rail-to-post notch where wind load concentrates. We replace those sections with color-matched material and reinforce the notch before reinstalling.
- Powder-coat chalking and pitting on coastal-fog runs. Aluminum fence runs on the western and northern slopes of Day Valley sit in fog and runoff for months at a time. The powder-coat finish chalks and pits, especially along the bottom rail where moisture wicks behind the paint. We strip, prep, and recoat those runs before the aluminum itself starts to corrode.
- Wildfire ember and defensible-space damage. Day Valley sits in a high fire-hazard severity zone, and defensible-space clearing means vegetation gets cut back hard against fence lines. Ember exposure and brush clearing routinely damage vinyl sections and force replacement with noncombustible aluminum near the home. We handle that transition with County WUI compliance in mind.
- Gate dragging after a wet winter. The most common call we get in Day Valley between January and April is a Jerith gate that won’t swing clean. It’s almost always the same story: the downhill post moved, not the hinges. We reset the post, replace bent hinges with genuine Jerith parts, and re-hang the gate so it clears through another rainy season.
Jerith Service in Day Valley: What Local Conditions Mean for Your Equipment
Because Day Valley sits in a high fire-hazard severity zone, fencing within the defensible-space envelope around a home is often reviewed under Chapter 7A wildland-urban-interface building standards alongside the standard Santa Cruz County building permit. This is the single biggest difference between servicing a Jerith fence here versus flatland Aptos Jerith repair or Watsonville. Chapter 7A means ember-resistant vents, ignition-resistant siding and decking, and, for fencing, a hard look at combustible materials near the structure. On a hillside parcel off Day Valley Road, that frequently means the home-adjacent run should be noncombustible aluminum rather than vinyl, even when the rest of the property’s fence is vinyl.
We steer Day Valley owners toward aluminum on those home-adjacent runs, and we spec the installation so it passes a County fire-safe review the first time. The permitting conversation is different here. There is no City of Day Valley building department. Everything runs through Santa Cruz County, and the fire review rides along with the standard permit. A contractor who hasn’t worked this zone will get that wrong.
Jerith Models & Products We Service in Day Valley
We service the full Jerith residential line, including Heritage-style aluminum ornamental picket panels, Belmont-style vinyl tongue-and-groove privacy panels, aluminum railing systems, and vinyl picket and post-and-rail fencing. When a system is still in production, we source genuine Jerith replacement parts. When it’s been discontinued, we match quality aftermarket components that fit the existing post profiles and picket spacing.
Our familiarity with Jerith’s catalog runs deep enough that we can usually identify a model and spec the right parts from photos before we ever drive up your private road. For broader Jerith sales and service context, see Jerith sales & service.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Day Valley
What you’ll pay for Jerith work in Day Valley depends on slope, access, and whether we’re repairing a section or replacing a full run. Steep parcels with narrow private road access take longer and cost more than flat ground. Here’s where our pricing lands:
| Service | Typical Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
A free estimate includes a site visit, slope and drainage assessment, and a written line-item quote. We don’t give change orders after the fact. Call (833) 725-3508 to schedule yours.
Serving Day Valley, CA — Our Local Coverage Area
We’re based in the Day Valley area and know this community well, and we also provide Aptos Hills-Larkin Valley Jerith service. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Day Valley
A vinyl Jerith fence can survive in Day Valley, but not everywhere on your property. Within the defensible-space envelope around the home, Chapter 7A WUI review often requires noncombustible fencing, which means vinyl won’t pass. We typically recommend vinyl for the outer property lines and aluminum for the home-adjacent run, similar to our approach for Jerith service in La Selva Beach. Call (833) 725-3508 and we’ll walk your property line with you to map it out.
Because the downhill post is moving, not the gate itself. Day Valley’s steep soils heave and creep after heavy rain, and the footing shifts enough to drop the gate leaf. Adjusting hinges won’t fix it. The post needs to be reset on a deeper footing with proper drainage. We do this regularly between January and April. Call (833) 725-3508 for a site assessment.
Most fences in Day Valley do require a Santa Cruz County permit, and if the run falls within the defensible-space envelope around the home, a County fire-safe review under Chapter 7A WUI standards often rides along with it. We handle the permitting and fire review as part of the job. Estimates are free; call (833) 725-3508 to get one.
If the fence line is still in production, we source genuine Jerith panels and pickets. If it’s discontinued, we match quality aftermarket components to the existing post profile, picket spacing, and finish. Older vinyl will have sun-faded slightly, so we’ll be honest with you about whether a patch will show or the run should be replaced.
The short answer is deeper concrete footings with proper drainage gravel, and surface water management above the fence line. On steep Day Valley parcels, we often add a small swale or French drain upslope of the run so runoff doesn’t saturate the post holes. The long-term fix is engineering the footing for the slope, not pouring more concrete and hoping. We’ll spec it during the free estimate. Call (833) 725-3508.
Service Areas Near Day Valley
We serve Day Valley and the surrounding South Santa Clara County and Santa Cruz County communities, including Morgan Hill, San Martin, Gilroy, Corralitos, and Interlaken. For more on our coverage, see our Day Valley service area page. We also run dedicated Jerith service routes into Jerith service in Amesti and Jerith service in Seven Trees.
Book Your Jerith Service in Day Valley Today
Do it once, do it right – everything else is just a future repair bill. Call (833) 725-3508 to schedule your free Jerith service estimate in Day Valley or Jerith service in Rio Del Mar. We’ll come out, look at your slope, check the footings, and give you a straight answer on repair versus replacement.
Written by Nate Burrell, Owner & General Contractor at Brookside Contractors, serving Day Valley and the Santa Cruz Mountains for years.