Jerith Construction in South San Francisco, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Jerith Construction in South San Francisco, CA | Brookside Contractors

We provide independent Jerith fence, gate, and railing service across South San Francisco and nearby communities, from Sign Hill and Sunshine Gardens down to the flats near El Camino and Jerith in San Bruno. The thing that separates our Jerith work here from a generic fence crew is that we actually understand what the fog belt and those hillside lots do to aluminum and vinyl over time. Call (833) 725-3508 and we’ll walk your fence line with you, tell you what’s failing, and quote the fix honestly. We’ve been working with Jerith ornamental aluminum, vinyl panels, and gate hardware on Peninsula properties long enough to know when a post needs re-footing versus when the whole run has hit the repair-vs-replace tipping point.

Contractor marking a wooden beam with a speed square and pencil in South San Francisco, CA

Call (833) 725-3508

Why South San Francisco Residents Choose Us for Jerith Service

Most fencing contractors in South San Francisco will happily sell you whatever panel they stock. We don’t work that way. Nate Burrell runs our crews with a straightforward rule: match the material to the project, not the other way around. If you’ve got an existing Jerith run with a failed section, we’re going to source the correct profile rather than patch in something close enough that you’ll notice every time you walk past it. We carry OEM-style Jerith posts, brackets, pickets, and gate hardware when the profiles match, and we’ll use quality aftermarket aluminum components when a discontinued line needs matching on an older property in the 94080 or 94083 zip. We’re not Jerith-authorized, and we won’t pretend otherwise. What we are is experienced with their product lines, honest about what holds up in marine fog, and local to the Peninsula.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common Jerith Construction Problems We Solve in South San Francisco

  • Powder-coat chalking and lifting at post bases. South San Francisco’s summer fog keeps aluminum fence surfaces damp for weeks at a time. We see coating failure first at the bottom rail and post base, an inch or two above grade where moisture sits. Once the coating lifts, the aluminum underneath starts oxidizing and you get that chalky white residue.
  • Wobbly posts and eroded footings on hillside lots. Sign Hill and Sunshine Gardens properties put fence lines directly in winter drainage paths. Undersized footings or shallow post embedment means saturated soil shifts, and the whole panel run starts leaning after a wet season.
  • Seized gate hinges and self-closing springs. Marine moisture binds Jerith walk gate hardware over time. We get calls from South San Francisco homeowners whose gates no longer latch square because the hinges have corroded or the spring has frozen up.
  • Vinyl panel bowing on exposed ridge lines. Wind load off San Bruno Mountain hits Sign Hill ridge properties hard. Where Jerith vinyl panels were set too tight without expansion allowance, thermal movement causes horizontal rail separation and bowed panels.
  • Drainage-related retaining wall conflicts. A Jerith fence line running down a sloped South San Francisco lot often sits right at the top of a retaining wall. When the wall drains poorly, the fence footings suffer. We coordinate the fence work with the slope drainage so you’re not re-setting posts every few years.

Jerith Service in South San Francisco: What Local Conditions Mean for Your Equipment

South San Francisco is the Peninsula’s biotech engine, with Genentech’s headquarters and the surrounding lab cluster sitting directly beside 1950s and 60s tract neighborhoods on the hills west of El Camino. That means our crews work two realities in the same day. We might be re-hanging a Jerith walk gate at a Sunshine Gardens home a few blocks from the Genentech campus, then coordinating Jerith repair in Daly City or a fence replacement at a light-industrial property in the East of 101 zone. The hillside residential work here carries a permitting reality that’s very specific to South San Francisco: the City’s own building department requires retaining wall and slope drainage review on sloped properties, so a Jerith fence line down a graded lot often has to be engineered alongside drainage corrections and deeper footings, not just post-and-panel replacement on flat grade. That dual industrial-plus-old-suburb character, combined with the fog-belt moisture on west-facing fencing, is what makes Jerith service here different from Daly City or San Bruno.

On a sloped Sunshine Gardens lot a few blocks from the biotech campus, our crew re-set a leaning Jerith-style aluminum ornamental fence run—similar to Broadmoor Jerith service calls—whose concrete footings had been undermined by winter drainage off the hill. We pulled the bowed panels, re-poured deeper footings tied into a corrected slope drain, replaced the seized walk-gate hinges with matching aluminum hardware, and re-hung the gate so it latches square through the fog season. That’s the kind of job that separates a real Jerith service call from a panel swap.

Jerith Models & Products We Service in South San Francisco

We handle the full Jerith residential and light-commercial range that shows up on South San Francisco properties. That includes Jerith aluminum ornamental picket fence in the Classic and Regency-style rackable panels, welded aluminum walk gates and driveway swing gates, vinyl privacy panels in Victorian and standard picket styles, and Jerith aluminum pool-code and decorative iron railing sections. When OEM pieces are backordered or a discontinued profile needs to be matched on an older run, we source quality aftermarket aluminum components that align with the original design. We keep common Jerith-matching posts, brackets, and gate hardware available locally so turnaround on a South San Francisco repair doesn’t stretch into weeks. Do it once, do it right – everything else is just a future repair bill.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Jerith Service Pricing in South San Francisco

Fence work in South San Francisco costs what it costs because of access, slope, and drainage. Hillside lots take more concrete, more labor, and sometimes more engineering. Here’s where our pricing lands:

Service Price Range
Aluminum Fence Installation $4,720 – $11,800
Vinyl Fence Installation $4,130 – $10,620
Concrete Driveway Installation $5,310 – $14,160

What drives the final number is linear footage, the condition of existing footings, slope drainage work, and whether we’re matching an existing Jerith profile or starting fresh. A free estimate from us means we walk the property, check the current fence line, and give you a written line-item quote before any work starts. Call (833) 725-3508 to schedule one.

Contractor marking a wooden beam with a speed square and pencil in South San Francisco, CA

Serving South San Francisco, CA — Our Local Coverage Area

We’re based in the South San Francisco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Jerith Construction in South San Francisco

Service Areas Near South San Francisco

Our Jerith work in South San Francisco extends to the surrounding South Bay and Peninsula communities. We regularly run fence and gate service to South San Francisco service area clients in the 94080 and 94083 zips, as well as nearby Jerith service in Montara on the coast side, Jerith service in Brisbane just north over the hill, and occasional jobs reaching Morgan Hill, San Martin, and Gilroy when owners want the same crew on multiple properties.

Book Your Jerith Service in South San Francisco Today

If your Jerith fence is leaning, chalky, or the gate won’t latch square, call (833) 725-3508. We’ll schedule a walkthrough, give you a written estimate, and tell you straight whether it’s a repair or a re-run. Nathan Burrell and our crew have been doing this long enough to know the difference.

Written by Nate Burrell, Owner & General Contractor at Brookside Contractors, serving South San Francisco and the surrounding Peninsula since day one.

Need Construction help in South San Francisco? Licensed & insured · Free on-site estimates response · free estimates
Call (833) 725-3508
Areas We Serve

Request a Free Estimate in South San Francisco

Tell us what you need — Brookside Contractors responds fast. No obligation.

By providing your information above, you acknowledge our Privacy Policy and authorize us to contact you by phone, email, or text about your service request, including from the local pros who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch