Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Colma, CA | Brookside Contractors
KraftMaid cabinet installation and service in Colma runs $4,000 – $13,000 for cabinet work and $14,000 – $45,000 for our Home Remodeling in Colma, and we handle it as an independent shop, not a manufacturer-authorized dealer. That independence matters more here than in most Peninsula cities because Colma’s fog-belt damp and aging cottage stock put KraftMaid boxes under conditions they weren’t originally designed for. Nate Burrell and our crew at Brookside Contractors work on KraftMaid cabinetry across Colma’s 94015 core, from El Camino Real cottages to the few post-war homes near Serramonte. Call (833) 725-3508 for a free estimate on KraftMaid installation, refacing, or repair.
Why Colma Residents Choose Us for KraftMaid Service
We’ve installed and serviced KraftMaid cabinetry across the Peninsula long enough to know its door styles, box construction, and hinge hardware by sight, and we work on it as an independent shop, not as anything endorsed or authorized by KraftMaid. That means we can tell Colma homeowners honestly what’s worth repairing on their existing boxes and what genuinely needs replacing. When a homeowner off El Camino Real asks whether their 2003 Vantage run can be saved, we give them a straight answer based on the framing, the finish, and how much moisture has moved through the wall behind it.
Nate Burrell grew up watching half the Paradise Valley neighborhoods in Morgan Hill get framed up when he was a kid, which put a hammer in his hand before he was old enough to drive. He trained in construction technology at Gavilan College in Gilroy and spent two decades on South Santa Clara County job sites. These days he applies that same eye to Colma’s older wood-frame homes, where out-of-plumb walls and marine moisture are as much a factor as the cabinet selection itself.
One contractor, every phase. We’re not a cabinet shop that hands you off to a countertop crew. We handle the cabinets, counters, backsplash, and any wall correction the job needs under one license and one point of contact.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Colma
- Thermofoil and painted-MDF door fronts delaminating or blistering. Colma’s near-constant fog and marine air push humidity through older walls, and thermofoil starts peeling at the edges first, usually near the sink or dishwasher. We replace the affected doors and match the existing style where possible, or reface the whole run if the damage is widespread.
- Particleboard and MDF box bottoms swelling and crumbling under sink cabinets. In cool, damp homes, a slow p-trap leak can go unnoticed for months because the cabinet base never truly dries out. We’ve pulled KraftMaid sink bases in Colma where the bottom panel had turned to crumbly pulp while the cabinet face looked fine from the outside.
- Steel hinges and slides corroding and binding. Homes near the fog belt, especially older cottages with minimal insulation, see hardware rust faster than inland properties. KraftMaid’s standard steel hardware from the 1990s and 2000s is particularly vulnerable. We switch to OEM replacements where the line is still current, or quality aftermarket hardware when it’s been discontinued, and we’ll tell you which we’re using.
- Face frames pulling apart at stapled joints on older Vantage runs. KraftMaid’s framed Vantage series used stapled joinery, and decades of damp/dry cycles in Colma’s climate cause those joints to open up. Door reveals go out of alignment and drawers stop closing square. Depending on the condition, we can re-glue and clamp frames, or we’ll recommend replacement when the wood is compromised.
- Out-of-plumb walls transferring into cabinet boxes. Colma’s early-20th-century cottages weren’t framed with modern tolerances. When we install new KraftMaid cabinets in these homes, we shim and correct the wall first so the boxes don’t twist, the doors line up, and the reveal lines stay true through the damp season.
KraftMaid Service in Colma: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic KraftMaid page: Colma’s residential stock is a handful of early-20th-century cottages and small post-war homes near El Camino Real, and those houses were framed before modern vapor management existed. That means exterior walls in Colma move moisture differently than walls in Daly City’s newer hillside tracts, KraftMaid in Pacifica, or Broadmoor’s mid-century builds. When we install KraftMaid cabinets in a 1940s cottage off El Camino Real, we’re usually correcting wall moisture and out-of-plumb framing first, because whatever is wrong with the wall will transfer straight into the cabinet boxes within two or three damp seasons. It’s not a cabinet problem. It’s a building-envelope problem that shows up as a cabinet problem. Do it once, do it right, everything else is just a future repair bill.
We saw this on a post-war cottage in the 94015 core. The homeowner had a run of 1990s KraftMaid Vantage framed cabinets with swollen particleboard bottoms and blistering thermofoil doors on an exterior wall. We traced the moisture to a failed exterior caulk line, corrected it, then set new KraftMaid boxes on shims and a sealed backer so the marine air couldn’t wick into the cabinet bottoms again. She got refaced uppers and new lower boxes in the same door style, and the reveal lines stayed true through the next damp season.
KraftMaid Models & Products We Service in Colma
We work on the full KraftMaid catalog that’s landed in Colma homes over the past three decades. The Vantage series, KraftMaid’s framed, standard-overlay workhorse from the 1990s and 2000s, shows up constantly in post-war kitchens here. The Momentum series, with its full-overlay framed doors, is the newer line we see in more recent remodels. We also service Lyndale and similar raised-panel maple and oak door styles from the 1990s and 2000s, plus painted MDF and thermofoil front lines that are common in mid-range remodels.
For parts, we use OEM KraftMaid hinges, slides, and touch-up materials where they’re still available so doors and drawers keep matching the original. When the OEM line has been discontinued, we switch to quality aftermarket hardware and tell you upfront which we’re using and why. We’re an independent KraftMaid service provider serving Colma and nearby communities through our KraftMaid sales & service practice, and our approach to repair versus replacement is simple: on boxes with solid frames and intact finish, refacing or hardware replacement is the honest call. When swelling or delamination has compromised the box, we quote replacement instead of patching it.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Colma
Here’s what KraftMaid construction work costs in Colma, based on the homes and conditions we actually see here. Your exact number depends on the condition of the walls, whether you’re refacing or replacing, and the door style you choose.
| Service | Colma Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
A free estimate from us includes a look at the wall behind the cabinets, because in Colma that’s usually where the real cost lives. If we find rot, failed moisture barriers, or framing that needs correction, we’ll tell you before you spend a dollar on cabinets. Call (833) 725-3508 to schedule yours.
Serving Colma, CA — Our Local Coverage Area
We’re based in the Colma area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Colma
Peeling thermofoil can’t be re-adhered, so those doors need replacement, not repair. We can typically match the door style from KraftMaid’s current or recent lines, or reface the entire run if the peeling is widespread. In Colma’s damp conditions, the peel usually starts near the sink or dishwasher where moisture is constant. Call (833) 725-3508 and we’ll tell you exactly what’s matched and what needs refacing, with a written line-item quote.
In Colma’s fog-belt climate, moisture moves through walls and floors even without a visible leak. Older cottages near El Camino Real often lack modern vapor barriers, so exterior walls stay damp for months at a time, and that moisture wicks into particleboard cabinet bottoms. We trace the moisture source first, correct the wall or floor condition, then install sealed backers under new boxes so the problem doesn’t come back. Call (833) 725-3508 for a free inspection.
Yes, Colma’s layout means we coordinate around mortuary district boundaries, Serramonte traffic patterns, and BART access on many jobs. Staging space is tighter than in neighboring cities, and permit review in Colma is among the most stringent in San Mateo County. We handle that coordination for you, and we build the schedule around it so your install doesn’t stall at the permit counter.
Often, yes. The Vantage and Lyndale raised-panel styles from the 1990s and 2000s are well documented, and we maintain a library of samples and sourcing channels for discontinued KraftMaid door profiles. When a true match isn’t available, we’ll show you the closest current options and tell you honestly whether refacing the whole kitchen makes more sense than a partial match. Call (833) 725-3508 with a photo of your doors.
If your boxes are solid and your doors are intact, hardware replacement is absolutely worth it, especially in Colma where marine moisture corrodes hinges and slides faster than inland. We’ll assess the boxes, frames, and door condition, then give you a straight answer: reface and re-hardware, or replace. Many Colma homeowners save tens of thousands by going the hardware route when the structure is sound. Call (833) 725-3508 for an honest assessment.
Service Areas Near Colma
We serve Colma and the surrounding Peninsula communities, including Colma service area coverage across the 94015 ZIP. Our KraftMaid work extends into KraftMaid service in Broadmoor and KraftMaid service in Daly City, along with South County towns like Morgan Hill, San Martin, and Gilroy for larger remodels.
Book Your KraftMaid Service in Colma Today
If your KraftMaid cabinets are showing their age, or if you’re planning a kitchen remodel in Colma, call (833) 725-3508 to schedule a free estimate. We’ll come out, look at the walls behind the cabinets, and give you a line-item quote with no pressure and no guesswork.
Written by Nate Burrell, Owner & General Contractor at Brookside Contractors, serving Colma with independent KraftMaid cabinet installation, refacing, and repair.