Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Millbrae, CA | Brookside Contractors
We provide independent KraftMaid cabinet installation, refacing, and repair across Millbrae (94030). The thing that makes our KraftMaid work different here comes down to one fact: Millbrae sits on bay mud near the San Andreas Fault, so almost every cabinet job we take involves walls that aren’t level, floors that have moved, or a kitchen that just went through a structural retrofit. We’ve built our KraftMaid process around that reality. If you’re planning KraftMaid cabinetry in Millbrae, call (833) 725-3508 for a free estimate. We’re independent, not manufacturer-affiliated; we answer to you, not a corporate warranty department.
Why Millbrae Residents Choose Us for KraftMaid Service
KraftMaid cabinets are built well, but they’re only as good as the install. In Millbrae, that’s especially true. The 1950s and 60s tract homes that dominate this city have pier-and-post foundations, settled floors, and walls that shifted decades ago. If you hang a cabinet plumb on a wall that’s half an inch out, the doors will never close right. We’ve spent years working on KraftMaid sales & service in exactly these conditions. Nate Burrell, our owner, trained in construction technology at Gavilan College and spent two decades on job sites throughout the South Bay before starting Brookside Contractors. He grew up watching cheap work fail. So we shim, scribe, and level every box, every run, every time. We source OEM KraftMaid parts for hinges, glides, and door fronts, and we’ll tell you honestly when a cabinet box is worth saving versus replacing. That’s the kind of straight answer Millbrae homeowners call us for.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Millbrae
Here’s what we see repeatedly in Millbrae kitchens, and what we do about it:
- Warped or swollen door fronts. Millbrae’s foggy summers and damp winters push moisture into older KraftMaid Vantage doors with particleboard cores. The door edge swells, the finish cracks, and the door won’t sit flush. We replace the front with an OEM or quality aftermarket equivalent and seal the edges before install.
- Peeling or blistering finish. Chatham and Waypoint series with painted or stained finishes don’t love year-round humidity, especially in kitchens without good ventilation. We see blistering near the stove and sink first. The fix is usually a refinish or door replacement, not a full tearout.
- Soft-close hinges that sag or bind. Millbrae’s salty bay air is hard on metal hardware. The Blum-style hinges KraftMaid uses are good, but corrosion sets in faster here than in, say, San Carlos. We replace worn glides and hinges with OEM parts when available, and we adjust the door alignment so everything closes clean.
- Cabinet box delamination from seismic movement. This shows up most on older Medallion lines in pier-and-post homes. When the ground shifts, the house moves with it, and glued joints start to separate. If the box is structurally sound, we can reinforce and re-align. If not, we’ll tell you replacement is the smarter call.
- Out-of-level runs after a retrofit. A homeowner bolts the foundation, adds shear walls, and suddenly the kitchen walls are a quarter inch off where they used to be. We handle this with custom shimming and scribe molding, so the cabinets sit level even when the wall doesn’t.
KraftMaid Service in Millbrae: What Local Conditions Mean for Your Equipment
Millbrae is one of the few cities on the Peninsula that requires soil reports and geotechnical investigations even for small additions. That’s because the city is built on bay mud fill, and it sits close enough to the San Andreas Fault that the planning department doesn’t take chances. What this means for a KraftMaid in Burlingame or Millbrae cabinet job is that the install rarely happens in isolation. A kitchen remodel in Millbrae often runs alongside foundation bolting, shear wall retrofits, or a plan check that turned up unpermitted work from the 1970s. When the structure gets stiffened, wall planes shift by fractions of an inch. Cabinets that were templated off old measurements will not fit. We account for that on the front end. It’s a level of planning you won’t get from a big-box installer who’s never worked in Millbrae, and it’s why we measure twice, then measure again after the structural work is done.
One recent job: a 1950s ranch near Millbrae Avenue with original pier-and-post framing that had settled unevenly over sixty years. The homeowner had seismic bolting and shear walls done first. Then we installed a full KraftMaid Vantage kitchen with adjustable legs and scribed fillers to follow the out-of-level walls, and finished it with Cambria quartz counters that shrug off moisture. That’s how Hillsborough KraftMaid service and Millbrae work should go in this city.
KraftMaid Models & Products We Service in Millbrae
We install, reface, repair, and replace across the KraftMaid lines you’re most likely to find in Millbrae homes: Vantage, Chatham, Waypoint, and Medallion. Vantage and Chatham are the most common in the 50s and 60s tract homes here, often original installs that have seen decades of Peninsula moisture. Waypoint shows up a lot in mid-range remodels from the early 2000s. Medallion tends to be the line homeowners pick when they’re doing a full kitchen gut and want a deeper, heavier box. We keep common KraftMaid hardware on the truck for fast turnaround in Millbrae: hinges, drawer glides, shelf clips, and touch-up kits. For door fronts and specialty components, we order OEM when lead times are short enough, and we’ll be upfront about the tradeoff between waiting and using a quality aftermarket equivalent.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Millbrae
What you’ll pay depends on scope: a simple cabinet swap costs far less than a full kitchen with counters, backsplash, and island. Here’s where our Millbrae pricing lands:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
The biggest cost drivers in Millbrae are structural: if your foundation needs bolting or the walls need shear work before cabinets go in, that’s a separate line item we’ll flag early. Every estimate includes a site visit, thorough measurements, and a written line-item quote. No change orders mid-job. Call (833) 725-3508 for an exact quote. Estimates are free.
Serving Millbrae, CA — Our Local Coverage Area
We’re a Millbrae General Contractor based in the area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Millbrae
Yes. In fact, that’s most of our Millbrae work. We coordinate with the structural scope: we measure and template after the bolting and shear wall work is complete, because walls move during retrofits. Then we install with adjustable legs and scribed fillers so the cabinets sit level regardless of the wall’s irregularities, just as we do for KraftMaid service in South San Francisco.
Vantage and Chatham are the two we see most in the 1950s and 60s tract homes around Millbrae. Both were widely sold through big-box retailers and are now showing their age: worn hinges, chipped finishes, and moisture-related swelling in kitchens without good exhaust. Waypoint and Medallion appear in more recent remodels.
The ground here moves, and so do the houses. Pier-and-post foundations settle unevenly over decades, and seismic events shift walls by fractions of an inch. Cabinets installed without accounting for that end up with misaligned doors and gaps at the scribe line. We shim at the base, scribe the fillers, and level every box off the floor, not the wall.
Soil reports and geotechnical investigations are required by the city for additions, but they’re typically not required for an interior kitchen remodel that doesn’t change the building footprint. If your project does trigger that requirement, we bring in a licensed geotechnical engineer and pull the permits. We don’t skip that step, and we don’t recommend anyone who does.
Ventilation is the thing most Millbrae kitchens are missing. A properly ducted range hood pulls moisture out before it settles into cabinet faces. Beyond that: quality edge sealing on doors, soft-close hinges with corrosion resistance, and keeping the kitchen above 55 degrees year-round. For a quote on moisture-resistant cabinet work in Millbrae, call (833) 725-3508.
Service Areas Near Millbrae
While we work throughout Millbrae service area daily, we also take KraftMaid projects in nearby communities. That includes KraftMaid service in San Bruno just north, Burlingame, San Mateo, and over the hill in KraftMaid service in El Granada on the coast. If your home sits anywhere in this stretch of the Peninsula, we can help.
Book Your KraftMaid Service in Millbrae Today
Need a KraftMaid quote on the Peninsula? Call (833) 725-3508 and we’ll get you scheduled. We’ll walk the space, measure, and give you a straight answer on price and timeline. Do it once, do it right – everything else is just a future repair bill.
Written by Nate Burrell, Owner at Brookside Contractors, serving Millbrae and the surrounding Peninsula with KraftMaid installation, refacing, and repair.