Mr-Glass Construction in Colma, CA

Mr-Glass Construction in Colma, CA | Brookside Contractors

We provide independent Mr-Glass repair in South San Francisco and across Colma, from storefront framing along Serramonte to shower enclosures in the town’s handful of older homes. What makes our work different here is simple: Colma’s fog belt and cemetery-adjacent geography punish glass and aluminum in ways inland installers never see. We’ve spent years pulling apart corroded Mr-Glass frames and fogged sealed units in this exact microclimate, so we know what fails first and how to fix it so it stays fixed. Call (833) 725-3508 for a free estimate.

Call (833) 725-3508

Why Colma Residents Choose Us for Mr-Glass Service

Most glass contractors in San Mateo County treat Colma as a pass-through on the way to bigger jobs. We don’t. We know the town’s 17 cemeteries mean nearly every installation sits next to masonry, steel embeds, or irrigated grounds that hold moisture against aluminum frames year-round. Nate Burrell, our owner and General Contractor – Colma, grew up watching cheap crews cut corners on coastal-adjacent jobs, and he built this company to do the opposite. We set Mr-Glass panels and storefront frames the way they should have been set the first time: with corrosion-resistant fasteners, proper weep detailing, and glazing that accounts for fog, not just rain.

We’re independent of Mr-Glass. That matters in Colma, because we’re not beholden to a manufacturer’s line sheet. If a Mr-Glass 200 Series frame needs OEM gaskets, we use them. If a shower enclosure in a 1920s cottage needs custom out-of-square templating, we cut to the actual dimensions of the opening, not a spec sheet. Homeowners and commercial property managers in Colma work with us because we tell them the truth about what will hold up and what won’t in this damp, windy pocket of the Peninsula, whether they need glass repair or Home Remodeling in Colma.

For broader context on how we approach the brand, see our Mr-Glass sales & service overview. And for where we work across the town, visit the Colma service area page.

Common Mr-Glass Construction Problems We Solve in Colma

• Fog-belt condensation wicking behind storefront glazing. Retail frontages along Serramonte and Junipero Serra hold moisture against Mr-Glass frames almost constantly between May and September. That damp creeps behind the glazing, corrodes the aluminum, and clouds the sealed unit from the inside. We find this on nearly every older commercial storefront in Colma.
• Galvanic corrosion where Mr-Glass aluminum meets cemetery-district masonry. Colma has more mortuary and cemetery-adjacent concrete walls than any city its size. When raw aluminum sits against that masonry without isolation, the marine moisture turns the joint into a slow battery. Fasteners rot, frames pucker, and glass starts to stress-crack.
• Wind-driven rain at sliding door tracks on El Camino Real. Mr-Glass 450 Series sliding doors on exposed El Camino commercial entries take wind off the Pacific gap. Weep holes clog, tracks fill, and water ends up inside the threshold. The fix is rarely just cleaning the weep; it’s usually re-flashing the sill and replacing compressed gaskets.
• Out-of-square rough openings in Colma’s oldest cottages. The handful of early-1900s homes near the town core shift with seasonal moisture swings. Mr-Glass shower panels templated to square corners bind at the hinges or crack at the outer edge within a year or two. We template to the actual opening, shim to true, and leave room for the wood to move.
• Sealed unit failure from persistent fog and no sun-side drying cycle. Inland sealed units bake dry after morning condensation. Colma’s fog often never fully burns off, so moisture sits in the frame channel all day. That’s why we stock low-E and argon-filled replacements suited to constant damp, and why we recommend them for any storefront retrofit here.

Mr-Glass Service in Colma: What Local Conditions Mean for Your Equipment

Colma’s commercial corridor along Junipero Serra and Serramonte sits on former cemetery-adjacent land where groundwater runs high and fog-driven damp keeps below-grade storefront frames and shower enclosures wet year-round. This is not a generic Peninsula condition. Daly City gets wind, Burlingame gets some fog, but Colma’s combination of low-lying infill, irrigated cemetery grounds, and near-constant marine moisture means Mr-Glass installations here need corrosion-resistant fasteners and enhanced weep detailing that inland jobs simply don’t require. We learned this pulling a mortuary facility’s storefront near El Camino Real: the original aluminum fasteners had corroded against the masonry embeds, the sill flashing had failed, and every sealed unit was clouded. We pulled the glazing, switched to stainless, re-flashed the sill, and reset with new OEM gaskets. That entry has stayed dry through two full fog seasons. That’s the difference between a contractor who knows Colma and one who just works in it.

Mr-Glass Models & Products We Service in Colma

We service the full Mr-Glass commercial and residential line. That includes the 200 Series aluminum storefront framing you see on Serramonte retail fronts, 450 Series sliding glass doors on El Camino Real commercial entries, tempered shower enclosure systems in the town’s older cottages and newer infill homes, and custom mirror and glass partition units for mortuary facilities and commercial build-outs. For weather-critical and structural components, we use OEM Mr-Glass hardware and gaskets. For secondary seals and rollers, we’ll use quality aftermarket parts when they meet or exceed OEM spec. We stock the common gaskets, rollers, and setting blocks for fast Colma turnaround, and we can order anything else within a day or two.

Mr-Glass Service Pricing in Colma

Here’s where Mr-Glass work typically lands in the Colma market. These are installed ranges; framing conditions, opening size, and corrosion damage move the final number.

Service	Typical Range
Frameless Glass Shower Enclosure Installation	$4,500 – $12,000
Window Replacement	$4,500 – $15,000
Impact Window Installation	$8,000 – $25,000

What drives cost in Colma is corrosion remediation. If we’re just resetting gaskets and cleaning weep holes, you’re at the low end. If we’re pulling frames, replacing corroded embeds, and re-flashing sills, the labor adds up. A free estimate includes a full assessment of what’s salvageable and what isn’t. Call (833) 725-3508 to schedule one.

FAQs – Mr-Glass Construction in Colma

Service Areas Near Colma

We serve Colma and the surrounding Peninsula communities, including Mr-Glass service in Broadmoor, Mr-Glass service in Daly City, South San Francisco, San Bruno, and Pacifica. Different fog patterns, same standard: work that holds up.

Book Your Mr-Glass Service in Colma Today

If you’re tired of clouded glass and corroded frames, call (833) 725-3508. We’ll walk the site, tell you what’s actually wrong, and give you a written estimate. No pressure, no padding. Do it once, do it right – everything else is just a future repair bill.

Written by Nate Burrell, Owner & General Contractor at Brookside Contractors, serving Colma and the surrounding Peninsula.