Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Foster City, CA | Brookside Contractors
We provide independent Mr-Glass service across Foster City, CA – windows, sliding patio doors, and shower enclosures on the fill-built, lagoon-front lots that define this city. What makes our Mr-Glass work different here is that we understand how this product line behaves in marine air, on settling slab-on-grade foundations, and around the levee system that rings every one of the 94404 zip code. If you need a Mr-Glass sliding door re-hung, a shower enclosure repaired, or full window replacement on a Foster City home, call (833) 725-3508 for a free estimate.
We’re Brookside Contractors, an independent Bay Area general contractor led by Nate Burrell. We buy, template, and install Belmont Mr-Glass service for Foster City homeowners, but we are not authorized, endorsed, or partnered with Mr-Glass and make no warranty claims on their behalf. Our years fitting Mr-Glass windows, doors, and enclosures into Foster City’s planned-community housing stock mean we know exactly how this product line performs here – and where it fails.
Why Foster City Residents Choose Us for Mr-Glass Service
Foster City isn’t like the rest of the Peninsula. Nearly every home sits on reclaimed marshland and landfill, ringed by levees, with a water table that sits close enough to the surface to shape how foundations settle and how moisture moves through a house. That reality changes how Mr-Glass installations age, and we’ve learned it the way you learn anything on a job site: by pulling apart corroded tracks, re-flashing leaking sills, and re-hanging glass panels that no longer sit plumb.
Nate Burrell grew up in the Paradise Valley area of Morgan Hill, where half the neighborhoods were still being framed when he was a kid. That’s probably what put a hammer in his hand before he was old enough to drive. He trained in construction technology at Gavilan College in Gilroy, then spent the better part of two decades on job sites throughout South Santa Clara County. These days his clients say the same thing his neighbors at the Saturday morning farmers market on East Main will tell you: he’s straight with you. He got into contracting because he watched his dad’s garage addition fall apart three years after a cheap crew walked off the job, and he decided someone should do it right. “Do it once, do it right – everything else is just a future repair bill.”
For Foster City homeowners, that means honest repair-versus-replace calls instead of pushing full replacements when hardware will do. We source OEM Mr-Glass rollers, hinges, gaskets, and seals where they’re still produced, and fall back to quality aftermarket hardware that matches profile and finish when OEM is discontinued. One contractor, every phase – from the first template measurement to the final walkthrough.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Foster City
- Salt-corroded aluminum frames on lagoon-front sliding doors. The bay air does real damage out here. Mr-Glass aluminum framed sliders on Foster City lagoon-front homes corrode at the fasteners and pit along the track years before an identical unit in San Mateo or Belmont would show the same wear. We replace corroded hardware with OEM-matched pieces and re-hang panels so they roll clean again.
- Water intrusion around Mr-Glass window and door openings on flat, fill-built lots. Winter rain pools on Foster City’s nearly flat yards, and when the flashing around a Mr-Glass opening fails, water finds its way in. The glass is usually fine – the seal and sill detailing failed. We re-flash openings and reset sills so water moves away from the house instead of into it.
- Binding and chipping Mr-Glass shower enclosures in slab-on-grade baths. Foster City’s 1960s through 1990s tract homes and condos often sit on slab foundations that settle unevenly. When the framing racks, original Mr-Glass enclosure panels bind at the hinges and chip or crack at fastener points. We assess whether the opening can be re-plumbed and the hardware swapped, or whether a new Walk-In Shower Installation makes more sense long-term.
- Sticking Mr-Glass sliding patio doors with worn rollers and corroded tracks. Grit and moisture on bayside openings accelerate roller and track wear. Doors start sticking, then let water in during winter storms. We replace OEM rollers and track where possible, and tell you straight when the frame has gone too far to save.
- Out-of-square Mr-Glass window replacements on settling tract homes. When a slab settles, window openings go out of square. A new Mr-Glass tempered unit can’t fix that – the opening has to be corrected first. We order glass to the actual opening dimensions and adjust framing so the new unit seats properly.
Mr-Glass Service in Foster City: What Local Conditions Mean for Your Equipment
Here’s the thing people from outside Foster City don’t always grasp: this city is entirely reclaimed marshland and landfill. The soil is young, soft, and often saturated. Shallow groundwater sits close to the surface, and the city’s engineers designed an entire levee system to keep the bay out. Every construction project here – including Mr-Glass window and enclosure work – is a fill-and-water-table problem, not the sloping-lot hillside job you’d see in neighboring Mr-Glass in Redwood Shores or San Mateo.
On the lagoon-front streets near the planned-community tracts, a Mr-Glass sliding door or shower enclosure doesn’t just fight salt air. It fights a settling slab that puts glass panels out of square, pulls fasteners loose, and cracks seals that were never designed for constant moisture movement. We’ve re-set Mr-Glass patio doors on fill-set slabs that had dropped below grade, re-flashed the openings, replaced corroded rollers and OEM-matched track, and re-hung the tempered panels plumb. It beat a full replacement, and it stopped the winter water intrusion. That’s the kind of repair you only learn to do right by doing it wrong once or twice. We learned it here.
Mr-Glass Models & Products We Service in Foster City
We service the Mr-Glass product lines most common across Foster City’s 1960s through 1990s housing stock: aluminum framed sliding glass doors, framed and semi-frameless shower enclosures, tempered glass window and patio-door replacement units, and Mr-Glass mirror and glass panel installations. For each, we carry OEM Mr-Glass replacement rollers, hinges, gaskets, and seals where they’re still produced. When a specific OEM part has been discontinued – which happens on older tract-home units – we switch to quality aftermarket hardware that matches the profile and finish so the repair holds up.
That approach applies whether we’re doing a full Window Replacement, a Frameless Glass Shower Enclosures upgrade, or a straightforward Shower Replacement on a Foster City condo. We match the material to the project, not the other way around.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Foster City
What you’ll pay depends on the scope, the condition of the existing frame, and whether we’re repairing hardware or replacing glass. Here are the ranges we work within across Foster City:
| Service | Cost Range |
|---|---|
| Window Replacement | $4500 – $15000 |
| Walk-In Shower Installation | $4500 – $12000 |
| Shower Replacement | $3000 – $8500 |
| Roof Repair | $400 – $1800 |
Your free estimate includes a written line-item quote with fixed pricing. We pull permits where Foster City requires them, and we don’t change the price once we start. Call (833) 725-3508 to schedule yours – the estimate is free and there’s no obligation.
Serving Foster City, CA — Our Local Coverage Area
We’re based in the Foster City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Foster City
Most binding Mr-Glass enclosures on slab-on-grade Foster City baths are a framing-settlement problem, not a glass problem. The slab has moved, the opening is racked, and the panels bind at the hinges or chip at fastener points. We can often re-plumb the opening and replace worn OEM hardware for a fraction of a full replacement. If the glass is chipped, the frame is corroded, or the opening is badly out of square, replacement is the cheaper long-term answer. Call (833) 725-3508 and we’ll give you an honest read before you spend a dollar.
Yes – and this is one area where generic Mr-Glass advice falls short. Lagoon-front Foster City homes get salt-laden air that pits aluminum frames and corrodes standard fasteners years before inland units show the same wear. We specify corrosion-resistant hardware and marine-grade fasteners on any Mr-Glass sliding door or enclosure within a block of the lagoon. The glass itself is fine; it’s the metal around it that fails first. Call (833) 725-3508 to have one of our crew look at what’s on your doors now.
In most cases, same-size window replacements fall under Foster City’s standard building permit process – not the bayfront or levee-adjacent review that comes with structural or lagoon-edge work. But if your home sits on the lagoon side or near the levee, any project touching the building envelope pulls extra floodplain scrutiny, and that can extend the timeline. We handle the permit paperwork, and we’ll tell you upfront what Foster City is going to ask for before we start. Estimates are free – call (833) 725-3508.
It depends on what’s in the permit and what stage the inspection schedule is at. We sequence enclosure installs around Foster City’s inspection sign-off points so you’re not ripping out fresh glass when the inspector wants to see the waterproofing underneath. We’ll coordinate with the rest of your bath remodel, and we’ll tell you the earliest moment we can safely set the glass without back-tracking. One contractor, every phase – call (833) 725-3508 to talk through the timeline.
On Foster City’s flat, fill-built lots, winter rain pools around the foundation and finds its way into any gap. When a Mr-Glass sliding door starts sticking and leaking at the same time, the usual culprit is worn or corroded rollers combined with a sill that’s settled below grade. The fill under the slab has settled, the door dropped, and now water follows the low point. We re-flash the opening, replace the rollers and track with OEM-matched hardware, and re-hang the panels plumb. Call (833) 725-3508 for an exact quote. You’ll have the number before any work starts.
Service Areas Near Foster City
Brookside Contractors serves Foster City and the surrounding South Bay and Peninsula communities. We provide Mr-Glass sales & service across the region, including full Foster City service area coverage. For homeowners in neighboring communities, we also offer Mr-Glass service in Highlands-Baywood Park and Mr-Glass service in San Mateo. If you’re in Morgan Hill, San Martin, Gilroy, or the surrounding Santa Clara County area, we bring the same Mr-Glass expertise to your job site.
Book Your Mr-Glass Service in Foster City Today
If your Mr-Glass windows, doors, or shower enclosures need attention, don’t wait for water intrusion or salt corrosion to get worse. Call (833) 725-3508 today to schedule your free estimate. We’ll come out, assess the real condition of your Mr-Glass units, and give you a written line-item quote – no pressure, no change orders, no surprises.
Written by Nate Burrell, Owner & General Contractor at Brookside Contractors, serving Home Remodeling in Foster City and the broader Bay Area with licensed, insured, and bonded construction services.