Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Pacifica, CA | Brookside Contractors
Brookside Contractors provides independent Unilock paver and wall installation across Pacifica, from Linda Mar to the west-side bluffs. We’re not a Unilock dealer or authorized rep. What we are is a Pacifica General Contractor that’s spent years installing Unilock’s Brussels Block, Beacon Hill, and Pisa2 lines on steep, fog-soaked Pacifica hillsides where drainage and slope stability decide whether a hardscape lasts five years or thirty. If you’re pricing a paver driveway, patio, or retaining wall in the 94044, call (833) 725-3508 for a free estimate.
Why Pacifica Residents Choose Us for Unilock Service
Unilock makes a solid paver. But a paver is only as good as the base under it, and in Pacifica the base is the whole ballgame. We’ve torn out enough failed driveways on hillside streets to know exactly what happens when someone compacts a few inches of road base onto damp, shifting soil and calls it done. The pavers tilt, the joints open, and the first real winter rain sends water straight toward the foundation. Nate Burrell, our owner and general contractor, learned this the hard way watching a cheap crew’s work fail on his own family’s property years ago. He’s been particular about drainage and base prep ever since. We carry that same standard into every Unilock job we take in Pacifica, using genuine Unilock pavers and walls paired with aftermarket base materials and polymeric sands that actually hold up in wet, salty coastal air. Need Unilock repair in South San Francisco? We bring the same exacting standards there too.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Pacifica
- Efflorescence and salt staining on Brussels Block pavers. Pacifica’s fog doesn’t just sit on the surface. It carries salt and fine moisture that works into the paver pores, leaving chalky white deposits that regular cleaning won’t fully remove. We address the underlying moisture path and clean or replace affected pavers so the staining doesn’t return in six months.
- Settlement and heaving on steep terraces. When a paver driveway on a Pacifica hillside wasn’t built with an engineered base section, winter rain saturates the subgrade and the whole surface starts to creep. You’ll see lippage between pavers, joint sand washing out, and low spots that pond. We rebuild with deeper, compacted aggregate and proper drainage so the surface stays flat.
- Bulging or leaning Pisa2 wall blocks. Retaining walls behind Pacifica homes take a beating. Without a clean drainage layer and weep holes, water builds up behind the wall all winter, and that hydrostatic pressure pushes blocks out of line. We fix the drainage first, then reset or replace the wall.
- Color fade and surface pitting on older Unilock pavers. Constant dampness, low sun, and salt air age pavers faster here than inland. Older Unilock surfaces in Pacifica often show pitting and faded color where water pools. We can match and replace sections, or resurface where it makes sense.
- Driveway channels water toward the garage. On hillside lots, a settled paver driveway becomes a gutter aimed at the house. This is one of the most common issues we see in Pacifica, and it’s often a drainage failure as much as a paver failure.
Unilock Service in Pacifica: What Local Conditions Mean for Your Equipment
Pacifica isn’t Daly City and it sure isn’t San Mateo. Five miles inland, a paver patio is a paver patio. Here on the marine terraces, it’s a structure. The city sits on steep slopes and landslide-prone bluffs, and the coastal development rules reflect that. On west-side bluff neighborhoods, a Unilock paver driveway or retaining wall often triggers a coastal development permit and a geotechnical review before we can even pull the city permit. That means slope-stability reports, engineered base specifications, and drainage plans. We design for that reality from the first site visit. A few miles east, nobody thinks about slope creep. In Pacifica, it’s the first thing we look at. That’s the difference between a hardscape that holds through two wet seasons and one that’s sliding toward the neighbor’s deck by year three.
Unilock Models & Products We Service in Pacifica
We install and repair the Unilock lines most common on Pacifica properties: Brussels Block for driveways and walkways, Beacon Hill for a more formal, tumbled look, and Pisa2 for retaining walls and seat walls. We also work with Techo-Bloc products that are often installed alongside Unilock. When a repair calls for matching color and dimension, we source genuine Unilock components. For base material, joint sand, and drainage fabric, we use aftermarket products that outperform in Pacifica’s wet, foggy ground. You get an honest recommendation on repair versus replacement, and on a section repair, matched pavers often save thousands over tearing out a whole driveway. If you’re weighing Unilock sales & service options, this is the type of guidance we provide.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Pacifica
What does Unilock work cost in Pacifica? Here’s a straight answer. The table below covers the three most common projects we do here. Costs shift with access, slope, drainage work, and whether a coastal permit and geotech report are involved, which they often are on hillside lots.
| Project | Typical Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Those numbers assume typical Pacifica site conditions. A steep lot with poor access or a required drainage overhaul pushes toward the higher end. A flat Linda Mar lot with easy street access lands lower. Your free estimate includes a written line-item quote so you see exactly where the money goes. Call (833) 725-3508 to schedule yours.
Serving Pacifica, CA — Our Local Coverage Area
We’re based in the Pacifica area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help. That includes Unilock service in San Bruno and surrounding Peninsula communities.
FAQs – Unilock Construction in Pacifica
On many west-side bluff and hillside properties, yes. Pacifica’s coastal zone rules mean a paver driveway or wall that disturbs soil on a slope often triggers a coastal development permit and possibly a geotechnical review. We check your property’s status before quoting, and we handle the permit paperwork as part of the job. Call (833) 725-3508 and we’ll tell you what applies to your address.
Fog and salt air accelerate efflorescence and surface wear on concrete pavers. Moisture carries salt into the paver surface, leaving white mineral deposits and dulling color faster than inland. The fix is partly material choice, partly drainage, and partly sealing where appropriate. We account for all three on Pacifica jobs.
Yes, but only with an engineered base section and proper drainage. The pavers themselves won’t slide if the base is compacted in lifts over stable subgrade, and if water is directed away from the slope face. Many failed hillside paver jobs in Pacifica start with water, not weight. We design for slope creep from day one.
Brussels Block holds up well on driveways because of its density and interlock, but any concrete paver in Pacifica benefits from a sealed surface and solid drainage underneath. Beacon Hill works nicely for patios where a tumbled look fits the older beach bungalow aesthetic. The real key isn’t the paver style, it’s what’s under it. Call (833) 725-3508 for a recommendation based on your specific site.
Most Unilock paver patios in Pacifica run $3,500 to $11,000, depending on size, site prep, slope, and drainage work. A simple flat patio in Linda Mar starts at the lower end. A hillside patio with retaining walls and drainage on the upper end of Pacifica’s terrain will cost more. Estimates are free, so call (833) 725-3508 for an exact number.
Service Areas Near Pacifica
Most of our Unilock work in this part of the coast stays within the 94044. We also take on projects in nearby communities along the coast and over the hill: Pacifica service area covers the fog belt, while Unilock service in Visitacion Valley and Unilock service in Colma reach just over the ridge where drainage and soil conditions change noticeably. Morgan Hill, San Martin, and Gilroy round out our South Bay coverage.
Book Your Unilock Service in Pacifica Today
If your Unilock pavers or walls need work in Pacifica, let’s look at the site and give you a real number. We also handle Unilock repair in Broadmoor and nearby areas. Call (833) 725-3508 to schedule a free estimate. We’ll tell you what’s worth repairing and what’s worth replacing.
Written by Nate Burrell, Owner at Brookside Contractors, serving Pacifica and the surrounding coast since day one. Do it once, do it right – everything else is just a future repair bill.