Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable General Contractor Across Tiburon
On a hillside parcel above the Tiburon waterfront, we recently tore out a deck where the galvanized joist hangers had chalked and rusted through from years of salt fog. The homeowner had paid for what looked like a solid rebuild a decade ago. What they actually got was an inland-spec job on a coastal site, and the fasteners gave out long before the framing did. That’s the pattern we see across Tiburon, and it’s why a general contractor here has to think about materials differently from someone working a flat lot in San Rafael. We’re Brookside Contractors, led by Nate Burrell, and we’ve spent years working the steep lots, marine exposures, and strict design-review process that define construction on this peninsula. Call (833) 725-3508 for a free estimate.
Why Brookside Contractors Is Tiburon’s Preferred General Contractor Company
We didn’t start as a niche trade shop. We’re a full General Contractor team that handles structural work, interior remodeling, exterior envelope, and ADU construction under one license and one point of contact. For Tiburon homeowners, that matters more than it does almost anywhere else. The hillside lot that needs a retaining wall rebuilt probably also needs the deck re-flashed, the drainage re-routed, and the kitchen vented through a wall that faces daily salt spray. Coordinating four separate specialty contractors across those scopes, on a street with narrow access and strict truck-window rules, is where projects stall for months. We keep every phase moving because we own the whole schedule.
Tiburon’s design-review board and hillside ordinances add a layer of permitting complexity that flatland contractors underestimate. We budget for geotechnical reports before the first shovel goes in, not after the permit office asks for one. That up-front planning is why our Tiburon projects tend to move through review faster than homeowners expect, and why our customers in Belvedere, Paradise Cay, and the Reed Ranch area keep referring us to neighbors.
Styles & brands we work with







General Contractor Services in Tiburon
General Contractor Services in Tiburon cover the full spectrum of residential work: interior remodels, exterior renovations, structural upgrades, and ADU construction. The work here isn’t just bigger than average, it’s governed by a set of coastal and geotechnical rules that shape every decision from foundation type to fastener grade. A typical kitchen remodel in Tiburon runs $14,000 to $45,000 depending on scope and finish level. A bathroom remodel lands between $9,000 and $28,000. An ADU project starts around $90,000 and can exceed $220,000 when hillside work is involved.
Kitchen and Bath Remodeling
We manage the entire scope: cabinetry from KraftMaid or Wellborn, countertops from Cambria or Caesarstone, fixtures from Kohler or Toto. On a Tiburon remodel, we also pay close attention to what’s behind the finishes. Older hillside cottages often hide undersized or unpermitted work that only shows up when you open a wall. We’d rather find and fix that during the remodel than have you discover it after closing.

Exterior and Structural Work
Roof replacement in Tiburon runs $8,000 to $20,000. Window replacement runs $4,500 to $15,000. The difference between a coastal-spec installation and a standard one is the hardware: we specify hot-dip galvanized or 316 stainless fasteners, marine-grade sealants, and flashing details that hold up to fog-driven moisture. It costs a bit more up front. It costs far less than re-doing the work in six years.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Construction Company in Tiburon
As a Construction Company in Tiburon, we handle the projects that require full general-contracting scope: home additions, garage conversions, deck rebuilds, and structural remediation. Home additions in Tiburon typically run $45,000 to $130,000. Garage conversions land between $30,000 and $80,000. Those are real ranges, and they reflect the engineering and permitting requirements that come with building on a peninsula where so many parcels sit on or beside documented landslide zones.
Foundation and Retaining Wall Work
Because so many Tiburon lots sit on steep slopes or bluff edges, a grading or foundation permit here often triggers geotechnical reports and design-review scrutiny that the identical job a few miles inland never sees. We budget for that engineering review up front, so the permit doesn’t stall mid-draw. We also handle retaining walls, pier-and-grade-beam foundations, and erosion mitigation as part of the same permitted scope.
Full Property Renovation
Brookside’s scope runs from foundation to finish, inside and out. Fencing, hardscaping, hardscape patios, and deck construction sit alongside kitchen and bath work under one contract. If your Tiburon property needs the house and the site addressed together, we can do that without handing you a stack of different contractor invoices to chase.
Trusted Brands We Service in Tiburon
Your project, your brands. We match the material to the project rather than pushing whatever single vendor supplies. For Tiburon’s coastal exposure, we routinely install fencing and railing systems from Bufftech and ActiveYards, both of which hold up to salt air far better than powder-coated steel. For hardscaping on slopes and terraces, we work with Belgard and Unilock paver systems, selected because their joint tolerances and base specs work well on hillside sites where drainage matters. We keep local stock and order direct for Tiburon jobs, which keeps turnaround tight even when a specific product line runs long elsewhere.
See the difference
Before
After
Before
After
Before
AfterCommon General Contractor Problems We See in Tiburon Homes
- Salt-fog fastener failure. Electro-galvanized screws and hangers, the inland standard, can chalk and corrode within three to five seasons of Tiburon’s marine fog. We specify hot-dip galvanized or 316 stainless for every exterior connection.
- Undersized or unpermitted foundations. Many early-to-mid-20th-century hillside cottages in Tiburon sit on foundations that were never engineered for the slope they’re on. During remodels, we regularly find missing anchor bolts and cripple walls that need bracing before any finish work can proceed.
- Hillside drainage and erosion. Winter storm runoff off the steep slopes above Main Street and the Old Rail Trail moves fast. Poorly graded retaining walls and unsealed paver joints fail under that water load, and standard caulk fails at window and door perimeters within a few fog seasons.
- Permit stalls from skipped geotech. A homeowner starts a foundation or retaining-wall scope without a geotechnical report, then the permit office asks for one mid-review. Now the project waits while an engineer gets scheduled. We catch this before the application goes in.
Pricing for General Contractor in Tiburon, CA
Here’s the honest version. The coastal-spec job costs more up front than the same scope a few miles inland, and that gap is real. Below are the ranges we quote most often in Tiburon.
| Project | Typical Tiburon Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
The gap between coastal-spec and inland-spec is mostly hardware and sealant: hot-dip galvanized or stainless fasteners, marine-grade flashing and caulk, treated or composite posts instead of plain fir. That runs maybe 8% to 15% more on the line item. The inland-spec version fails within a decade and costs far more to tear out and redo. We’d rather quote the durable spec the first time. Call (833) 725-3508 for a free estimate and a written line-item quote.
We Also Serve Cities Near Tiburon
Beyond Tiburon, our crews work regularly in Belvedere, Sausalito, Marin City, and the Chinatown area of San Francisco. The coastal-spec material decisions we make for Tiburon apply equally across those hillside and waterfront communities. Call (833) 725-3508 to confirm coverage for your street.
Serving Tiburon, CA — Our Local Coverage Area
We’re based in the Tiburon area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About General Contractor in Tiburon
Because the materials that hold up to Tiburon’s salt fog and steep-slope runoff cost more: hot-dip galvanized or 316 stainless fasteners, marine-grade sealants, treated or composite posts, and flashing details built for fog-driven moisture. The gap is usually 8% to 15% on affected line items. The inland-spec version fails within a few seasons and costs more to redo than the coastal spec would have cost the first time. Call (833) 725-3508 for an exact line-item quote.
Yes, almost always. Because so many Tiburon parcels sit on or beside documented landslide zones, the town’s permitting process routinely requires a geotechnical report for grading, foundation, or retaining-wall scopes that would not trigger one a few miles inland. We build that report into the schedule and budget up front, which keeps the permit moving instead of stalling mid-draw.
We write fixed-scope contracts with line-item pricing and no change orders unless you request a change in writing. On older Tiburon homes, we also walk the site with you before the contract is signed and flag likely hidden conditions, like undersized foundations or failed flashing, so the quote reflects reality instead of a best-case scenario.
Inland-spec uses electro-galvanized fasteners, standard caulk, and untreated fir posts. Coastal-spec, which is what we specify in Tiburon, uses hot-dip galvanized or 316 stainless hardware, marine-grade sealant at every perimeter joint, and treated or composite structural members. The coastal spec costs more up front and lasts substantially longer in salt air.
Because the town’s hillside ordinances, design-review board, and coastal rules create a permitting layer that a flatland contractor can easily trip over. A legitimate permit also protects you at resale: unpermitted foundation or envelope work on a Tiburon hillside lot is a liability, not a negotiating point. We pull permits, pass inspections, and document everything.
Written by Nate Burrell, Owner at Brookside Contractors, serving Tiburon and the surrounding Marin County peninsula.