Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Burlingame, CA | Brookside Contractors
We’re Brookside Contractors, and we install and repair Belgard pavers, retaining walls, and porcelain pavers across Burlingame. We’re an independent hardscape contractor, not a manufacturer-authorized dealer, which means our crews have spent years learning Belgard’s product lines without being locked into one supplier’s catalog. The thing that makes our Belgard work different in Burlingame is simple: we know what happens when you lay Catalina pavers on a 1925 lot where the original soil was never compacted to modern standards, because we’ve opened enough of those yards to see it firsthand. Call (833) 725-3508 for a free estimate on your Belgard project.
Why Burlingame Residents Choose Us for Belgard Service
Belgard makes a deep catalog of paver lines, wall systems, and porcelain pavers. We work with the full range: Catalina, Urbana, and Dimensions pavers; Anchor, Diamond, and Weston wall blocks; Metropolis and Shadow Hill porcelain. Knowing the product lines is table stakes. What matters in our Burlingame service area is knowing what happens to those products after five winters of marine moisture, downspout discharge, and clay-heavy soil that doesn’t drain the way the manufacturer’s spec sheet assumes it will.
Nate Burrell, our owner and Burlingame General Contractor, trained in construction technology at Gavilan College and spent nearly two decades on job sites throughout South Santa Clara County before we expanded hardscape work up the Peninsula. That background shapes how we approach every Belgard job in Burlingame: we read the site, not just the product manual. When a 1920s bungalow on a tight Easton lot needs a paver patio, the base prep matters more than the paver selection. We’d rather tell you that before we start than discover it halfway through.
Our Belgard sales & service work covers everything from new patio and driveway installation to localized settlement repair and re-sanding on older installations. We respond quickly, quote honestly, and we don’t push a full replacement when a regrade and re-sand will do the job.
Styles & brands we work with
Common Belgard Construction Problems We Solve in Burlingame
Here’s what we see most often when we’re called out to a Belgard project in Burlingame:
- Efflorescence and joint sand erosion on Catalina and Urbana pavers. Burlingame’s wet winters saturate paver joints, and when downspouts discharge directly onto patios, the polymeric sand washes out over a season or two. You get white mineral deposits on the surface and pavers that shift underfoot. We regrade the drainage path, re-sand with a quality aftermarket polymeric sand, and seal where it makes sense.
- Base settlement and paver shifting on pre-1940 lots. In Burlingame Park and Easton, the original soil was rarely compacted to modern standards. A patio that looked flat for the first five years starts to heave and sag. We lift the affected area, re-compact the base properly, and re-lay the pavers. If the base failure is widespread, we’ll tell you straight: partial repair won’t hold.
- Freeze-thaw spalling on older Belgard pavers. Burlingame’s frost-free climate doesn’t eliminate moisture cycling. Marine air keeps pavers damp through winter, and older pavers that weren’t spec’d for repeated wet-dry cycles start flaking at the surface. We can replace spalled units with matching Belgard OEM pavers where color batches align.
- Retaining wall block cracking and bulging from hydrostatic pressure. Belgard Anchor and Diamond walls are solid systems, but Burlingame’s clay-heavy soils hold water. Without adequate drainage behind the wall, pressure builds until blocks crack or the wall leans. We rebuild with proper drainage aggregate and weep holes so the wall sheds water instead of fighting it.
- Poor drainage on paver driveways that pitch toward the house. On tight Burlingame lots, we regularly see driveways that send water toward the foundation. We correct the pitch during installation or retrofit with channel drains tied into existing downspouts.
Belgard Service in Burlingame: What Local Conditions Mean for Your Equipment
Here’s the truth most generic Belgard pages won’t tell you: Burlingame’s 1910s-to-1940s commuter-town housing stock means almost every Belgard project here is a retrofit onto original lath-and-plaster walls and shallow pre-code foundations. When we tie a paver patio or driveway into an existing 1920s bungalow, we routinely open up walls or dig along the foundation line and find unpermitted past additions, old knob-and-tube wiring, or a foundation that was poured four inches thick in 1928. That means a paver installation in Burlingame is rarely just about the pavers. We find knob-and-tube wiring running through exterior walls that needs re-routing before we can pour a proper base. We find downspouts that empty directly where your new patio is going. And we find clay soil that has been holding water against the foundation for decades. You can’t fix those things from a spec sheet. Our crews handle the discovery work because we’ve done it enough times to know what to look for. That’s the difference between a patio that looks good for one summer and one that’s still flat and tight five years later.
Belgard Models & Products We Service in Burlingame
We install and service Belgard’s full paver and wall catalog. On the paver side, we work heavily with Catalina (the most common line we see in Burlingame yards), Urbana, and Dimensions. For retaining walls, Anchor and Diamond are the most common systems on residential lots, with Weston Wall for taller or more structural applications. For porcelain pavers, we’ve installed Metropolis and Shadow Hill on several Belgard repair in San Mateo area patios where homeowners want a cleaner, more contemporary surface.
When it comes to parts, we use Belgard OEM pavers and wall blocks whenever possible, because color and dimensional consistency matter when you’re matching an existing installation. For joint sand and drainage aggregate, we specify quality aftermarket products that outperform the basic offerings and hold up better to Burlingame’s wet-dry cycles. We stock common paver profiles locally for faster turnaround on Burlingame repairs.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Burlingame
Belgard paver projects in Burlingame start around $3,500 for a modest patio and go up from there depending on size, access, base condition, and drainage work. Here’s what you can expect for the two most common projects:
| Project | Price Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
What drives the cost in Burlingame specifically? Base prep. On a 1920s lot where the soil was never properly compacted, you’re paying for excavation and re-grading before the first paver goes down. Drainage tie-ins add cost too, especially when downspouts need to be re-routed. A free estimate from us includes a site walk, a written line-item quote, and an honest read on whether your existing base can be salvaged. Call (833) 725-3508 to schedule yours.
Serving Burlingame, CA — Our Local Coverage Area
We’re based in the Belgard service in Highlands-Baywood Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Burlingame
Catalina and Urbana are both solid performers, but the paver line matters less than what’s under it: a properly compacted base and drainage that moves water away from the pavers. We’ve seen every Belgard line fail on poor base prep and every line hold up beautifully on proper prep.
Most patios under 30 inches in height don’t require a permit, but driveways and retaining walls over a certain height often do in Burlingame. We pull permits when they’re needed, and we’ll tell you upfront whether your project triggers one. Call (833) 725-3508 and we’ll walk you through it.
Yes, in most cases. We use Belgard OEM pavers for replacement work, but color batches shift over time, so there may be a slight difference between old and new. We’ll show you samples before we start so you know exactly what you’re getting.
Hydrostatic pressure. Burlingame’s clay soil holds water against the back of the wall, and without proper drainage aggregate and weep holes, that pressure cracks blocks or pushes the wall out of plumb. We rebuild with adequate drainage to prevent the same failure from recurring.
Most Burlingame homes are 70 to 110 years old, which means we’re almost always tying new hardscape into shallow foundations, old lath-and-plaster walls, and unpermitted past additions. We handle those discoveries as part of the job, not as a surprise change order. For an exact quote on your property, call (833) 725-3508.
Service Areas Near Burlingame
We serve Burlingame and the surrounding Peninsula communities. Our crews regularly work in Morgan Hill, San Martin, and Gilroy, and we extend Belgard service to Belgard service in Hillsborough and Belgard service in Millbrae. If you’re in a neighboring city and planning a Belgard paver or wall project, reach out and we’ll tell you if we can get a crew to you.
Book Your Belgard Service in Burlingame Today
Do it once, do it right – everything else is just a future repair bill. If you’re planning a Belgard paver patio, driveway, or retaining wall in Burlingame, call (833) 725-3508 to schedule your free estimate. We’ll walk the site, talk through your options, and give you a written quote before you commit to anything.
Written by Nate Burrell, Owner at Brookside Contractors, serving Burlingame and the surrounding Peninsula communities for over a decade and a half in construction.