Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Felton, CA | Brookside Contractors
Homeowners across Felton rely on Brookside Contractors, a Felton General Contractor, for independent CGI cabinet installation, repair, replacement, and full kitchen remodeling. The difference with us: we know how Santa Cruz County fire code, steep wooded lots, and the San Lorenzo Valley’s wet winters affect CGI cabinetry in ways a valley-town installer never would. We don’t sell CGI boxes and we don’t work for the manufacturer, so our only interest is getting your install to survive Felton’s specific conditions. Call (833) 725-3508 for a free estimate.
Why Felton Residents Choose Us for CGI Service
Most cabinet contractors in this area learn their trade in flat, tract-home kitchens. Felton isn’t that. We’ve spent years fitting, repairing, and replacing CGI cabinets in hillside homes where floors aren’t level, north-facing walls collect winter condensation, and the building department you answer to is Santa Cruz County, not a city hall, unlike our CGI in Scotts Valley work where city jurisdiction applies. Nate Burrell, our owner and general contractor, grew up around South Santa Clara County job sites and trained in construction technology at Gavilan College before spending two decades doing structural remodels that hold up. That structural eye matters when a CGI cabinet run needs shimming, blocking, and re-levelling before a single door goes on. Do it once, do it right – everything else is just a future repair bill.
We’re an CGI sales & service provider in the independent sense: we install, repair, replace, and remodel with CGI product lines, but we’re not manufacturer-affiliated or authorized. That independence means we recommend replacement only when it’s actually the better spend, not because a rep has a quarterly target. When your existing CGI run is salvageable, we use OEM CGI doors, drawer fronts, and hardware to keep the original cabinet boxes. When hinges or slides are the weak point, we move to quality aftermarket components that outperform what shipped originally. And when casework is water-damaged beyond saving, we tell you plainly.
We also serve the full Felton service area, including 95018 and the surrounding San Lorenzo Valley.
Styles & brands we work with
Common CGI Construction Problems We Solve in Felton
Five issues show up on Felton CGI installs more than anywhere we work in the valley:
- Frameless boxes racking and door reveals going out of square. CGI Euro-style full-overlay frameless cabinets depend on a flat floor. Felton hillside homes settle and shift on expansive clay, and when a floor sags a quarter inch, frameless boxes rack and door gaps go uneven. We re-level and block before we hang doors, so reveals stay consistent.
- Painted and thermofoil door faces blistering on north-facing walls. Redwood-shaded cabins in Felton stay damp. Winter condensation sits on north-facing walls and attacks painted CGI door faces and thermofoil edges. Peeling and blistering is the symptom; the fix is better site moisture management plus a door finish that tolerates humidity.
- Particleboard and MDF casework swelling at the toe kick and sink base. Atmospheric-river storms off the Santa Cruz Mountains dump water into homes through failed flashing, slow plumbing leaks, and crawlspace moisture. MDF and particleboard soak it up. If the box is soft, we say so – patching swollen casework is short-lived and replacement is the better spend.
- Countertop seams and cabinet-to-wall caulk joints cracking. As decks, roofs, and additions shift on steep, root-heavy lots, the movement telegraphs into the kitchen. Caulk joints crack, seams separate. We plan for movement with proper blocking, expansion-tolerant detailing, and joint materials that actually flex.
- Water-damaged sink bases from river-valley humidity cycles. The San Lorenzo River keeps Felton’s ambient moisture higher than the valley floor. Sink cabinets are the first casualty. We replace compromised boxes and upgrade to moisture-resistant materials where the site calls for it.
CGI Service in Felton: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic CGI page. Felton sits in the wildland-urban interface, and Santa Cruz County fire code – not any city building department – governs roofing and siding materials. That same County Planning & Building review is the counter your kitchen or bath remodel passes through. There is no Felton city building department to file with. What that means for a CGI cabinet or countertop project: your remodel lives inside a building envelope that the County wants hardened for wildfire, not just insulated for comfort. The plumbing and electrical changes we make inside your kitchen walls get reviewed by the same people who check your Chapter 7A-required roofing assembly. We’ve guided enough Felton kitchens through that process to know exactly what triggers review and what doesn’t. A cabinet swap doesn’t; moving a sink line does. Getting that distinction wrong costs weeks.
On a steep, redwood-shaded lot in the Felton Grove area off the San Lorenzo River, our crew tore out a 1990s CGI cabinet run whose sink base was swollen and whose painted doors had peeled on the north-facing wall. We re-leveled and blocked the cabinet line to correct the sagging floor, then set new CGI shaker boxes with a quartz top, and filed the plumbing changes through Santa Cruz County before closing up the wall. That project failed the way Felton kitchens fail – water, slope, and shade. It also got fixed the way Felton kitchens need to be fixed – structural correction first, finishes second.
CGI Models & Products We Service in Felton
We work across the CGI product lines most common in Felton’s mountain homes and remodeled cabins:
- CGI Euro-style full-overlay frameless cabinets – the modern look that demands a level floor. We shim, we block, we correct before we install.
- CGI shaker-style painted and stained cabinetry – the workhorse of Felton kitchens. We know which finishes tolerate redwood shade and which don’t.
- CGI quartz and granite countertop programs – cut, fit, and sealed for a house that never stops moving.
- CGI ready-to-assemble and semi-custom cabinet lines – we handle RTA assembly and bring semi-custom runs up to full-custom fit standards.
Our parts approach is simple: OEM CGI doors, drawer fronts, and hardware whenever a repair keeps your existing run intact; quality aftermarket hinges, slides, and leveling systems when the original components are the weak point. We stock common hardware locally so a Felton repair doesn’t wait on a freight truck from the manufacturer’s warehouse, and our CGI service in Lompico benefits from the same local inventory. For cabinet installs, refacing, and countertop work, your project stays moving.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Felton
What you’ll pay for CGI work in Felton depends on scope, site conditions, and how much structural correction your hillside home needs before cabinets go in. Here are the ranges we quote for the Felton market:
| Project Type | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Two CGI projects in Felton with the same cabinet line can land at very different prices because one has a level floor and the other needs blocking and re-levelling first. Our free estimate walks your specific site and gives you a written line-item range, not a vague ballpark. Call (833) 725-3508 to schedule one.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Felton
No city permit exists in Felton because there’s no city building department – Santa Cruz County Planning & Building handles all construction review here. A straight cabinet swap doesn’t require a permit, but moving sink lines, electrical runs, or opening walls does. We file through the County when your job needs it, and we’ll tell you up front which path your project takes.
Winter condensation sits on shaded north-facing walls and attacks painted and thermofoil door faces. Redwood canopy keeps the sun off your exterior, which means interior wall cavities stay cooler and wetter than you’d expect. The fix is better moisture management plus a door finish and hinge hardware that tolerate the humidity. Call (833) 725-3508 if you’re seeing peeling or blistering – early replacement of door faces is cheaper than a full run later.
Sometimes, but not always. Frameless CGI Euro-style boxes need a flat, stable floor, and Felton’s expansive clay plus slope movement means floors often aren’t. We check level first, correct with shims and blocking where needed, then install. Skipping that step is how door reveals go out of square within a year. Every Felton install gets this check as standard.
Cabinets and countertops are interior finishes, so they don’t change your exterior Chapter 7A wildfire compliance. But any remodel that touches plumbing, electrical, or walls goes through Santa Cruz County review as part of the same building envelope the fire code also governs. We manage that County review so your kitchen remodel doesn’t accidentally trigger a code issue on something else.
If the boxes are solid and square, refacing with OEM CGI doors and drawer fronts is a fraction of replacement cost and often the right call. If the casework is swollen, racked, or water-damaged, refacing is lipstick on a soft box – you’ll pay twice. We’ll show you the difference with a straight assessment during your free estimate. Call (833) 725-3508 to schedule.
Service Areas Near Felton
Our Felton work regularly takes us through the San Lorenzo Valley and into the surrounding mountain and foothill communities. We also provide CGI service in Ben Lomond, just up the river, and CGI service in Prunedale for homes closer to the coast. We cover Morgan Hill, San Martin, and Gilroy in the valley, plus Day Valley and Corralitos along the mountain edge.
Book Your CGI Service in Felton Today
Your CGI kitchen should be built to survive Felton’s slopes, moisture, and County code review. Call (833) 725-3508 to schedule a free estimate. We’ll walk your site, check the floor, and give you a clear plan with real numbers before any work begins.
Written by Nate Burrell, Owner at Brookside Contractors, serving Felton and the San Lorenzo Valley.