Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Remodeling Company in Felton, CA
Felton home renovation means working with steep redwood lots, older mountain construction, and Santa Cruz County’s wildfire building codes. Brookside Contractors handles full home renovation in Felton from foundation and drainage upgrades through kitchens, baths, roofing, and ADUs under one license and one point of contact. We’ve served Felton since 2011, and we plan every job around the San Lorenzo Valley’s rain, slopes, and permit process. Call (833) 725-3508 for a free estimate.
Why Felton Homes Are Different
Felton sits in the Santa Cruz Mountains just west of the San Lorenzo River, and the housing stock reflects that terrain. Many homes are older mountain cabins and redwood-era builds from the 1940s through the 1970s, with mid-century hillside houses and scattered custom builds on large wooded parcels mixed in. These structures were often built before modern drainage standards, and decades of intense winter rain have taken a toll on foundations, decks, and roof assemblies.
The local angle matters for anyone planning construction here. Felton gets hit by atmospheric-river storms that dump heavy rain in short windows, so erosion control, roof water management, and proper grading are not afterthoughts. Summer brings wildfire risk in the wildland-urban interface, and Santa Cruz County fire code, not a city building department, governs roofing and siding materials. Chapter 7A requirements for fire-resistant assemblies are standard on Felton re-roofs and exterior renovations. Root-heavy clay soils expand and shift with the seasons, so a hillside addition or deck often needs engineering for steep slopes and soil movement. Permits go through Santa Cruz County, and the process accounts for narrow mountain roads and septic or well constraints that flatland contractors rarely deal with. Brookside Contractors plans for all of this before the first shovel goes in.
Styles & brands we work with
Our Main Felton Services
Felton homeowners call us most often for two things: full general contracting on complex hillside jobs, and whole-home remodeling that brings older mountain houses up to current code and comfort standards.
General Contractor in Felton
Acting as your general contractor in Felton means coordinating excavation, foundation work, framing, roofing, windows, and finishes on sites where access and terrain create real constraints. We manage Santa Cruz County permits, schedule trades around mountain road logistics, and keep one line of accountability from structural work through final walkthrough. For hillside additions, deck rebuilds, or full re-roofs in the wildland-urban interface, this coordination is what keeps the project moving. General Contractor in Felton
Home Remodeling in Felton
Home remodeling in Felton usually starts with an older house that has good bones but outdated systems. We open up cramped kitchens, rebuild bathrooms with modern waterproofing, replace single-pane windows with dual-pane units rated for mountain weather, and re-side homes with fire-resistant materials that meet Chapter 7A. Every remodel gets the same treatment: a written scope, a fixed line-item price, and one contractor accountable for every phase. Home Remodeling in Felton
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Home Renovation in Felton
Home Renovation in Felton is the service homeowners reach for when a mountain house needs more than a single-room update. The older housing stock here, much of it built 50 to 80 years ago, often carries failing drainage, outdated electrical panels, single-pane windows, and roofs nearing the end of their life. Winter storms and summer wildfire risk mean Felton renovations must address water management and fire-resistant materials as part of the same scope, not as separate add-ons. Brookside Contractors runs these projects from structural corrections through finished surfaces, with one contract, one schedule, and one accountable team.
We work on whole-home renovations, kitchen and bath overhauls, exterior re-siding, window replacement, and the structural repairs and drainage upgrades that mountain properties routinely need. Because permits run through Santa Cruz County and many sites sit on steep wooded lots, our planning includes erosion control, engineered retaining solutions where needed, and sequencing that respects narrow road access.
Home Renovation Contractors
Signs you need it
Your Felton home has several systems aging at once: a roof past its useful life, windows that leak heat, a foundation with visible cracks, or rooms that no longer fit how you live.
What it costs in Felton
Whole-home renovation in Felton typically runs $45,000 to $130,000 depending on square footage, structural scope, and material tier.
How we do it
We assess the structure and drainage first, produce a fixed line-item scope, pull Santa Cruz County permits, then sequence structural, systems, and finish work so you never live in a stalled job site.
Home Renovation Companies
Signs you need it
You’re comparing home renovation companies because your project spans multiple trades, roofing, windows, framing, finishes, and you want one accountable contractor instead of coordinating four separate crews.
What it costs in Felton
Most Felton renovation projects fall between $45,000 and $130,000, with kitchens at $14,000 to $45,000 and baths at $9,000 to $28,000 when scoped individually.
How we do it
We act as the single contractor across every trade, bring in our vetted crews, manage the schedule and inspections, and carry the job from rough work through paint and trim.
What Home Renovation Costs in Felton
| Item | Typical range in Felton |
|---|---|
| Home Addition | $45,000 – $130,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
How long does a home renovation take in Felton?
A whole-home renovation in Felton typically runs 4 to 9 months depending on scope, structural work, and Santa Cruz County inspection timing. Mountain access and weather windows in the rainy season can add a few weeks. Call (833) 725-3508 to get a realistic schedule for your project.
Do I need Santa Cruz County permits for a Felton renovation?
Yes, nearly all renovation work in Felton requires permits through Santa Cruz County, including structural, roofing, window, and plumbing or electrical changes. We prepare and pull the permits and schedule the inspections. Call (833) 725-3508 with your project details and we’ll confirm what applies.
Brands We Service in Felton
We install and service fixtures and finishes from Moen, Delta, Blanco, and American Standard across Felton kitchen and bath renovations. Common replacement parts and trim kits for these brands are stocked locally, so most hardware swaps happen in days, not weeks. See our brands for the full roster from value tier through premium.
See the difference
Before
After
Before
After
Before
AfterPricing for Remodeling Company in Felton, CA
| Service | Typical range in Felton |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Roof Replacement | $8,000 – $20,000 |
| Window Replacement | $4,500 – $15,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
| Impact Window Installation | $8,000 – $25,000 |
Steep site access, engineered retaining, septic or well constraints, and Chapter 7A fire-rated materials push costs toward the upper end of these ranges in Felton. Brookside Contractors gives every Felton client a fixed line-item price before work starts, and we don’t change that number without a written change order you approve first.
Neighborhoods We Serve in Felton
We work throughout the San Lorenzo Valley side of Felton, from the flat pockets near the river up into the redwood lots and hillside roads that define the area. Our crews know the access patterns, the soil behavior, and the county permit rhythms in each pocket of the 95018 ZIP code.
- Felton proper near Highway 9 and Graham Hill Road
- Forest Lakes and the surrounding ridge streets
- Lompico Road corridor toward Lompico
- Zayante and the hillside parcels off Zayante Road
- Mount Hermon Road area toward Scotts Valley
We typically schedule estimates in Felton within a few business days, and we group city visits so we can see multiple nearby sites in one trip.
Service Area – Cities Near Felton
Brookside Contractors bases its Bay Area operations out of Los Gatos and serves Felton and the surrounding mountain communities. We also work regularly in Mount Hermon, CA, Ben Lomond, CA, Lompico, CA, and Scotts Valley, CA, where the same mountain terrain and county permit process apply.
Serving Felton, CA — Our Local Coverage Area
We’re based in the Felton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Remodeling Company in Felton
Yes. Brookside Contractors prepares, submits, and manages Santa Cruz County permits for Felton remodeling and construction work, including structural, roofing, window, electrical, and plumbing permits. We schedule inspections and keep the permit record clean through final sign-off. Call (833) 725-3508 to confirm what your specific project needs.
We work on steep lots throughout Felton regularly. We sequence deliveries for narrow mountain roads, plan erosion control for the rainy season, and bring in structural engineering when slopes or soil conditions require it before we write the scope and price.
Most Felton renovation projects start within 3 to 8 weeks of a signed contract, depending on permit lead time with Santa Cruz County and the availability of engineered plans if the scope requires them. Estimates are free. Call (833) 725-3508 and we’ll give you a straight answer on timing for your project.
Call Brookside Contractors at (833) 725-3508 to schedule a free estimate on your Felton renovation, remodel, roofing, windows, or ADU project. One contractor, every phase, inside and out.
What happens when you call
- 1A real person answersNo phone trees — talk to a local construction pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Felton Customers Say
"Allowances in the contract were realistic rather than artificially low to make the bid look good."
— Paige Reed"He caught an error in the engineer's drawings before it got framed, which would have been an expensive thing to discover later."
— Darius Dawson"Framing crew was meticulous and the walls are straight everywhere. Drywall goes on a lot better when the framing is right."
— Miguel Herrera