Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Burlingame, CA | Brookside Contractors
We’re Brookside Contractors, and we provide independent Jerith repair in San Mateo, installation, and parts replacement across Burlingame. We’re not the manufacturer and not a factory-authorized dealer. What we are is a local general contractor that has installed and repaired hundreds of Jerith aluminum fences on the old, tight lots that define this city. If your Jerith fence is sagging, chalking, or leaning after a winter storm, call (833) 725-3508 and we’ll tell you straight whether it’s a repair or a footing problem.
Why Burlingame Residents Choose Us for Jerith Service
Jerith is the only aluminum ornamental fence line we install, which means our crews know the post-collapse behavior, powder-coat wear patterns, and panel-fit quirks that show up specifically on Peninsula hillside lots. Nate Burrell, our owner and General Contractor – Burlingame, grew up watching cheap crews walk off jobs in South Santa Clara County, and he built Brookside Contractors around the opposite idea: do it once, do it right – everything else is just a future repair bill.
Because we work independent of the manufacturer, we’re not locked into a boxed kit. We spec heavier gauges where a Burlingame property needs them. We adjust custom heights when an old lot line runs irregular. We pour concrete footings to depths that actually hold on the clay and fill common in Burlingame service area. That independence matters when you’re dealing with a 1920s bungalow that has quirks no product catalog ever anticipated. Our Jerith sales & service work carries a workmanship warranty, and we pull permits when the city requires them.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Burlingame
- Powder-coat chalking and pitting on top rails and picket faces. Burlingame’s marine-influenced winters mean wet salt air settles on west-facing fences near the Burlingame Avenue corridor. After a few seasons, the finish goes chalky and starts pitting. We strip, prep, and color-match the powder coat rather than telling you to live with a fence that looks ten years older than it is.
- Post pull-out and racking on old Burlingame Park lots. The original property lines in this neighborhood often sit over loose fill or shallow pre-code footings. When a post lets go, the whole panel line racks. We don’t shim and hope. We pull the post, drill the footing to a proper depth for the soil, and reset it square.
- Gate sag and hinge fatigue on arched-top Jerith gates. Gates installed years ago without a drop rod or upgraded hinges eventually sag at the latch corner. It’s the single most common Jerith gate issue we see in Burlingame, and the fix is usually a hinge replacement plus a drop rod rather than a new gate.
- Panel damage from vehicles or falling limbs along Broadway frontages. Broadway sees real traffic, and limbs come down in winter storms. When panels get bent, matching replacement pickets matter. We source genuine Jerith pickets through authorized distributors whenever the profile is still produced.
- Discontinued profiles on older fences. Jerith has changed panel designs over the decades. If your fence was installed in the 1990s or early 2000s, the exact picket may no longer be in production. We color-match aftermarket pickets when necessary and blend them so the repair doesn’t announce itself from the sidewalk.
Jerith Service in Burlingame: What Local Conditions Mean for Your Equipment
In Burlingame Park and Easton, where we also offer Jerith service in Highlands-Baywood Park, the original 1920s lot lines often run to a shallow pre-code concrete curb or shared post footing that never met modern depth requirements. That means a Jerith fence install there typically requires us to pull a new footing line before the first post can be set. Most fence contractors won’t tell you that until they hit the old curb mid-install and suddenly the price changes. We look for it first, because we’ve done it enough times to know where the old lines hide. It’s the difference between a fence that stands for twenty years and one that starts leaning by year three.
We replaced a failing brown Jerith Traditional fence along the rear property line of a 1923 bungalow in Burlingame Park after a winter storm bent three panels and heaved two posts. Our crew reset the posts on new concrete footings at the correct depth for the shared lot line, swapped in matching pickets and post caps, and added a drop rod to the gate. The fence now lines up true to the old survey pin the neighbor had been disputing. That’s the kind of Burlingame-specific problem you only learn to solve by working here.
Jerith Models & Products We Service in Burlingame
We install and repair the full Jerith lineup we can source through distributors: the Traditional-style aluminum fence in black, the Brentwood style (often in bronze finish), the Provincial style, and the Designer series panels. For repairs, we source genuine Jerith replacement pickets, post caps, and hinge sets whenever the profile is still produced. When a style has been discontinued, we use color-matched custom aftermarket pickets. We keep a working inventory of common black and bronze touch-up materials on our trucks for fast Burlingame turnaround, and the heavier post gauges we prefer to spec are stocked locally rather than drop-shipped.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Burlingame
Jerith fence work in Burlingame depends on lineal footage, access, existing footing condition, and whether we’re matching a discontinued profile. Here are the ranges we quote for the two fence types we install most in this city:
| Service | Typical Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
The spread comes from real variables: a 40-foot rear line with clean access runs at the low end; a 200-foot perimeter with old footings to demo and a shared lot line to survey runs high. We provide written line-item quotes, and the price doesn’t change once work starts unless you change the scope. Call (833) 725-3508 for an exact quote – estimates are free.
Serving Burlingame, CA — Our Local Coverage Area
We’re based in the Jerith repair in San Mateo and Burlingame area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Burlingame
Most residential fences under 6 feet don’t require a building permit in Burlingame, but fence height, location on the lot, and any retaining or grade changes can trigger one. Burlingame also enforces Bay Area Air Quality Management District (BAAQMD) dust rules for any concrete demolition we do during post or footing work. We’ll check the specifics for your address before we quote, and we pull permits when the city requires them. Call (833) 725-3508 and we’ll walk you through what your street needs.
Yes, in most cases. When the original profile is still produced, we order genuine Jerith pickets. When it’s discontinued, we match the powder coat color as closely as the formulation allows and blend the replacement section. On a mature fence with weathering, the match is usually indistinguishable from the street.
Sag happens because the original gate was hung on light hinges without a drop rod, and years of wet winters and gate cycles loosen the post connection. On older Burlingame lots, the post is often set shallow in pre-code fill, which compounds the problem. The fix is usually upgraded hinges, a drop rod, and sometimes a reset post.
Shared lot lines in Easton often follow old survey pins and shallow pre-code curbs. We verify the line against the survey pin before we set any post, and we build footings on our side of the property line unless we have written agreement from the neighbor. That keeps the fence legal and prevents disputes later.
Powder-coat chalking and pitting is cosmetic and repairable unless the aluminum underneath is corroding through. If posts and pickets are structurally sound, we strip, etch, and re-coat the affected sections. Replacement only makes sense when footings are failing or half the panels are bent. Most Burlingame repairs we do cost a fraction of a new fence. Call (833) 725-3508 for an exact quote – estimates are free.
Service Areas Near Burlingame
We serve Burlingame and the surrounding Peninsula, including Hillsborough, Millbrae, San Mateo, and the bayside flats east of El Camino Real. If you’re just over the line, we likely cover you too. See our Jerith service in Hillsborough and Jerith service in Millbrae pages for specifics.
Book Your Jerith Service in Burlingame Today
If your Jerith fence needs work in Burlingame, call (833) 725-3508. We’ll schedule a free estimate, inspect the posts and footings, and tell you straight what it costs to fix or replace.
Written by Nate Burrell, Owner & General Contractor at Brookside Contractors, serving Burlingame and the Peninsula.