Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Mount Hermon, CA | Brookside Contractors
We provide independent Unilock paver installation, repair, and re-leveling across Mount Hermon, CA. What makes our Unilock work different here is simple: we build bases that hold on steep, root-laced, canopy-shaded lots where shallow installs fail. If your Unilock driveway or patio is settling, heaving, or growing moss between the joints, call Brookside Contractors at (833) 725-3508 for a free estimate.
We’re a licensed general contractor, not a Unilock dealer and not affiliated with or authorized by Unilock. That matters because our recommendations come from watching these pavers perform in Mount Hermon’s fog, winter rain, and redwood root zones for years. Nate Burrell, our owner and general contractor, grew up around South Santa Clara County construction and has spent two decades on job sites where the ground fights back. When he says a Unilock base needs to be deeper here, it’s because he’s dug up the ones that weren’t. You can learn more about our broader Unilock sales & service experience across the valley.
Why Mount Hermon Residents Choose Us for Unilock Service
Most contractors in Santa Cruz County can lay pavers. Few understand what Mount Hermon’s specific conditions do to a Unilock installation over five or ten winters. The fog that rolls through the redwoods keeps paver surfaces damp for months at a time. The roots from mature redwoods and cedars move underneath driveways and patios every year. The steep grades mean water moves fast and finds every weakness in a base. We account for all of that before the first paver goes down.
Nate Burrell trained in construction technology at Gavilan College and spent the better part of two decades on job sites throughout South Santa Clara County. His approach on Unilock work is the same as on any other job: match the material to the site, build the base correctly, and don’t cut corners that will fail later. Do it once, do it right – everything else is just a future repair bill. We serve the entire Mount Hermon service area, from the conference grounds to the cabins up the private lanes.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Mount Hermon
- Paver settlement and rutting on sloped driveways. Mount Hermon’s saturated clay-loam soil saturates all winter. A base that’s too shallow or not compacted in lifts will rut under vehicle weight within a few seasons. We re-excavate, add depth, and compact properly.
- Joint sand washout under dense redwood canopy. Constant canopy drip and winter downpours wash polymeric joint sand out of the joints, letting water into the base. That leads to shifting units and moss growth between pavers. We re-joint with a polymer that holds up to Mount Hermon’s moisture levels.
- Heaving and lipping from redwood and cedar root intrusion. Roots push up the bedding layer on older forested lots, creating trip hazards and uneven driveways. We remove the affected field, add a root barrier or geotextile, and reset the pavers level.
- Surface staining and efflorescence on face-mix pavers. Mount Hermon’s fog and shade keep pavers damp, slowing drying and encouraging white mineral deposits or green staining on Umbriano and other face-mix products. We clean, treat, and seal where appropriate.
- Water pooling mid-slope on driveways. When drainage isn’t sloped correctly to the lane or a swale, water pools and undermines the base. We re-grade the bed and redirect drainage before relaying pavers.
Unilock Service in Mount Hermon: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic Unilock page: Mount Hermon’s narrow, winding private lanes and dense redwood canopy mean a paver delivery truck often cannot reach the driveway itself. We’ve done installs where the truck had to stage down at the main road and every pallet of Brussels Block had to be carted upslope by machine or by hand, one load at a time. That changes how you sequence a Unilock install. You can’t just drop three pallets at the top and start laying. You plan the staging area, you plan the path, and you build the cost of that logistics into the estimate up front. On one sloped drive off a narrow private lane in the Mount Hermon camp area, a Brussels Block driveway had rutted and heaved where redwood roots pushed up the bedding over a shallow base. We cut out the affected field, reset the root-affected section with a deeper compacted base and geotextile, relaid the Brussels Block, and finished with polymeric joint sand. The drive now drains to the lane instead of pooling mid-slope. That’s the kind of unglamorous work that separates a driveway that lasts from one that fails in three years.
Unilock Models & Products We Service in Mount Hermon
We install and repair the full range of Unilock products you’re likely to see in Mount Hermon. Brussels Block is the tumbled traditional paver that fits older cabins and forested lots. Beacon Hill Flagstone gives the irregular, natural-stone look that works well on winding pathways. Town Hall is the workhorse interlocking paver, available in permeable and standard versions. Umbriano is the smooth, granite-look face-mix paver often used for patios and pool decks.
When a repair needs to blend with existing courses, we use Unilock-manufactured units and matching edge restraints. For the non-visible components, we use quality aftermarket polymeric joint sand and geotextile where it outperforms the original spec. On small repairs we replace only the failed field. When settlement or root damage is widespread across the base, honest re-lay beats patching every time. Most common Unilock units are available through our local supply chain within a few days, so Mount Hermon repairs don’t sit waiting for weeks.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Mount Hermon
Unilock paver work in Mount Hermon falls within these ranges. What drives the final number is base depth, access difficulty, and whether we’re repairing a section or rebuilding the full base.
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
A free estimate includes a site visit to check base depth, drainage, root exposure, and delivery access. You’ll get a written line-item quote, not a verbal ballpark. Call (833) 725-3508 to schedule yours.
Serving Mount Hermon, CA — Our Local Coverage Area
We’re based in the Mount Hermon area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Mount Hermon
Yes, and we do it regularly. The key is base depth, compaction in lifts, and drainage control. Mount Hermon’s clay-loam saturates all winter, so a shallow base will rut and slide. We build deeper bases and add geotextile where grades exceed what standard installs assume. Call (833) 725-3508 and we’ll assess your specific slope and soil before quoting.
Roots lift the bedding layer and push pavers out of plane, creating heaving and lipping. We cut out the affected areas, remove or redirect surface roots where possible, install a geotextile barrier, and reset the pavers on a fresh compacted base. Root barriers help slow regrowth, though no system stops a determined redwood forever.
Mount Hermon’s fog, dense canopy shade, and frequent winter rain keep paver surfaces damp and slow to dry. That constant moisture invites moss and algae growth in the joints and on the surface. We clean the pavers, replace washed-out joint sand with a quality polymeric product, and can apply a sealant that resists moss. Call (833) 725-3508 for an evaluation and exact quote.
Often not. The narrow, winding private lanes under dense redwood canopy prevent full-size delivery trucks from reaching many driveways. We plan staging at the nearest accessible road and cart materials upslope by machine or hand, which adds labor but protects your lane and surrounding trees. We’ll map the access route during your free estimate.
If settlement is localized to one or two areas and the base elsewhere is sound, targeted repair makes sense. If the base was built too shallow across the whole driveway or roots have compromised most of the bedding layer, full re-excavation and re-lay is the honest answer. Patching a failed base just moves the problem. We’ll tell you which applies to your driveway, not which is more profitable for us.
Service Areas Near Mount Hermon
We run Unilock installs and repairs throughout the San Lorenzo Valley and South County. In addition to Mount Hermon, our crews regularly work in Unilock service in Santa Cruz, Unilock service in Felton, Ben Lomond, Boulder Creek, and Scotts Valley. If you’re in a neighboring community with similar canopy and grade challenges, the same approach applies.
Book Your Unilock Service in Mount Hermon Today
We know what Mount Hermon does to pavers, and we know how to build against it. Call (833) 725-3508 to schedule your free Unilock estimate. We’ll walk your site, check the base, the drainage, the roots, and the access, and give you a straight answer.
Written by Nate Burrell, Owner at Brookside Contractors, serving Mount Hermon and the San Lorenzo Valley.